Santa Fe ULTRA Series Manuel utilisateur

800.533.7533 | Santa-Fe-Products.com Santa Fe ULTRA155/205 Installation & Operation Instructions

Serial Number

Install Date

Sold By

Installation Instructions

Patent: thermastor.com/patents

Santa-Fe-Products.com | 800.533.7533

The  are

ventilating dehumidiers that integrate into the

heating and cooling system to provide the ultimate

in comfort, health and property protection through:

+ Dehumidication

+Optional Outdoor Air Ventilation

+Air Filtration

TS-2019 02/23 Rev A

ULTRA SERIES | ULTRA155/205

* Previously the Ultra Aire 155H/205H.

Español

Versión

La Página

2Santa Fe ULTRA155/205 Installation & Operation Instructions Santa-Fe-Products.com | 800.533.7533

REGISTRATIONS

THE SANTA FE ULTRA155/205 CONFORMS TO UNIFIED STANDARD UL

60335-2-40 AND CSA STANDARD C22.2.60335-2-40.

Safety Instructions........................................................................................3

Assembly & Installation ................................................................................4

Dehumidier Set Up ..................................................................................5-6

Attaching Duct Collars..................................................................................7

Electrical Requirements................................................................................8

Drain Installation...........................................................................................9

Ducting to HVAC Systems ..........................................................................10

Recommended HVAC System Installation ...............................11-12

Alternative HVAC System Installation.......................................13-14

Outdoor Air Ventilation ...............................................................................15

Determine Ventilation Requirements..............................................16

Controls .................................................................................................17-18

Air Filtration.................................................................................................19

MERV Rating Chart ..........................................................................20

Service ...................................................................................................21-22

Warranty ......................................................................................................23

Spanish Version ..........................................................................................24

Santa Fe is committed to manufacturing quality products. To maintain

our standards, product specications may change without notice.

4201 Lien Road, Madison, WI 53704

(800) 533-7533

Thermastor.com | Santa-Fe-Products.com

FOR REPAIR & TECH SUPPORT: 1-800-533-7533 (follow prompts)

or CONTACT US AT: service@santa-fe-products.com

TABLE OF CONTENTS

800.533.7533 | Santa-Fe-Products.com Santa Fe ULTRA155/205 Installation & Operation Instructions

WARNING!

THIS SYMBOL MEANS IMPORTANT INSTRUCTIONS. FAILURE TO HEED THEM CAN

RESULT IN SERIOUS INJURY OR DEATH.

Read the installation, operation and maintenance instructions carefully before installing and

operating this device. Proper adherence to these instructions is essential to obtain maximum

benet from the Santa Fe Whole House Ventilating Dehumidier.

CAUTION!

THIS SYMBOL MEANS IMPORTANT INSTRUCTIONS. FAILURE TO HEED THEM CAN

RESULT IN INJURY OR MATERIAL PROPERTY DAMAGE.

CAUTION!

READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION.

ALWAYS USE CAUTION AND WEAR CUT RESISTANT GLOVES WHEN HANDLING SHEET METAL.

IMPROPER INSTALLATION MAY CAUSE PROPERTY DAMAGE OR INJURY.

INSTALLATION, SERVICE, AND MAINTENANCE MUST BE PERFORMED BY A QUALIFIED SERVICE

TECHNICIAN.

THE DEHUMIDIFIER IS HEAVY. HANDLE WITH CARE AND FOLLOW INSTALLATION INSTRUCTIONS.

NEVER OPERATE A UNIT WITH A DAMAGED POWER CORD. IF THE POWER CORD IS

DAMAGED, IT MUST BE REPLACED BY THE MANUFACTURER, ITS SERVICE AGENT, OR A SIMILARLY

QUALIFIED PERSON IN ORDER TO AVOID A HAZARD.

THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH REDUCED

PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE

OR KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION

CONCERNING THE USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR

SAFETY. CHILDREN SHOULD BE SUPERVISED TO ENSURE THAT THEY DO NOT PLAY WITH THE

APPLIANCE.

WARNING!

120 VOLTS MAY CAUSE SERIOUS INJURY FROM ELECTRIC SHOCK. DISCONNECT

ELECTRICAL POWER BEFORE STARTING INSTALLATION OR SERVICING, AND LEAVE

POWER DISCONNECTED UNTIL INSTALLATION OR SERVICE IS COMPLETED.

