Sanctuary SA-PS1D Manuel utilisateur
IMPORTANT:
Please read this information and follow all safety rules carefully before
operating your safe. Failure to do so will void your warranty.
092321
HOME & OFFICE FIRE SAFES INSTRUCTION MANUAL
HOME & OFFICE FIRE SAFE
THIS MANUAL SERVICES THE FOLLOWING STYLE NUMBERS
TABLE OF CONTENTS
SA-PS1D
www.saproducts.com 1
IMPORTANT INFORMATION ............................................................................................... 2
1. REGISTRATION ................................................................................................................ 3
2. UNDERSTANDING YOUR SAFE ...................................................................................... 4
3. UNBOXING ...................................................................................................................... 4
4. INSPECTION .................................................................................................................... 4
5. OPENING YOUR SAFE ................................................................................................... 5
6. E-LOCK BATTERY INSTALLATION ..................................................................................... 6
7. E-LOCK SECURITY CODE SET UP ....................................................................................... 6
8. UNLOCKING YOUR SAFE .................................................................................................. 7
9 LOW BATTERY WARNING ................................................................................................8
10. E-LOCK QUIET MODE ..................................................................................................... 8
11. LOCKED OUT OF YOUR SAFE ....................................................................................... 8
12. PROPER PLACEMENT AND MOVING OF SAFE .............................................................. 9
13. SECURING YOUR SAFE ................................................................................................ 10
14. LOADING YOUR SAFE ............................................................................................... 11
15. KEEPING YOUR SAFE DRY ......................................................................................... 11
16. MAINTAINING HINGES AND INTERNAL MECHANISMS .............................................. 11
2
DISCLAIMER - READ BEFORE SAFE SETUP
WEAPON STORAGE
SAFETY
Thank you for choosing a Sanctuary safe to protect your valuables. We are commit-
ted to securing, organizing and protecng your most important documents,
valuables and keepsakes.
If you experience problems or challenges with your safe, please contact us.
Many issues can be quickly resolved without the product being returned.
Be sure to keep backup keys stored in a safe place away from unauthorized users
If you choose to ulize this safe to store a firearm always follow proper firearm and
local laws when storing a firearm.
SA Consumer Products strongly recommends that you do not store loaded firearms.
Always follow the firearm safety rules set out by the firearm’s manufacturer.
A Sanctuary safe or any other firearm storage device cannot take the place
of other safety procedures including advising children of the dangers of firearms.
SA Consumer Products and its distributors of the Sanctuary safes do not
recommend, suggest, advise, promote, or otherwise condone the ownership
or use of firearms. We believe the decision to own or use a firearm is a serious
decision that should only be made by an adult who has carefully considered
the risks and benefits of such a decision.
PLEASE READ THIS INFORMATION CAREFULLY BEFORE OPERATING YOUR
SANCTUARY SAFE.
DO NOT LOCK THIS MANUAL OR THE BACKUP KEYS IN YOUR SAFE.
3
www.saproducts.com
REGISTRATION INFORMATION
PURCHASE DATE:
PURCHASE PRICE (BEFORE TAX):
MODEL NUMBER:
SERIAL NUMBER:
KEY NUMBER (IF APPLICABLE):
1. REGISTRATION
RETAILER NAME:
Please ensure you register your safe by vising our website. Locate the
“contact” buon on the top header on the home page. Select registraon
from the drop down menu.
By registering your Sanctuary safe we will be able to expedite and address
any problems or challenges you may have which would otherwise require a
notary leer and proof of payment.
The informaon you record onto this page will be required in the event you
cannot access the contents of your Sanctuary safe. Please fill out all the required
informaon below and retain for your records and safe keeping.
PLEASE HAVE THIS INFORMATION READY PRIOR TO CALLING FOR TECHNICAL
ASSISTANCE AT:
SA-PS1D
Knob
Locking
Bolts
Reset
Button
2. UNDERSTANDING YOUR SAFE
Override Entry
(Underneath
Key Cover)
Electronic
Keypad
4. INSPECTION
3. UNBOXING
Make sure to inspect your safe for shipping damage before accepng delivery.
