Samsung WA456 Series Manuel utilisateur

Fast Track Trouble shooting

Model:

Bulletins:

ASC20131127001

Publication # SMWA456 Production Date: 12/17/14

WA456****

QUICK TEST MODE – PRESS: SPIN SOIL

LEVEL POWER Together - 3 Seconds

WITH POWER OFF

SERVICE MODE – PRESS: DELAY START AQUA JET Together - 3 Seconds

WITH POWER ON (& MACHINE IN USE)

All LED’s light up Beep Sound when entered.

Displays software version for a sec and Clear EEprom.

When the version is displayed, turn the Jog-Dial so that

the version disappears.

Press the following keys to test the various components.

Temp Key Water Valve Test

Soil Key Door Lock/Unlock Test

Spin Key Drain Pump Test

QUICK TEST MODE

The washer must be on to go into the Service Mode.

The motor speed will be displayed when started

To exit Service Mode, press Signal + Extra Rinse Keys for

3 second again, or Power Key. If no key is pressed

during service mode after 5 minutes, the machine will

return to normal user mode.

Refer to page 2 for a list of checks available

SERVICE MODE

WARNING!!!

ENTERING QUICK TEST MODE BEFORE ENTERING SERVICE MODE WILL DELETE STORED ERROR CODES

SERVICE MODE

QUICK SPIN TEST - Press the DELAY START + ECO PLUS Level Keys for 3 seconds.

Cannot enter once the washing cycle has started (will not spin with water in tub).

Unit starts spinning and reaches to its maximum RPM then speed drops immediately.

To hold speed press the START PAUSE (will hold for 10 minutes then revert back to QUICK SPIN TEST MODE.

Exit test same way as entered.

CYCLE COUNT CHECK - Press the PRE SOAK Key during Service Mode.

When the SIGNAL key is pressed, the total number of washings will light up and a signal LED will glow.

The maximum number of cycles will be 9999 before recounts. Exit test same way as entered

SOFTWARE VERSION CHECK - Press the SOIL LEVEL key during Service Mode

Example: AE49 (AE is Micom code, 49 is it’s software version). Exit test same way as entered

FAST TIME DOWN - Press the TEMP key during Service Mode

To forward the program to the next cycle stage.

BOARD INPUT TEST - Press the ECO PLUS key during Service Mode

To display specific input data.

Turn the Jog-Dial to NORMAL WASH. Water Temperature will be displayed in Celsius.

Turn the Jog-Dial to PERMANENT PRESS. Water Temperature will be displayed in Fahrenheit.

Turn the Jog-Dial to DELICATES / HAND WASH. The door status will be displayed (OP if open, CL if closed).

Turn the Jog-Dial to QUICK WASH. The Door Lock Switch status will be displayed (UL if unlocked, LO if locked).

Turn the Jog-Dial to PURE CUCLE. The Water Frequency will be displayed.

DIAGNOSTIC CODE CHECK - Press the SPIN key during Service Mode

To display stored diagnostic codes. To cycle through the diagnostic codes (d1,d2,d3~d7), turn the Jog Dial in

one direction (either Clockwise or Counterclockwise). It will then show the diagnostic codes from the latest (d1).

When turning it in the opposite direction, it shows the diagnostic codes in the reverse order.

Autres manuels pour WA456 Series

Table des matières

Autres manuels Samsung Rondelle

Samsung

Samsung SW75V9W Manuel utilisateur

Samsung

Samsung WW4000T Manuel utilisateur

Samsung

Samsung WA5471AB Series Manuel utilisateur

Samsung

Samsung WW70J4 Series Manuel utilisateur

Samsung

Samsung WA11T5260B Series Manuel utilisateur

Samsung

Samsung WA1635D0DW/XAP Manuel utilisateur

Samsung

Samsung WA65F5S2 Manuel utilisateur

Samsung

Samsung WD75K6 Series Manuel utilisateur

Samsung

Samsung WF42H5600A Series Manuel utilisateur

Samsung

Samsung WD8 K64 Series Manuel utilisateur

Samsung

Samsung WF-J1462V Manuel utilisateur

Samsung

Samsung DC68-02154A Manuel utilisateur

Samsung

Samsung WF361 Series Manuel utilisateur

Samsung

Samsung WA95U7 Manuel utilisateur

Samsung

Samsung SW70A1 Manuel utilisateur

Samsung

Samsung WF702Y4BK Series Manuel utilisateur

Samsung

Samsung WF350AN Series Manuel utilisateur

Samsung

Samsung WF1702WQA Manuel utilisateur

Samsung

Samsung WT12S3 Manuel utilisateur

Samsung

Samsung WA10F5S2 Manuel utilisateur

Samsung

Samsung Q1044A Manuel utilisateur

Samsung

Samsung WF7602NAW Instructions d'utilisation

Samsung

Samsung WT14J4200MB/AP Manuel utilisateur

Samsung

Samsung H1245A Manuel utilisateur

Manuels Rondelle populaires d'autres marques

Tricity Bendix

Tricity Bendix AW 1000 W Guide produit

Panasonic

Panasonic NA-F60L5WRB Manuel utilisateur

GE WSLP1500 Manuel

Electrolux

Electrolux EWF1284EDW Manuel utilisateur

Bosch

Bosch WAN2829BSN Manuel utilisateur

LG TV2516DV3B Manuel utilisateur

LG TH2517DSAV Manuel utilisateur

VESTEL

VESTEL CMH-XL 7510 TE Manuel utilisateur

AEG

AEG 74335 Manuel d'utilisation

Johnson

Johnson JWF721A Manuel utilisateur

Beko

Beko WTE7604XLW0 Manuel utilisateur

Danby

Danby DTT100A1WDB Instructions de montage

Amica

Amica WA 14 Ex Manuel utilisateur

Daewoo

Daewoo DWD-F1222 Manuel utilisateur

Bosch

Bosch WAS28461AU Manuel utilisateur

Miele

Miele PW 6080 Vario Manuel utilisateur

Finlux

Finlux FLX108CF220 Manuel utilisateur

Whirlpool

Whirlpool 3LBR5132AN0 Manuel utilisateur