Samsung IPX-S300B Guide de l'utilisateur
Ver.
2600-00IL7PGA2
3.0
SCM Compact (IPX-S300B)
System Description
COPYRIGHT
This manual is proprietary to SAMSUNG Electronics Co., Ltd. and is protected by copyright.
No information contained herein may be copied, translated, transcribed or duplicated for any commercial
purposes or disclosed to the third party in any form without the prior written consent of SAMSUNG Electronics
Co., Ltd.
TRADEMARKS
Product names mentioned in this manual may be trademarks and/or registered trademarks of their respective
companies.
This manual should be read and used as a guideline for properly installing and operating the product.
All reasonable care has been made to ensure that this document is accurate. If you have any comments on
this manual, please contact our documentation centre at the following homepage:
Homepage: http://www.samsungdocs.com
©2015~2016 SAMSUNG Electronics Co., Ltd. All rights reserved.
Ошибка! Используйте вкладку "Главная" для применения 제목 8 к тексту, который должен здесь отображаться.
© SAMSUNG Electronics Co., Ltd. page 3 of 162
General User Information
Radio Frequency Interference
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to FCC Part 15 Rules.
These limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in
which case the user will be required to correct the interference at his/her own risk.
FCC Requirements
The IPX-S300B (SCM Compact) equipment complies with FCC Part 68 Rules and
requirements adopted by Administrative Council for Terminal Attachment (ACTA).
The FCC Part 68 label is located on the bottom of the chassis. The label contains:
Product Identifier Number
FCC Registration Number
Ringer Equivalence Number (REN)
Telephone Company Interfaces
A plug and jack is used to connect this equipment to the premises wiring and telephone
network must comply with the FCC Part 68 rules and requirements adopted by theACTA.
A compliant telephone cord and modular plug is provided with this product which is
designed to connect to a compatible Standard Modular jack.
Connection to the telephone network should be made by using standard modular telephone
jacks, type RJ-11C. The RJ-11C plug and/or jacks used must comply with the FCC Part 68
rules.
Unauthorized Modifications
Any change or modifications performed on this equipment that are not expressly approved
in writing by SAMSUNG ELECTRONICS, CO., LTD. could cause non-compliance with
the FCC rules and void the user’s authority to operate the equipment.
Ошибка! Используйте вкладку "Главная" для применения 제목 8 к тексту, который должен здесь отображаться.
© SAMSUNG Electronics Co., Ltd. page 4 of 162
Ringer Equivalence Number
The REN is used to determine the number of devices to be connected to a telephone line.
If the total allowable REN load is exceeded, the phone circuit may fail to ring. In most
cases, the total REN for a telephone line should not exceed Five (5).
Contact Local Telephone Company, to be certain about the number of devices connected to
a line, which is determined by the total REN.
For earlier products, the REN is separately shown on the label.
Incidence of Harm
The telephone company will notify you in advance about the temporary discontinuation of
service, if this equipment is causing harm to the telephone network.
In case advance notification is not feasible, the telephone company will notify the customer
as soon as possible and you will also be advised about your right to file a complaint with
the FCC, if it is necessary.
Changes to Telephone Company Equipment or Facilities
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment.
If this happens, the telephone company will provide advance notice in order for you to
make necessary modifications to maintain uninterrupted service.
Service Center
If you need assistance during troubleshooting, please contact out local office SAMSUNG
ELECTRONICS, CO., LTD. for repair or warranty information.
If the trouble is causing harm to the telephone network, the telephone company may
request you to remove the equipment from the network until the problem is resolved.
Field Repairs
Only technicians certified on the Ubigate iBG2016 are authorized by SAMSUNG
ELECTRONICS, CO., LTD. to perform system repairs.
Certified technicians may replace modular parts of a system to repair or diagnose trouble.
Defective modular parts can be returned to SAMSUNG ELECTRONICS, CO., LTD. for
repair.
General
Connection to party line service is subject to state tariffs. Contact the State Public Utility
Commission, Public Service Commission or Corporation Commission for information.
Ошибка! Используйте вкладку "Главная" для применения 제목 8 к тексту, который должен здесь отображаться.
© SAMSUNG Electronics Co., Ltd. page 5 of 162
Equal Access Requirements
Through the use of access codes, this equipment is capable of providing user’s access to
interstate providers of operator services. Modification of this equipment by call aggregators
to block access dialing codes is a violation of the Telephone Operator Consumers Act of
1990.
Electrical Safety Advisory
Parties responsible for equipment requiring AC power should consider including an
advisory notice in their customer information suggesting them to use a surge arrestor.
Telephone companies report that electrical surges, typically lightning transients, are very
destructive to customer terminal equipment connected to AC power sources. This has been
identified as a major nationwide problem.
Music on Hold Warning
In accordance with US copyright laws, a license may be required from the
American Society of Composers, Authors and Publishers (ASCAP) or other
similar organizations if copyright music is transmitted through the Music on Hold
feature
SAMSUNG ELECTRONICS, CO., LTD. hereby disclaims any liability arising out
of failure to obtain such a license.
DISA Warnings
The lines used for the DISA feature must have the disconnected Supervision option
provided by the telephone company.
As it is impossible to control who may access your DISA line it is suggested that
you do not turn this feature on unless you intend to use it. If you do use this
feature, it is good practice to frequently change pass codes and periodically
review your telephone records for unauthorized use.
Safety Warnings
High touch current earth connection is essential before making
telecommunication network connection.
Energy Hazard-careful treatment is needed.
Ошибка! Используйте вкладку "Главная" для применения 제목 8 к тексту, который должен здесь отображаться.