If you find any damage, please contact the delivery company (or carrier) immediately.
Any damage not noted upon delivery must be reported within fieen (15) days
or there will be no recourse. Any noted damage at the me of delivery must be
resolved with the delivery company and/or retailer. Shipping damage is not
warrantable by SA Consumer Products.
WARNING: SAFES ARE HEAVY AND CAN BE UNSTABLE ON UNEVEN SURFACES.
PLEASE ENSURE EXTRA CAUTION WHEN DEALING WITH OR MOVING UNSECURED
SAFES.
Remove the packaging. Carefully remove the box, ensuring not to damage the
safe and/or injure yourself.
4
Top Shelf Battery
Compartment
Mounting
Holes
1.
3.
Step 1
Step 2
Step 3
2.
LOCK UNDER
KEY COVER
Turn the key clockwise from
12 to 3 o’clock to unlock
your safe.
Locate the override key
aached to the product
packaging. Remove the
backup key cover carefully
by placing a flat end screw
driver into the slot and pry
it upwards.
5. OPENING YOUR SAFE
5
Turn the knob on the door
clockwise to grant access to
your safe.
Warning: Do not store
your back-up keys inside
of the safe.
6. E-LOCK BATTERY INSTALLATION
Step 1
1.
WARNING: The baeries must be inserted with the correct polarity. Exhausted
baeries must be removed from the product and discarded safely. Do not mix old
and new baeries. Do not mix alkaline or standard (carbon – zinc)baeries.
Do not use rechargeable (nickel –
cadmium)baeries.
Important: It is necessary to re-program your safe with a new security code you
have personally selected to provide maximum household security. Be careful,
in choosing your new security code, you’ll want to be sure that you can operate
the unit quickly without making an error.
7. E-LOCK SECURITY CODE SETUP
Step 1
1.
2.
6
Locate the baery compartment
on the top of the door panel.
Insert the baeries in the proper
orientaon and order. Keypad
will beep when baeries are
successfully installed. Replace
baery cover.
Input your new 3-8 digit code in
3 seconds, each input will result
in 1 beep and 1 green light flash.
Reset
Buon
Step 1
Locate and remove the red cap
covering the reset buon on
the inside of the door panel.
Push the buon to begin the
process of seng your own
unique entry code. There will
be one beep and one green
light flash.
Step 2
1X green light
and 1X beep
++
+ +
-
-
--
8. UNLOCKING YOUR SAFE
3.
1.
2.
3.
7. E-LOCK SECURITY CODE SETUP (continued)
7
Press “LOCK” to confirm. There will be
2 beeps with a flashing green light. It
means the new code was successful.
4. If the red light flashes twice and
beeps, the code failed. Press the
reset buon again and repeat the
code programming sequence.
Press your new code (3-8 digits),
each input results in a green light
flash and one beep.
Step 1
Step 1
Step 1
Step 1
1X green light
and 1X beep
2X green lights
and 2X beeps
3X red lights
and 3X beeps
Unsuccessful,
Try Again:
Successful:
Step 1
Step 2
Step 1
Step 3
2X red lights
and 2X beeps
Unsuccessful,
Try Again:
Step 1 Step 4
If the red light flashes 3 mes with
3 beeps, the operaon has failed.
Please enter your code again.
Step 1
Step 3
2X green lights
and 2X beeps
Successful:
Press “LOCK” to confirm, there will
be 2 beeps and the green light flashes
twice. This means the operaon is
correct. Turn the knob clockwise
to open the door.
Customer Service - (888) 792-4264
11. LOCKED OUT OF YOUR SAFE
In the event you have forgoen the security code your primary acon will be to use
your backup keys in order to gain access to your safe and follow the E-Lock Security
Setup Code instrucons, starng at step 2 of acvang the reset buon.
Note: Factory pass code is “1-5-9-LOCK”
If you have lost your backup keys, you will need to contact customer service at the
number below. Proof of purchase is required to replacement keys.