SAFETY INSTRUCTIONS

4Santa Fe ULTRA155/205 Installation & Operation Instructions Santa-Fe-Products.com | 800.533.7533



a. Dehumidifier (1)

b. Leveling feet (4)

c. Filter - 16”x20”x2” MERV 13 (1)

OFFON

BEFORE TURNING ON UNIT:

1. CUT AND REMOVE ZIP TIE

2. PLUG HOLES USING

INCLUDED PLUGS

COM

FAN

24V

DEHU

DMPR

COM

FAN

24V

DEHU

DMPR

24V AC

COMP FAN

HONEYWELL REMOTE HUMIDISTAT

WIRING DIAGRAM

QUEST DEH 3000R CONTROL

WIRING DIAGRAM

ASSEMBLY & INSTALLATION

1. 

2. 

d. 10” Round Duct Collar (1)

e. 10” Oval Duct Collar (1)

f. 6” Round Duct Collar (1)

3. 

800.533.7533 | Santa-Fe-Products.com Santa Fe ULTRA155/205 Installation & Operation Instructions

1. 

• The device is designed to be installed indoors in a space that is protected from rain and flooding.

• Install the unit with enough space to access all sides for maintenance and service. The entire shell needs to

be removed in order to do repairs.

• Avoid directing the discharge air at people. The dehumidier should be used in the upright position.

• If used near a water source; be certain there is no chance the unit could fall into the water or get splashed

and that it is plugged into a dedicated circuit and Ground Fault Circuit Interrupter (GFCI) protected outlet.

• DO NOT use the dehumidier as a bench or table.

• DO NOT place the dehumidier directly on structural building members without vibration absorbers or

unwanted noise may result. Place the Santa Fe Ultra155/205 on supports to raise the base of the unit.

• A drain pan with a float switch must be placed under the dehumidier if installed above a living area or above

an area where water leakage could cause damage.

DEHUMIDIFIER SET UP

6Santa Fe ULTRA155/205 Installation & Operation Instructions Santa-Fe-Products.com | 800.533.7533

Electrical Service Access

(Either Side)

Filter 9' Power Cord

Top View

Minimum

Clearance

For Filter

(Either Side)

15"

6" Fresh Air Intake (Optional)

10" Return Air Duct

10" Supply Air Duct

32 3/8"

With Collars Installed

26"

Without Collars Installed

Drain Port

Top View

41 1/2"

With Collars Installed

37 3/4"

Without Collars Installed

Drain Port 9' Power CordFilter

Minimum

Clearance

For Filter

(Either Side)

20"

6" Optional Outdoor Air Intake

10" Return Air Duct

6” Fresh Air

Intake (Optional)

10” Return Air Duct

Electrical Service Access

(Either Side)

The 10” Supply Air Duct (not pictured) is

below the Outdoor Air Intake and the Return

Air Duct. The same amount of clearance

is needed for the 10” Supply Air Duct.

2. 

• Allow sufcient clearance to handle the unit’s overall dimensions as well as the necessary return and

supply ductwork to the unit.

• Allow sufcient clearance for lter removal and to prevent airflow obstruction.

• Electrical service access will require the removal of the outside shell. Allow sufcient clearance around the

unit.

• Locate the dehumidier in an area where the unit’s 9 ft. cord can easily reach.

• Locate the dehumidier in an area where eld wiring the control (low voltage) to the unit will be possible.

• A back draft damper is required in the supply duct of the Santa Fe Ultra155/205, especially when connecting

to the supply ducting system. The backdraft damper prevents supply air from counter flowing through the

Santa Fe Ultra155/205 when it is not operating. The dehumidier’s location should be chosen to allow

installation of this accessory if necessary.

• The Santa Fe Ultra155/205 may be suspended with the hang kit or a suitable alternative from structural

members, ensuring the assembly supports the dehumidier’s base in its entirety. Do not hang the Santa Fe

Ultra155/205 from its’ cabinet.

• Allow for proper drainage and routing of needed drain pipes.

DEHUMIDIFIER SET UP

CAUTION!

REMOVE COMPRESSOR SHIPPING TIE FROM THE UNIT. FAILURE TO REMOVE THE SHIPPING TIE WILL CAUSE

EXCESS VIBRATION TO BE TRANSMITTED TO THE FRAME.

3. 

• The Santa Fe Dehumidier uses a compressor to power the refrigeration

system. To protect the compressor and refrigeration system during

shipping, a plastic tie wrap secures it to the unit’s frame. Remove the tie

wrap by cutting the tie wrap and pulling from the unit as shown. After

removing tie wrap, insert plastic plugs provided into the holes.

800.533.7533 | Santa-Fe-Products.com Santa Fe ULTRA155/205 Installation & Operation Instructions







Outdoor air ventilation is optional. Attach 6” diameter duct to the unit using the screws provided. The 6” duct

should be capped if outdoor air is not desired. If setting up the unit to provide outdoor air ventilation, see page

10.

1. Return Air Inlet

Attach 10” diameter duct collar to the unit with the screws provided.

2. 

Adhere seal onto the back of the oval duct and mount the duct to the front of the dehumidier using the screws

provided.

