Saramonic SPMIC510 Di Manuel utilisateur
Compact Stereo Microphone
for iOS Devices with a
Lightning Connector
User Manual
SPMIC510
Thank you for choosing Saramonic!
Saramonic SPMIC510 Di is a compact stereo
condenser microphone designed for iOS devices
with a Lightning connector.
The microphone is equipped with two condenser
microphone elements positioned in an X/Y
configuration. It provides superb stereo sound that
is ideal for vlogging, live streaming, interviews,
ENG and mobile video production.
Highlights
• Plug-and-play
• Dual Condenser Elements in X/Y Pattern
• Compact and lightweight design. Ideal when using
with smartphone accessories, like gimbals
• For Apple iOS Lightning Devices
Lightning connector
LED power indicator
Microphone capsules
Setup Guide
1. Plug the microphone directly into the lightning
connector of your iOS device.
2. For optimum signal, make sure the arrow mark on the
microphone is pointed at the sound source.
3. Click the Settings- General - About- Stereo microphone,
to ensure the microphone is recognized by your iOS
device.
4. Go back to the home page, open the Camera or
Recording App, the microphone LED indicator will turn
blue, then you are ready to record.
Note: To avoid feedback, please turn down the volume
of your recording device and unplug the 3.5mm jack
headphone (when using an iPad).
Common Technical Issues and Solutions
• If you have any problems when using SPMIC510 Di,
please refer to below list:
Issue Reason Solution
Mic is not recognized by
recording device Mic is not well connected Unplug and reconnect
Mic is not picking up
sound
Mic not selected in app's
settings
External Lightning mic
must be selected in
app's setting
No sound when you
plug out and replug the
mic during recording
You may use a
3.5mm headphone
simultaneously
Plug out both the
headphone and mic,
and try again.
Sound is distorted
The input level of your
recording app is too high
Lower the input level
before recording
You are monitoring with
a mono headphone
Choose a stereo
headphone
The mic is picking up too
ambient sound, not the
subject
1. Recording distance is
too far from the subject
2. The mic's capsules are
pointing in the wrong
direction
1. Get closer to the
subject
2. Make sure the arrow
mark on the mic points
to the sound source
• If you have further questions, please consult your dealer
Specifications
Transducer Type Condenser
Polar Pattern Cardioid (X/Y Pattern)
Audio 48 kHz / 16-bit
Frequency response 45 - 20,000 Hz
Signal to noise ratio 78dB
Output Apple MFI Certified Lightning Connector
Power Supplied by iOS device
Operating temperature -10°C - 55 °C
Dimension (L x W x H) 70 x 18.4 x 26.88mm
Weight 15.5g (0.55oz.)
www.saramonic.com
Saramonic is a trademark registered and owned by Shenzhen DSQN Investment CO., LTD.
COPYRIGHT 2011-2021 SARAMONIC INTERNATIONAL ( A brand of DSQN )
Room 2009, Shenzhou Bairuida Bldg, Banxuegang Road, Bantian Street, Longgang District,
Made in China
Table des matières
Autres manuels Saramonic Microphone
Saramonic
Saramonic SPMIC510 UC Manuel utilisateur
Saramonic
Saramonic BTW Manuel utilisateur
Saramonic
Saramonic Vmic Pro Manuel utilisateur
Saramonic
Saramonic SR-TM1 Manuel utilisateur
Saramonic
Saramonic Blink500 ProX RX Manuel utilisateur
Saramonic
Saramonic SR-MV2000W Manuel utilisateur
Saramonic
Saramonic Vmic Manuel utilisateur
Saramonic
Saramonic SmartMic MTV500 Manuel utilisateur
Saramonic
Saramonic SR-M500 Manuel utilisateur
Saramonic
Saramonic Vmic Manuel utilisateur
