Samsung Data Migration 1.0 Manuel de référence

2012.10 (Rev 1.0.)

Samsung Data Migration v1.0

Introduction and Installation Guide

2012.10 (Rev 1.0.)

Legal Disclaimer

SAMSUNG ELECTRONICS RESERVES THE RIGHT TO CHANGE PRODUCTS,

INFORMATION AND SPECIFICATIONS WITHOUT NOTICE.

Products and specifications discussed herein are for reference purposes

only. All information discussed herein is provided on an “AS IS” basis,

without warranties of any kind. This document and all information

discussed herein remain the sole and exclusive property of Samsung

Electronics. No license of any patent, copyright, mask work, trademark or

any other intellectual property right is granted by one party to the other

party under this document, by implication, estoppels or otherwise.

Samsung products are not intended for use in life support, critical care,

medical, safety equipment, or similar applications where product failure

could result in loss of life or personal or physical harm, or any military or

defense application, or any governmental procurement to which special

terms or provisions may apply. For updates or additional information

about Samsung products, contact your nearest Samsung office.

This material is copyrighted by Samsung Electronics. Any unauthorized

reproductions, use or disclosure of this material, or any part thereof, is

strictly prohibited and is a violation under copyright law.

Trademarks & Service Marks

The Samsung Logo is the trademark of Samsung Electronics. Adobe is a

trademark and Adobe Acrobat is a registered trademark of Adobe

Systems Incorporated. All other company and product names may be

trademarks of the respective companies with which they are associated.

2012.10 (Rev 1.0.)

Introduction

The Samsung Data Migration software is designed to help users quickly,

easily, and safely migrate all of their data – including their current

operating system, application software, and user data – from their

existing storage device (e.g. HDD) to their new Samsung SSD.

Samsung Data Migration software is developed and distributed exclusively

for owners of Samsung Solid State Drives (SSDs).

Precautions

1. When cloning the content of the source drive (e.g. HDD), all data on the

target disk (Samsung SSD) will be deleted and is impossible to recover.

Therefore, if you have stored any data that you would like to keep on

the target disk, please back it up in advance.

2. Samsung Electronics assumes no responsibility for any loss of data

that may occur on the target disk in the course of using this software

and will not be held liable for data recovery services. Even if the

migration process fails, data contained on the original disk is not

affected.

2012.10 (Rev 1.0.)

System Requirements

Component

Requirement

Operating System

Windows XP SP2 (32-bit)

Windows Vista (32/64-bit)

Windows 7 (32/64-bit)

Windows 8 (32/64-bit)

PC Memory (RAM)

1 GB or more

Disk Space

Minimum 10 MB required for installation

Supported Partition Types

MBR, GPT

Supported Languages

English

Source Disk

The source disk (HDD or SSD) must contain the

operating system installation

Target Disk

The Target Disk must be one of the following:

Samsung SSD 840 Series

Samsung SSD 840 PRO Series

Samsung SSD 830 Series

Samsung SSD 470 Series

2012.10 (Rev 1.0.)

Limitations

1. This software supports only the Windows operating systems listed above.

2. Only the Samsung SSDs listed above are supported by this software. OEM

storage devices provided through a computer manufacturer or supplied

through another channel are not supported.

3. This software will run only if the operating system is installed on the source

disk. It will not function on disks that lack an operating system installation.

4. If the amount of data stored on the source disk exceeds the capacity of the

target disk, cloning will not proceed. The source disk (e.g. “C:” drive) must

consist of at least 20% free space. If more than 80% of the source disk is

filled with data, the cloning process cannot proceed normally. Secondary

partitions require at least 5 GB of free space.

5. On systems with three (3) drives or more (e.g. “C:”, “D:”, and “E:” drives) with

the operating system installed on the “C:” drive, only the first two

consecutive drives will be cloned (“C:” and “D:” drives). The “System” partition

that is created during Windows installation is automatically replicated.

6. OEM recovery partitions, generated at the factory by computer

manufacturers, cannot be replicated.

7. A difference of a few GB of data capacity between the source and target

disks is normal after cloning. The software does not copy the files Windows

automatically generates to manage virtual memory (page file, hibernation file,

etc.).

8. This software cannot clone encrypted disks. In order to clone an encrypted

disk, you must first remove the password from the disk.

9. If you have instant PC recovery software installed on your system, this

software may not function properly.

2012.10 (Rev 1.0.)

www.samsung.com/ssd, www.samsung.com/samsungssd

All brand and product names are trademarks of their respective companies.

Design and contents of this manual are subject to change without notice.

Autres manuels pour Data Migration 1.0

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Samsung Logiciel

Samsung

Samsung SCX 6322DN - B/W Laser - All-in-One Manuel utilisateur

Samsung

Samsung MZ-7PC128N Manuel utilisateur

Samsung

Samsung SCX 4500W - Personal Wireless Laser Multi-Function... Manuel utilisateur

Samsung

Samsung HXSU025BA - S1 Mini - Hard Drive Manuel utilisateur

Samsung

Samsung SCX 4500 - B/W Laser - All-in-One Manuel utilisateur

Samsung

Samsung HMX-S10BN Manuel utilisateur

Samsung

Samsung HXDU010EB - Story Station 1 TB External Hard... Manuel utilisateur

Samsung

Samsung HXSU025BA - S1 Mini - Hard Drive Manuel utilisateur

Samsung

Samsung CLX 3160FN - Color Laser - All-in-One Manuel utilisateur

Samsung

Samsung ML 2851ND - B/W Laser Printer Manuel utilisateur

Samsung

Samsung UN50EH5300F Manuel utilisateur

Samsung

Samsung ANYCAM SNC-35E Manuel utilisateur

Samsung

Samsung CLX 6210FX - Color Laser - All-in-One Manuel

Samsung

Samsung SCX-4720F Manuel utilisateur

Samsung

Samsung SCX 4826FN - Laser Multi-Function Printer Manuel utilisateur

Samsung

Samsung SC-X300L Manuel utilisateur

Samsung

Samsung SCX 4828FN - Laser Multi-Function Printer Manuel utilisateur

Samsung

Samsung SCX-6545N Series Manuel utilisateur

Samsung

Samsung CLX3175FN - COL LASERPR MLTFUNC 4/17PPM... Manuel utilisateur

Samsung

Samsung UN32EH5300F Manuel utilisateur

Samsung

Samsung ML 2510 - B/W Laser Printer Manuel utilisateur

Samsung

Samsung SCX 5530FN - Multifunction... Manuel utilisateur

Samsung

Samsung MFP SCX-6345N Manuel utilisateur

Samsung

Samsung HXDU010EB - Story Station 1 TB External Hard... Guide de démarrage rapide

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur

Novell

Novell SP2 - S Mode d’emploi