ATTACHING DUCT COLLARS

SIDE VIEW

FRONT VIEW

6" Optional Outdoor Air Intake

10" Return Air Inlet

10" Supply Air Outlet

CCollars and

hardware are

located here.

8Santa Fe ULTRA155/205 Installation & Operation Instructions Santa-Fe-Products.com | 800.533.7533

The Santa Fe Ultra155/205 plug into a common grounded 115 VAC outlet. Locate the dehumidier in an area where

the cord’s length (9’) easily reaches a 115 VAC electrical outlet. The Santa Fe Ultra155 requires a minimum 15 Amp

circuit. The Santa Fe Ultra205 requires a dedicated 20 Amp circuit. If used in an area that may become wet, a GFCI

protected circuit is recommended. Consult local electrical codes for further information.

Santa Fe offers a variety of control devices for use with the Santa Fe Dehumidier. The control is to be located

remotely from the dehumidier and placed in the space to be conditioned. A low voltage (24 Volt) control MUST be

used with the Santa Fe Dehumidier and MUST be connected with low voltage (18-22 gauge) thermostat wire.

CAUTION!

DO NOT ALLOW THE 24V TERMINAL TO CONTACT THE COM/DMPR TERMINALS ON THE

SANTA FE ULTRA155/205 OR DAMAGE TO THE TRANSFORMER WILL RESULT.

1. 

• Do not install the control where it may not accurately sense the relative humidity such as near HVAC

supply registers, near exterior doors, on an outside wall, near a window, or near a water source.

• The screw terminals on the Santa Fe Ultra155/205 and the control are labeled to prevent confusion.

• Be sure to consult the electrical schematic in the CONTROLS Section (page 12) of this manual or

inside the access panel of the Santa Fe Ultra155/205 before making control connections.

WARNING!

THE REMOTE CONTROLS OF THE SANTA FE ULTRA155/205 ARE POWERED BY A LOW VOLTAGE CIRCUIT

(24VAC) AND MUST NEVER CONTACT OR BE CONNECTED TO A HIGH VOLTAGE CIRCUIT.

CAUTION!

SOME OF THE SCREWS TERMINALS ON THE SANTA FE ULTRA155/205 MAY NOT BE USED WITH

CERTAIN CONTROLS AND SHOULD BE LEFT UNCONNECTED.

2. 

ELECTRICAL REQUIREMENTS

800.533.7533 | Santa-Fe-Products.com Santa Fe ULTRA155/205 Installation & Operation Instructions

The Santa Fe Ultra155/205 generates condensate.

Place a secondary drain pan with a float switch under the dehumidier if it is suspended above a nished area or

in an area where water leakage could cause damage.

A drain trap is required for the dehumidier to run properly (see diagram below). Install a 3/4" threaded male

NPT adapter to the drain pan. Install a drain pipe assembly utilizing 3/4" PVC pipe to transport the condensate

to a drain. Pitch of drain should be 1" per 10'.

An optional condensate pump kit is available for use with the Santa Fe Ultra155/205 and may be installed if lift

is required to dispose of condensate. Condensate is automatically pumped to a remote location when the water

level in the pump’s reservoir rises to close the float switch.

The pump also contains a safety float switch. The white leads from this switch extend from beneath the pump

cover. This switch should be installed in series with the eld wire that connects to the common lead from the

Santa Fe Ultra155/205 to the control panel. If the pump fails, this switch opens the common control circuit and

stops water production before the reservoir overflows. Contact a qualied electrician to install the safety float

switch to the Santa Fe Ultra155/205 dehumidier.



DRAIN INSTALLATION

Dehumidiers commonly use a negative air pressure drain pan. This causes air to flow backwards thru the drain

system which can cause water to pool inside the dehumidier and leak. A drain trap prevents this issue by trapping

water in the pipe to stop air from flowing backwards.

Please see the trap diagram below. This assembly can be made with common ¾” PVC pipe ttings. The pipe

measurements and placement of the cap and vent are critical to the function of the trap. Once trap is assembled, be

sure to ll with water.

Drain

Trap

Drain

Port

4035934

Drain Trap

Drain Port

Secondary Drain Pan

Drain

Trap

Drain

Port

4035934

Drain Trap

Drain Port

Secondary Drain Pan

10”

1.5”

VENT HEIGHT MUST

BE BELOW THE LINE

10 Santa Fe ULTRA155/205 Installation & Operation Instructions Santa-Fe-Products.com | 800.533.7533

CAUTION!

DO NOT CONNECT WITH A STATIC PRESSURE GREATER THAN OR EQUAL TO +0.5 WG.



1. 

• All flexible ducting connected to the Santa Fe Ultra155/205 should be UL listed.

