Sanyo SFX-11 Manuel utilisateur
Instruction Manual
Introduction
Thank you for purchasing the SFX-11. This international-standard high-speed digital facsimile transceiver has
many outstanding features, including:
●5-page automatic document feed ●Automatic switching between telephone, fax machine
●28-number automatic dialing memory and answering system (connection-ready)
.. Superfine resolution mode .Timer transmission
●Halftone mode ●30-meter roll of recording paper
.13uilt-in telephone handset ●Digital display (16 characters)
.Voice announcement (with auto reception)
In order to use the SFX-11 effectively and keep it in good working order for along time, read this instruction
manual thoroughly and keep it for future reference.
Table of contents
~eGre use]
Unpacking ............................................................ 2
Accessories ........................................................... 3
Part names and functions ...................................... 3
Setting switches ................................................ 4
Operation panel ............................................. 5
installation ................................................. 7
Telephone line and AC connections ..................7
Recording paper ................................................ 9
Confirmation of working (copy ing) ........................ 11
.——— —.
Telephone use=
Phone calls ........................................................ 13
Hold ................................................... 14
Redial ........................... 14
One-touch dial ..................................................... 15
Speed dial ........................................................... 16
Extension telephone/answering machine .............17
—
~Fax use
Original documents .............................................. 19
Transmission ........................................................ 20
Contrast/mode ................................................ 20
placing originaldocuments.............................20
Manual dialing transmission ............................ 21
Automatic dialing transmission ........................ 22
One-touch dialing transmission ....................... 23
Speed-dialing transmission ............................. 24
Redial ........... ............................ 25
Reception ............................................................. 26
Reception modes ............................................ 26
Automatic reception ........................................ 27
Manual reception ............................................ 28
Answering reception ........................................ 29
Remote reception ............................................ 30
Phone reservation ................................................ 31
Copying (enlargement/reduction) .......................... 32
Diagnostic reports ................................................ 33
IProgramming funcq
Menu selection ..................................................... 35
Timer transmission ............................................... 36
Polling reception .................................................. 39
Issuing activity report ........................................... 40
Set mode selection .............................................. 41
One-touch dial memory programming ...............42
Speed-dial memory programming ........................ 44
Entering names ................................................... 47
Printing number list ..............................................49
Header print (setting your station name and
fax number) ...................................... 50
Calendar and clock .............................................. 52
Feature switches .................................................. 54
~Maintenance ~
Jammed original ‘“.’ ................................ 59
Recording paper handling .................................... 60
Cleaning ...................................................... 61
Troubleshooting ................................................... 63
~pecific=
Specifications .......................................... 65
2
Unpacking
To unpack the SFX-11:
1.
2.
3.
4.
5.
6.
7.
Open the carton.
Remove the accessories (handset, recording paper roll, etc.) from the carton.
Remove the fax machine along with the foam braces on both sides.
Remove the polyethylene wrapping around the fax machine.
Remove the transportation tapes.
Save the carton and the foam braces for later storage and/or shipping.
Place the machine where there is access to an AC outlet and a modular phone jack. (Be sure to observe the
precautions below.)
Placement precautions
●
●
●
●
●
✎
Avoid placing the SFX-11 in humid or dusty places, or in places where it will be exposed to excessive heat
(direct sunlight, heaters, etc.).
Do not step on, or set anything on, the AC cord. DAMAGE TO THE AC CORD IS ASAFETY RISK AND CAN
CAUSE AFIRE.
Install the unit only on a stable surface.
Do not connect the SFX-11 to the same AC outlet as appliances that generate large amounts of interference
(heaters with thermostats, appliances with motors, etc.). It is best to use acompletely separate electrical
outlet.
Keep the SFX-11 away from water. If water accidentally enters the unit, unplug the AC power cord immediately
DO NOT SWITCH THE UNIT ON AGAIN. Contact an authorized Sanyo service center or dealer.
Handling precautions
●Do not remove any parts that are held in place with screws. (The SFX-11 does not contain any user-serviceable
items).
●Maintain standard room temperature 5°C – 35°C(410F –95°F) during use. Do not subject the unit to shock or
vibration. Do not move the unit while it is in use.
