Samsung Data Migration v2.0 Manuel de référence

2013. 3 (Rev 2.0.)

Samsung Data Migration v2.0

Introduction and Installation Guide

2013. 3 (Rev 2.0.)

Legal Disclaimer

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS,

INFORMATION AND SPECIFICATIONS WITHOUT NOTICE.

Products and specifications discussed herein are for reference purposes

only. All information discussed herein is provided on an “AS IS” basis,

without warranties of any kind. This document and all information

discussed herein remain the sole and exclusive property of Samsung

Electronics. No license of any patent, copyright, mask work, trademark or

any other intellectual property right is granted by one party to the other

party under this document, by implication, estoppels or otherwise.

Samsung products are not intended for use in life support, critical care,

medical, safety equipment, or similar applications where product failure

could result in loss of life or personal or physical harm, or any military or

defense application, or any governmental procurement to which special

terms or provisions may apply. For updates or additional information

about Samsung products, contact your nearest Samsung office.

This material is copyrighted by Samsung Electronics. Any unauthorized

reproductions, use or disclosure of this material, or any part thereof, is

strictly prohibited and is a violation under copyright law.

Trademarks & Service Marks

The Samsung Logo is the trademark of Samsung Electronics. Adobe is a

trademark and Adobe Acrobat is a registered trademark of Adobe

Systems Incorporated. All other company and product names may be

trademarks of the respective companies with which they are associated.

2013. 3 (Rev 2.0.)

Introduction

The Samsung Data Migration software is designed to help users quickly,

easily, and safely migrate all of their data – including their current

operating system, application software, and user data – from their

existing storage device (e.g. HDD) to their new Samsung SSD.

Samsung Data Migration software is developed and distributed exclusively

for owners of Samsung Solid State Drives (SSDs).

Precautions

1. When cloning the content of the source drive (e.g. HDD), all data on the

Target Disk (Samsung SSD) will be deleted and is impossible to recover.

Therefore, if you have stored any data that you would like to keep on

the Target Disk, please back it up in advance.

2. Samsung Electronics assumes no responsibility for any loss of data

that may occur on the Target Disk in the course of using this software

and will not be held liable for data recovery services. Even if the

migration process fails, data contained on the Source Disk is not

affected.

Improvements

Samsung Data Migration v2.0 supports advanced cloning that

automatically clones your PC data onto your new Samsung SSD,

regardless of how large the data size is.

2013. 3 (Rev 2.0.)

System Requirements

Component

Requirement

Operating System

Windows XP SP2 (32-bit)

Windows Vista (32/64-bit)

Windows 7 (32/64-bit)

Windows 8 (32/64-bit)

PC Memory (RAM)

1 GB or more

Disk Space

Minimum 10 MB required for installation

Supported Partition Types

MBR, GPT

Supported Languages

English

Source Disk

The Source Disk (HDD or SSD) must contain the

operating system installation

Target Disk

The Target Disk must be one of the following:

Samsung SSD 840 Series

Samsung SSD 840 PRO Series

Samsung SSD 830 Series

Samsung SSD 470 Series

2013. 3 (Rev 2.0.)

Limitations

1. This software only supports the Windows operating systems listed in the

User Manual.

2. This software only supports the Samsung SSDs listed in the User Manual.

OEM storage devices provided through a computer manufacturer or

supplied through another channel are not supported.

3. This software will run only if the operating system is installed on the Source

Disk. It will not function on disks that lack an operating system installation.

4. If the amount of data stored on the Source Disk exceeds the capacity of the

Target Disk, cloning will not proceed. The Source Disk (e.g. “C:” drive) must

consist of at least 20% free space. If more than 80% of the Source Disk is

filled with data, the cloning process cannot proceed normally. Secondary

partitions require at least 5 GB of free space.

5. On systems with two (2) drives or more (e.g. “C:”, “D:”, and “E:” drives) with the

operating system installed on the “C:” drive, only the first two drives will be

cloned. The “System” partition that is created during Windows installation is

automatically replicated.

6. OEM recovery partitions, generated at the factory by computer

manufacturers, cannot be replicated.

7. A difference of a few GB of data capacity between the Source and Target

Disks is normal after cloning. The software does not copy the files Windows

automatically generates to manage virtual memory (page files and

hibernation files).

8. This software cannot clone encrypted disks. In order to clone an encrypted

disk, you must first remove the password from the disk.

9. If the mainboard chipset drivers are not up to date when cloning, this

software may not function properly.

10. If there are multiple operating systems installed on the PC (e.g. Windows 7

is installed on the C drive and Windows 8 is installed on the D drive), the

cloned disk may not function properly.

2013. 3 (Rev 2.0.)

11. If the Source Disk is damaged (e.g. the disk has bad sectors), the cloned disk

may not function properly.

12. When attempting to clone a disk using this software, it is recommended that

you close all other programs and free up sufficient memory before cloning.

13. If you have instant PC recovery software installed on your system, this

software may not function properly.

14. If a Source Disk is converted into a dynamic disk, the software may not

function properly.

15. The files in the user's Library folder are listed by default on the screen for

selecting files to exclude during cloning.

16. To exclude files that are not in the Library folder, you can search for them

by scanning folders. Program Files, Windows files, and Recycle Bin files are

not scanned.

2013. 3 (Rev 2.0.)

www.samsung.com/ssd, www.samsung.com/samsungssd

All brand and product names are trademarks of their respective companies.

Design and contents of this manual are subject to change without notice.

Table des matières

Autres manuels Samsung Logiciel

Samsung

Samsung ML 2851ND - B/W Laser Printer Manuel utilisateur

Samsung

Samsung SC MX10 - Camcorder - 680 KP Manuel utilisateur

Samsung

Samsung HXSU025BA - S1 Mini - Hard Drive Manuel utilisateur

Samsung

Samsung Lazett Combo SCX-4116 Manuel utilisateur

Samsung

Samsung iPOLiS Manuel utilisateur

Samsung

Samsung ML-1610 - B/W Laser Printer Manuel utilisateur

Samsung

Samsung UN50EH5300F Manuel utilisateur

Samsung

Samsung EASYGSM GH68-60751A Manuel utilisateur

Samsung

Samsung HXDU010EB - Story Station 1 TB External Hard... Manuel utilisateur

Samsung

Samsung Universal Print Driver 2 Manuel utilisateur

Samsung

Samsung HXSU025BA - S1 Mini - Hard Drive Manuel utilisateur

Samsung

Samsung ML 2510 - B/W Laser Printer Manuel utilisateur

Samsung

Samsung HXSU025BA - S1 Mini - Hard Drive Manuel utilisateur

Samsung

Samsung S1A0905-S0B0 Manuel utilisateur

Samsung

Samsung 3561ND - B/W Laser Printer Manuel utilisateur

Samsung

Samsung SCX 4725FN - B/W Laser - All-in-One Manuel utilisateur

Samsung

Samsung ML-2550 Manuel utilisateur

Samsung

Samsung SCX-4720F Manuel utilisateur

Samsung

Samsung ML 1630 - B/W Laser Printer Manuel utilisateur

Samsung

Samsung SF-555P Manuel utilisateur

Samsung

Samsung MZ-7PC128N Manuel utilisateur

Samsung

Samsung SMX-C20BN Manuel utilisateur

Samsung

Samsung SF-5100P Manuel utilisateur

Samsung

Samsung 4116 - SCX B/W Laser Note de version

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur

Novell

Novell SP2 - S Mode d’emploi