• A short piece of flexible ducting on all Santa Fe Ultra155/205 duct connections is recommended to re-

duce noise and vibration transmitted to rigid ductwork in the structure.

• Use a minimum 10" diameter round or equivalent rectangular duct for total duct lengths of up to 25'. Use

a minimum 12" diameter or equivalent for longer lengths.

• Grills or diffusers on the duct ends must not excessively restrict airflow.

• A length of 8" or more of insulated flex duct or any other vibration isolating material on the outlet of the

Santa Fe Ultra155/205 will reduce air noise from the blower.

• Effective dehumidication may require that ducting be branched to isolated, stagnant air flow areas.

When ducting to two or three areas, use 8" or larger diameter branch ducting. When ducting to four or

more areas, use 6" or larger diameter branch ducting. Provisions must be made to provide airflow from

supply locations to the central return location. Proper air distribution is important to ensure even humid-

ity control and heat distribution throughout the structure.

• DO NOT locate the return in a bathroom or a kitchen.

2. 

CAUTION! ALLOW FOR ENOUGH SPACING TO PROPERLY ROUTE YOUR RETURN AND

SUPPLY CONNECTION

a. 





 

*Per Unit.

*Brackets sold separately.

3. 

CAUTION! INTERNAL STOPS LIMIT FEET HEIGHT. DO NOT TIGHTEN FEET BEYOND THE

RESISTANCE PROVIDED BY STOPS.



*NOTE: LEVELING FEET HOLD

BRACKET IN PLACE

DUCTING TO HVAC SYSTEMS

*RECOMMEND 6” TO 8” OFF GROUND

SEE MANUAL FOR MORE DETAILS

Autres manuels pour ULTRA Series

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Santa Fe Déshumidificateur

Santa Fe

Santa Fe Clasic 4029700 Manuel utilisateur

Santa Fe

Santa Fe IMPACT XT Manuel utilisateur

Santa Fe

Santa Fe ULTRA Series Instructions d'installation

Santa Fe

Santa Fe IMPACT105 Instructions d'installation

Santa Fe

Santa Fe ULTRA Series Instructions d'installation

Santa Fe

Santa Fe 4034160 Manuel utilisateur

Santa Fe

Santa Fe ULTRA Series Manuel utilisateur

Santa Fe

Santa Fe ULTRA Series Instructions d'installation

Santa Fe

Santa Fe OASIS105 Instructions d'installation

Santa Fe

Santa Fe Advance Manuel utilisateur

Santa Fe

Santa Fe IMPACT Series Instructions d'installation

Santa Fe

Santa Fe IMPACT XT Manuel utilisateur

Santa Fe

Santa Fe Max Dry Dual XT Manuel utilisateur

Santa Fe

Santa Fe Compact 2 Manuel utilisateur

Santa Fe

Santa Fe Advance 2 Manuel utilisateur

Santa Fe

Santa Fe Advance 90 Instructions d'installation

Santa Fe

Santa Fe Compact 2 Manuel utilisateur

Santa Fe

Santa Fe ADVANCE Series Instructions d'installation

Santa Fe

Santa Fe ULTRA98 Manuel de programmation

Santa Fe

Santa Fe COMPACT70 Instructions d'installation

Santa Fe

Santa Fe ULTRAMD33 Instructions d'installation

Santa Fe

Santa Fe Compact 2 Manuel utilisateur

Santa Fe

Santa Fe ULTRA Series Manuel utilisateur

Santa Fe

Santa Fe ULTRA Series Manuel utilisateur

Manuels Déshumidificateur populaires d'autres marques

Daitsu

Daitsu CD031IU-DFA Manuel utilisateur

Fehom

Fehom PDGT701BE Manuel utilisateur

Hitachi

Hitachi RD-190GX Manuel utilisateur

Westpoint

Westpoint MDF1-30AE Manuel utilisateur

SOLIS

SOLIS easy dry compact Manuel utilisateur

ENVIROBOSS

ENVIROBOSS EB240 Manuel utilisateur

Sinclair

Sinclair R-9112 Manuel utilisateur

Kenmore

Kenmore 580.54701 Manuel utilisateur

Demargo

Demargo DM828NF Manuel utilisateur

Altrad Lescha

Altrad Lescha LDH 600 Manuel utilisateur

BOMANN

BOMANN LE 1150 CB Manuel utilisateur

SPT

SPT SD-46 Manuel utilisateur

REMKO

REMKO SLN 40 Manuel utilisateur

Haier

Haier HD458 Manuel utilisateur

Logik

Logik L20DHW12 Manuel utilisateur

Frigidaire

Frigidaire FDR30S1 - 30 Pint Capacity Dehumidifier Guide de démarrage rapide

Blitz

Blitz HHD Series Manuel utilisateur

Prem-I-Air

Prem-I-Air PD14DEN Manuel utilisateur