8. UNLOCKING YOUR SAFE (Continued)
9. LOW BATTERY WARNING
10. E-LOCK QUIET MODE
8
Note: If 3 invalid code aempts are made in succession, this will cause 5 beeps while
the red light flashes 5 mes. The user will be locked out for 60 seconds. You can sll
use your backup key at anyme to open the safe.
If invalid code is entered again, you will hear 5 beeps while the red light flashes 5
mes and the user will be locked out for 5 minutes.
Note: 1. In the factory sengs, the sound has been turned on.
2. During the self-locking, no operaon is available.
By acvang the E-lock quiet mode, the safe will
no longer make audible sounds when interacng
with safe, allowing for silent access.
You can mute/unmute the keypad by entering
the “CLEAR” buon with 1 green light flash.
This E-Lock is equipped to alert you when the baeries are
low by illuminang the yellow light (center) on the keypad
Always test the baeries when installing or replacing. If the
yellow light comes on when a buon is pressed you know
the baeries are not fully charged.
LOW BATTERY
WARNING
WARNING: SAFES ARE VERY HEAVY AND AWKWARD TO HANDLE. PLEASE USE
THE UTMOST CARE IN MOVING THE SAFE. UTILIZING A TRAINED PROFESSIONAL
WITH PROPER MOVING EQUIPMENT IS HIGHLY RECOMMENDED.
1. To maximize burglary protecon and stability, securing the safe to the floor
is recommended.
2.
HELPFUL: TO DETERMINE WHETHER YOUR SAFE WILL MAKE IT THROUGH
DOORWAYS, STAIRS OR CORNERS TAKE THE EMPTY SAFE BOX AND SEE IF IT
WILL FIT ALL THE WAY THROUGH TO ITS FINAL LOCATION.
1. The safe should be installed adjacent to a side wall with minimal space on
either side of the safe. Wherever possible, the safe should be flat against the
wall and floor. Remove the baseboard and/or wall trim if necessary.
2. Always ensure the safe is in an isolated and dry area. Never place the safe in
direct contact with a wet floor. When installing your safe on a concrete floor,
use of a moisture/protecve barrier is highly recommended. Failure to do so,
or exposing the safe to chemicals or other adverse environments, may void
the warranty.
3. If your safe seems unlevel, you may need to shim the boom of the safe to
prevent the door from swinging open too quickly, or closing on itself.
SA Consumer Products recommends that you store your safe in a closet, office,
basement, bedroom or any other locaon that is convenient for you but out of
direct line of sight from prying eyes.
12. PROPER PLACEMENT AND MOVING OF SAFE
9
Table des matières
Autres manuels Sanctuary Sûr
Sanctuary
Sanctuary BIOMETRIC SA-DIA1-BIO Manuel utilisateur
Sanctuary
Sanctuary DIAMOND SA-DIA1-COM Manuel utilisateur
Sanctuary
Sanctuary PLATINUM SA-PLAT1 Manuel utilisateur
Sanctuary
Sanctuary SA-PV2M-BIO Manuel utilisateur
Sanctuary
Sanctuary SA-DIA4 Manuel utilisateur
Sanctuary
Sanctuary SA-PV1M-BIO Manuel utilisateur
Sanctuary
Sanctuary Platinum SA-PLAT1-BIO Manuel utilisateur
Sanctuary
Sanctuary Diamond SA-DIA1 Manuel utilisateur
Sanctuary
Sanctuary SA-PV2M Manuel utilisateur
Manuels Sûr populaires d'autres marques
Honeywell
Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe Manuel utilisateur
Hornady
Hornady SnapSafe Trunk Safe II Manuel utilisateur
SPORTS AFIELD
SPORTS AFIELD SA-HD5-BIO Manuel utilisateur
Honeywell
Honeywell 5912 Manuel utilisateur
Phoenix
Phoenix FS1280F Manuel utilisateur
Phoenix
Phoenix SS0992K Fiche d'information produit
