Sankey CLCD-2630 Manuel utilisateur
Service Manual
26” LCD TV
Model: CLCD-2630
English Version
-1-
INDEX
1 Cautions…………………………………………….…………………2
2 Product specification………………….…………………………..……..3
3 Illustration of the interface panel………….…………..………………4
4 Illustration of the remote control……………….……….………………6
5 Alignment…………………………………………………………………8
6 Technical Information……………………...………….………...….....…9
7 Troubleshooting……………………………………….………...…...…24
-2-
【Warning】
To reduce the risk of fire or electric shock, do not expose this equipment to rain or moisture.
This symbol is intended to alert the user to avoid the risk of electric shock, do
disassemble this equipment by anyone except a qualified service personnel.
This symbol is intended to alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the appliance.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified here in
may result in hazardous radiation exposure
1- Cautions
- 3 -
2- Product specification
ITEMS SPECIFICATION
Panel
Panel Type
Display Area
Display Color
View angle
Resolution
26” TFT LCD
575.769 × 323.712
16.7 million
176°(H) / 176°(V)
MAX resolution 1366×768
PC Analog RGB 15 pin D-sub
Video S-video Input
Video Input
HDTV (Y, Pb, Pr) Input
HDMI Input
In/Out
Audio Composite Input
PC Input
Earphone Output
HDTV Input
TV
Antenna
Color System
Receiving System
75ΩCoaxial cable
M, M/N
NTSC/PAL-M/N
Others
Certifications
Power waste
Speaker
Plug & Play
Screen Control
Power supply
Remote Controller
Weight
Dimension
CE
＜140W
8W×2
DDC 1/2 B
On Screen Display Menu
AC 100-240V~
Yes
N.W: 11.3Kg G.W: 13.4Kg
780 (W) × 290 (H) × 595 (D)
- 4 -
3- Illustration of the interface panel
(1) Illustration of control board
ITEM DESCRIPTION
1 IR & LED Infrared Receiver. (IR)
The LED light indicates when the LCD TV is activated.
2 Power Switch AC power on/off.
3 VOL+ Adjusts the volume up.
4 VOL- Adjusts the volume down.
5 CH∧Scans up through channels.
Selects sub-menu items on the OSD mode.
6 CH∨Scans down through channels.
Selects sub-menu items on the OSD mode.
7 MENU Displays the OSD menu (on screen display).
8 SOURCE Chooses from different input signal sources.
9 POWER Turns the LCD TV on and off.
①
②
V
OL
+
-
∧
∨
CH
③
④
⑤
⑥
⑦
⑨
⑧
- 5 -
(2) Illustration of the interface panel
ITEM DESCRIPTION
1 AC IN Connects the AC power cord. (100~240V AC, 50/60Hz)
2 Earphone Out Earphone out interface.
3 YCbCr/YPbPr
Audio (L/R) Audio in (L/R) jacks of your DVD player, HDTV, or video equipment.
4 RF(75Ω) The RF input that connects to your VHF/UHF antenna or cable.
5 YCbCr/YPbPr Component (Y, Cb/Pb, Cr/Pr) video jacks.
6 AV Out Used to connect a video signal from a VTR or DVD
7 AV Composite video input jacks.
8 S-Video S-Video signal from an VCR or laserdisc player
9 PC Audio Connects to the sound-output port of a personal computer
10 VGA Used to connect a video signal from a personal computer
11 HDMI Connects to a digital set-top box or other deceives with a HDMI interface.
⑽
⑼
⑴⑶⑹
⑸
⑷
⑵⑻⑺⑾
- 6 -
Installing the batteries in your remote control
1. Pull the tab of the back cover and pull up on the cover to
open the battery compartment.
2. Insert two AAA size batteries. Make sure to match the
(+) and (-) ends of the batteries with the (+) and (-) ends
indicated in the battery compartment.
3. Align the lower tabs of the back cover to the remote
control and snap the cover into place.
4- Illustration of the remote control
If the remote controller is not used for a long time,
please take the batteries out to avoid damages caused
by the leaking liquid.
Please use the remote controller carefully. Do not drop
the remote controller on the ground. Keep the remote
controller away from moisture, sunshine, and high
temperature.
- 7 -
Illustration of the keys on the remote control:
1. POWER Turns the LCD TV on and into standby mode.
2. MUTE Mutes and restores your LCD TV sound.
3. 0~9 TV channel number select
4. -/-- One bit, two bit or three bit TV channel select
5. Switches back and forth between the current and previous channels.
6. VOL+ Volume up
7. VOL－Volume down
8. CH+ TV channel up
9. CH－TV channel down
10. ZOOM Zoom the picture: 16:9, 16:9 Zoom, 16:9 USB, 14:9, Original
11. SYSTEM TV System select
12. DISPLAY Display current TV channel or cancel
13. ◄Left orientation
14. ►Right orientation
15. ▲Up orientation
16. ▼Down orientation
17. ENTER Select and set up the OSD options.
18. EXIT Exits the OSD menu (on screen display).
19. MENU Displays the OSD menu (on screen display)
20. AV/TV TV/ Video/ S-VIDEO/ YPbPr/ VGA/ HDMI mode Select
21. PMODE Selects picture mode: User/ Dynamic/ Standard/ Mild.
22. SMODE Selects sound mode: User/ Standard/ Cinema/ Music/ News.
23. SLEEP Sets the LCD TV sleep time.
- 8 -
FACTORY
1. This mode uses the special remote control. Turn on the LCD TV. Press SMODE until
“Theater” display on the screen. Press SLEEP until “120min” display on the screen. Press the
green button.
2. The factory mode will be displayed.
3. Access the adjustment mode by pressing the ◄/►button. The adjustment parameters
adjusted are listed in the accompanying table, and they are selected by pressing the ▲/▼
button.
4. Press ◄/►button to select the selection, adjust item value, or enter sub menu.
5- ALIGNMENT
- 9 -
6- TECHNICAL INFORMATION
Table des matières
