Samsung HP-R4262 Manuel utilisateur

Owner’s Instructions

HP-R4262

HP-R5012

This device is a Class B digital apparatus.

BN68-00835E-00Eng_(001,144) 5/30/05 5:33 PM Page 3

Important Warranty Information

Regarding Television Format Viewing

Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily

designed to view wide screen format full-motion video. The images displayed on them should primarily

be in the wide screen 16:9 ratio format, or expanded to fill the screen if your model offers this feature

and the images are constantly moving. Displaying stationary graphics and images on screen, such as

the dark side-bars on nonexpanded standard format television video and programming, should be

limited to no more than 5% of the total television viewing per week.

Additionally, viewing other stationary images and text such as stock market reports, video game

displays, station logos, web sites or computer graphics and patterns, should be limited as described

above for all televisions. Displaying stationary images that exceed the above guidelines

can cause uneven aging of PDP Displays that leave subtle, but permanent burned-in

ghost images in the PDP picture. To avoid this, vary the programming and images,

and primarily display full screen moving images, not stationary patterns or dark

bars.

On PDP models that offer picture sizing features, use these controls to view different formats as a full

screen picture.

Be careful in the selection and duration of television formats used for viewing. Uneven PDP aging as a

result of format selection and use, as well as burned-in images, are not covered by your Samsung

limited warranty.

BN68-00835E-00Eng_(002~031) 5/30/05 5:11 PM Page 2

User Instructions

Screen Image retention

Do not display a still image (such as on a video game) on the plasma display panel for more than

several minutes as it can cause screen image retention. This image retention is also known as

“screen burn”. To avoid such image retention, refer to page 49 of this manual to reduce the

degree of brightness and contrast of the screen when displaying a still image.

Altitude

The PDP will not operate normally at altitudes above 6500 ft.

Heat on the top of the PDP TV

The top side of the product may be hot after long periods of use as heat dissipates from the panel

through the vent hole in the upper part of the product.

This is normal and does not indicate any defect or operation failure of the product.

However, children should be prevented from touching the upper part of the product.

The product is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the product contracts or expands due to a change of

surrounding environment such as temperature or humidity. This is normal and not a defect of the

unit.

Cell Defects

The PDP uses a panel consisting of 1,230,000(SD-level) to 3,150,000(HD-level) pixels which

require sophisticated technology to produce. However, there may be few bright or dark pixels on

the screen. These pixels will have no impact on the performance of the product.

Avoid operating the TV at temperatures below 5°C(41°F)

A still image displayed too long may cause permanent damage to the PDP Panel.

Watching the PDP TV in 4:3 format for a long period of time may leave

traces of borders displayed on the left, right and center of the screen caused

by the difference of light emission on the screen.

Playing a DVD or a game console may cause similar effect to the screen.

Damages caused by the above effect are not covered by the Warranty.

Afterimage on the Screen.

Displaying still images from Video games and PC for longer than a certain period of time may

produce partial afterimages.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images for a

long time.

Warranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

Installation

Be sure to contact an authorized service center when installing your set in a location with heavy

dust, high or low temperatures, high humidity, and chemical substances, or where it will be

operated for 24 hours continuously such as an airport, train station, etc.