© SAMSUNG Electronics Co., Ltd. page 6 of 162
Every wire for communication should be larger than 26 AWG.
Double pole/neutral fusing.
Underwriters Laboratories
The IPX-S300B has been tested to comply with Safety Standards in the United States and
Canada. This system is listed with Underwriters Laboratories. The cUL Mark is separately
shown on the label.
Installation Safety Guidelines and Warnings
Safety Recommendations
The Safety Warnings that appear in this document (such as the one below) indicate a
procedure that can harm you if not done correctly.
Electric hazard exists. Verify the power is turned off. Do not work on energized
equipment. Working on energized equipment can result in serious electrical
shock.
To avoid electric shock, do not connect Safety Extra-Low Voltage (SELV) circuits
(found in LAN ports) to Telephone-Network Voltage (TNV) circuits (found in WAN
ports).
This equipment must be installed and maintained by properly trained service
personnel. Make sure the proper electrical service is available before plugging the
unit and turning it on. Disconnect the telecommunication lines before unplugging
the main power connector.
Cover Panels
Do not operate the IPX-S300B with missing blank faceplates and cover panels.
These covers prevent exposure to hazardous voltages and currents inside the chassis.
They are important to maintaining proper air flow through the chassis. They also prevent
electromagnetic interference (EMI) that might disrupt other equipment.
Laser radiation and EMI are present when the router cover panel is open.
Ошибка! Используйте вкладку "Главная" для применения 제목 8 к тексту, который должен здесь отображаться.
© SAMSUNG Electronics Co., Ltd. page 7 of 162
Electrostatic Discharge (ESD) Warning
Observe the following guidelines to minimize the potential for Electrostatic Discharge
(ESD) damage, which can cause intermittent or complete component failures.
When handling IPX-S300B or its components, wear grounding wrist straps to
avoid ESD damage to the equipment. Do not directly touch the backplane with
your hand or any metal tool, or you could shock yourself.
Always use an ESD wrist strap or ankle strap, and verify that it is in direct contact with
your skin.Avoid contact between the component and your clothing as it causes ESD
damage.
When handling any component that is removed from the chassis, verify that the equipment
end of your ESD strap is attached to one of the ESD points on the chassis.
Use care when installing or uninstalling modules or interface cards. Tighten the captive
installation screws to ensure a proper connection when inserting modules or interface cards.
When removing or installing a component, always place it component-side up on an
antistatic surface, in an antistatic card rack. If you are returning a component, place it in an
electrostatic bag before packing it.
Ошибка! Используйте вкладку "Главная" для применения 제목 8 к тексту, который должен здесь отображаться.
© SAMSUNG Electronics Co., Ltd. page 8 of 162
INTRODUCTION
Purpose
This document describes the basic overview and features of the SCM Compact system.
The product model name of the SCM Compact system is the IPX-S300B.
Document Content and Organization
This manual consists of the following parts.
CHAPTER 1. IPX-S300B System Overview
This part describes the IPX-S300B network interface and the operation environments and
capacity of the IPX-S300B.
CHAPTER 2. IPX-S300B Hardware
This part describes the characteristics of the system hardware.
CHAPTER 3. IP Phones
This part describes the characteristics of the IPTelephone served by IPX-S300B.
CHAPTER 4. System Features
This part describes the characteristics of the IPX-S300B features.
CHAPTER 5. User Features
This part describes the characteristics of the User features.
CHAPTER 6. Application Features
This part describes the characteristics of the application features.
CHAPTER 7. Network Features
This part describes the network features of the system.
Ошибка! Используйте вкладку "Главная" для применения 제목 8 к тексту, который должен здесь отображаться.
© SAMSUNG Electronics Co., Ltd. page 9 of 162
CHAPTER 8. SBC Function
This part describes the SBC function of the system.
CHAPTER 9. System Operation
This part describes the operation and management features of the system.
ANNEX A. Supported Specifications and RFC
This part describes the supported specifications and RFC used in the IPX-S300B.
ANNEX B. CDR
This part describes the call log format and CDR format used in the IPX-S300B.
ANNEX C. Open Source Announcement
This part describes the open source announcement.
ABBREVIATION
This part describes the acronyms used in this document.
Ошибка! Используйте вкладку "Главная" для применения 제목 8 к тексту, который должен здесь отображаться.
© SAMSUNG Electronics Co., Ltd. page 10 of 162
Conventions
The following types of paragraphs contain special information that must be carefully read
and thoroughly understood. Such information may or may not be enclosed in a rectangular
box, separating it from the main text, but is always preceded by an icon and/or a bold title.
WARNING
Provides information or instructions that the reader should follow in order to avoid
personal injury or fatality.
CAUTION
Provides information or instructions that the reader should follow in order to avoid
a service failure or damage to the system.
CHECKPOINT
Provides the operator with checkpoints for stable system operation.
NOTE
Indicates additional information as a reference.
Table des matières
Autres manuels Samsung Serveur
Samsung
Samsung SmartServer 3840 Manuel utilisateur
Samsung
Samsung SNT-1010 Manuel utilisateur
Samsung
Samsung MIM-D00 Manuel utilisateur
Samsung
Samsung SBB-SNOWJAU Manuel utilisateur
Samsung
Samsung TC222L Manuel utilisateur
Samsung
Samsung MIM-D00 Manuel utilisateur
Samsung
Samsung OfficeServ 7200 Manuel utilisateur
Samsung
Samsung SNS-100/400 Manuel utilisateur
Samsung
Samsung SMARTSERVER 370 Manuel utilisateur
Samsung
Samsung SPE-400 Manuel utilisateur