●Arapid increase in room temperature in cool weather can cause condensation to form inside the unit. If this
happens, wait at least 15 minutes after turning the unit on before attempting to operate it. Failure to do so may
result in paper jams and/or poor print quality.
●When cleaning the cover or operation panel of the unit, wipe gently using adamp cloth to which asmall
amount of aneutral detergent has been added. NEVER USE SOLVENTS OR CHEMICALLY TREATED CLOTHS.
—
n
Accessories
Make sure the accessories listed are included with the unit.
I
. Handset x1.Coiled cord x1●Recording paper x 1
●Adhesive number sheet ●Instruction manual x1
Part names and functions
Rear view
Recording paper exit
switch
Telephone line jack (LINE) -J y~;:n ;::::;
4
Inner view
Document release lever
--------- Paper holder
Green release lever -Document
Setting switches
.+
MODE CONTRAST AUTO/MANU
.:
=] switch -1 1- BuImmlswitch
Document sensor
feed roller
EmEm Switchd
Ringer volume switch A1- Monitor volume switch
5
Operation Panel
OSPEED DIAL Key
@REDIAL/PAUSE
Key
~ERROR Lamp
~DISPLAY
@MENU Key
@SET Key
@ANSWER Lamp
@ANSWER Key
OSTART Key
7
0
0
k
SPEEDDIAL
REDIAL/PAUSEI
TONE
e-
HOLD
SPEAKER
I
—
●Press this key when using speed dial.
—
●Press this key to redial the last number dialed.
●Press this key to insert apause between two digits in anumber being dialed.
●Lights if acommunication error occurs.
●Shows calendar and clock functions, operation guidance, machine status, etc.
—
●Press this key when selecting various functions.
—.
●Press this key to confirm selections.
●Lights when the unit is set to answer mode.
●Press this key to set to answer mode.
●Press to start transmission or manual reception.
6
?
A
I II
MENU ISET IANSWER
@
n
13 14 1
17 18 1
STOP/C
(m)
@COPY Key
@STOP/C Key
@ONE TOUCH Keys
@TONE key
@SPEAKER Key
@HOLD Key
@Number Keys
o-9 #*
COPY START
●Press to make acopy.
●Press to interrupt transmission/reception/copying or to stop the ERROR indicator
lighting.
●Press to cancel various setting and dialing functions and to remove an original
document that has been placed in the unit.
●Frequently dialed numbers can be stored in memory using these 8keys.
The one-touch keys are also used when entering names in memory.
●Press this key to switch from pulse dialing to Touch-Tone dialing.
●Allows you to monitor acall without using the handset.
●Temporarily places acall on hold.
●These keys are used to dial fax and phone numbers and to change various
functions.
I
7
Telephone line and AC connections
●Another telephone and/or answering machine can be connected to the SFX-I 1
through the line cord supplied with the SFX-11 or by the SANYO Dealer. I
//
AC outlet
Connect AC plug into AC outlet.
8
Setting the dialing mode switch
Set the dialing mode switch (DIAL) to the correct position for
your telephone line.
YPush-button Rotary-dialing
telephone telephone
~+1 1I
telephone ~Touch-Tone I
line is /~
>D
L’
Set the switch
to ~m●
[
Continuous
clicking
sounds
Pulse-Dialing
Touch-Tone++ Pulee-Oialing Touch-Tone~Pulse-Dialin$
fyou are not sure which dialing system your telephone is using,
:ontact your telephone company.
—
Autres manuels pour SFX-11
2
Table des matières
Autres manuels Sanyo Télécopieur
Sanyo
Sanyo SFX-33 Manuel utilisateur
Sanyo
Sanyo SFX-32 Manuel utilisateur
Sanyo
Sanyo SFX-11 Manuel utilisateur
Sanyo
Sanyo SFX-110 Manuel utilisateur
Sanyo
Sanyo SFX-33 Manuel utilisateur
Sanyo
Sanyo SFX-P500 Manuel utilisateur
Sanyo
Sanyo SFX-32 Manuel utilisateur
Sanyo
Sanyo SFX-30 Manuel utilisateur
Sanyo
Sanyo SFX-110 Manuel utilisateur
Sanyo
Sanyo SFX-33 Manuel utilisateur