Failure to do so may cause serious damage to your set. 3

BN68-00835E-00Eng_(002~031) 5/30/05 5:11 PM Page 3

Table of Contents

General Information

Your New Plasma Display Panel......................8

Remote Control Buttons ................................11

Wall Installation Instructions..........................13

How to assemble the Stand-Base ..................17

Connections

Connecting VHF and UHF Antennas ..............20

Connecting Cable TV ..................................21

Connecting a VCR ......................................23

Connecting a Camcorder ............................24

Connecting a DVD Player (480i, 480p) ........25

Connecting a DTV Receiver (480p, 720p,

1080i) ......................................................26

Connecting to HDMI (High Definition

Multimedia Interface) (480p, 720p, 1080i) ..27

Connecting a Digital TV Set-Top Box (480p,

720p, 1080i) ............................................28

Connecting a Digital Audio System ..............29

Connecting to an Analog Amplifier ..............30

Operation

Turning the TV On and Off ..........................32

Viewing the Menus and Displays ..................36

Memorizing the Channels ............................37

Adding and Erasing Channels ......................39

Setting Up Your Remote Control ....................42

Viewing an External Signal Source................44

Picture Control

Changing the Picture Standard ....................48

Customizing the Picture Settings ....................49

Viewing the DNIe Demonstration ..................51

Changing the Screen Size ............................52

Viewing the Picture-in-Picture.........................54

Selecting the Sound Source .........................60

Setting the My Color Control Mode ...............61

Sound Control

Customizing the Sound ..............................66

Using Automatic Sound Settings ...................67

Setting the TruSurround XT............................68

Choosing a Multi-Channel Sound (MTS) track

- Digital ......................................................69

Choosing a Multi-Channel Sound (MTS) track

- Analog ....................................................70

Using the Auto Volume ................................71

Choosing a Digital Sound Format..................72

Setting the On/Off Melody ..........................73

Selecting the Internal Mute ..........................74

Channel Control

Selecting the Antenna ..................................76

Selecting Your Favorite Channels ..................77

Labeling the Channels..................................78

Viewing the Channel Lists ............................79

Editing the Channel Lists ..............................80

Fine Tuning Analog Channels ......................81

Checking the Digital-Signal Strength ..............82

LNA (Low Noise Amplifier) ..........................83

BN68-00835E-00Eng_(002~031) 5/30/05 5:11 PM Page 4

Connecting a PC and Operation

Connecting a PC ........................................86

Changing the Position of the Image ..............90

Picture Quality Adjustment............................91

Image Reset ................................................94

Time Setting

Setting the Clock ........................................96

Setting the On/Off Timer..............................98

Setting the Sleep Timer ................................99

Function Description

Selecting a Menu Language ......................102

Digital Noise Reduction..............................103

Selecting the Film Mode ............................104

Setting the Blue Screen ..............................105

Using the Color Weakness Enhancement

Option ....................................................106

Viewing Closed Captions (On-Screen

Text Messages) - Analog ............................107

Viewing Closed Captions (On-Screen

Text Messages) - Digital..............................108

Menu Transparency Level ..........................110

Using the Energy Saving feature ................111

Preventing Screen Burn-in ..........................112

Reducing the Effects of Screen Burn ............113

Setting the Function Help............................114

Using the V-Chip (for USA) ........................115

Using the V-Chip (for Canada) ....................121

Electronic Program Guide ..........................129

Remind List ..............................................133

Appendix

Troubleshooting ........................................136

Care and Maintenance ..............................137

Specifications............................................138

Dimensions (HP-R4262)..............................139

Dimensions (HP-R5012)..............................141

Note

•The information contained in this User’s

Manual is subject to change without prior

notice for improvement, and may vary

depending on the version of the TV’s software

and the regional conditions.

BN68-00835E-00Eng_(002~031) 5/30/05 5:11 PM Page 5

BN68-00835E-00Eng_(002~031) 5/30/05 5:11 PM Page 6

PLASMA DISPLAY PANEL

General Information

Your New Plasma Display Panel ......................................................8

Remote Control Buttons ................................................................11

Wall Installation Instructions ..........................................................13

How to assemble the Stand-Base....................................................17

BN68-00835E-00Eng_(002~031) 5/30/05 5:11 PM Page 7

Your New Plasma Display Panel

Front Panel

ŒSOURCE button

Press to display all of the available video

sources (TV, AV, S-Video, Component1,

Component2, PC, and HDMI).

´MENU button

Displays the main on-screen menu.

ˇVOL +,

buttons

Press to increase or decrease the volume.

Also used to select or adjust items on the

on-screen menu.

¨CH( , ) buttons

Press CH or CH to change channels.

Also used to move up or down in the on-screen

menu.

ˆ(Enter) button

Press to confirm a selection.

ØPower button

Press to turn the TV on and off.

Power indicator

- Power Off : Red

- Power On : Off

∏Remote Control Sensor

Aim the remote control towards this spot on

the TV.

”

Speakers

∏”Ø

BN68-00835E-00Eng_(002~031) 5/30/05 5:11 PM Page 8

Checking Accessories

Power Cord

(3903-000144)

Anynet Cable

(BN39-00518A)

Owner’s Instructions Remote Control (BN59-00462A) /

AAA Batteries

The following parts are sold separately and are available at most electronics stores.

Once you have unpacked your TV, check to make sure that you have all the parts shown here.

If any piece is missing or broken, call your dealer.

Antenna Cable

Component Cables (RCA)

HDMI/DVI cable

S-VIDEO Cable HDMI Cable

PC Cable PC Audio Cable Optical Cable Coaxial Cable

BN68-00835E-00Eng_(002~031) 5/30/05 5:11 PM Page 9

Rear Panel

ŒPOWER IN

Connect the supplied power cord.

´SERVICE ONLY

Connector for service only.

ˇHDMI/DVI IN

Connect to the HDMI jack of a device with

HDMI output.

These inputs can also be used as a DVI

connection with separate analog audio inputs.

An optional HDMI/DVI cable will be

necessary to make this connection.

When using the optional HDMI/DVI adapter,

the DVI analog audio inputs on your TV allow

you to receive left and right audio from your

DVI device. (Not compatible with PC)

¨DVI AUDIO IN (AUDIO-L/R)

Connect to the DVI audio output jack of an

external device.

ˆPC IN

Connect to the video output jack on your PC.

ØPC AUDIO IN

Connect to the audio output jack on your PC.

∏OPTICAL DIGITAL AUDIO OUT

Connect to a Digital Audio component.

”COAXIAL DIGITAL AUDIO OUT

Connect to a Digital Audio component.

’Anynet

Please refer to the Anynet Owner’s

Instruction. This jack is for connecting to

other Samsung Anynet-enabled devices.

˝COMPONENT IN 1, 2

Video (Y/PB/PR) and audio (L-AUDIO-R)

component inputs.

ÔANT (75Ω)

75ΩCoaxial connector for Antenna/Cable

Network.

AV IN (AUDIO-L/R)

Audio inputs for external devices, such as

a camcorder or VCR.

ÒS-VIDEO

Video input for external devices with an

S-Video output, such as a camcorder or VCR.

ÚAUDIO OUT

Audio outputs for external devices.

ÆVIDEO

Video input for external devices, such as

a camcorder or VCR.

Note

•Please be sure to match the color coded input terminals and cable jacks.

BN68-00835E-00Eng_(002~031) 5/30/05 5:11 PM Page 10

Autres manuels pour HP-R4262

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Samsung Écran plasma

Samsung

Samsung SPN4235 Manuel utilisateur

Manuels Écran plasma populaires d'autres marques

Hitachi

Hitachi CMP307XE Manuel utilisateur

Panasonic

Panasonic TH-42PF20E Manuel utilisateur

Hitachi

Hitachi 42HDX99/DW2-U Manuel utilisateur

Panasonic

Panasonic TH42PH20E Manuel utilisateur

Sanyo

Sanyo PDP42H2W Manuel utilisateur

Diamond Digital

Diamond Digital DV42P2 Manuel utilisateur

Panasonic

Panasonic TH-50PH30E Manuel utilisateur

Panasonic

Panasonic TH42PF20ER Manuel utilisateur

Panasonic

Panasonic TH42PH20ER Manuel utilisateur