Samsung SyncMaster 460UT Manuel utilisateur

Installation Guide

460UT 460UTN

BN68-01537F.indb 1 2009-12-18 12:17:49

Contents

Safety Precautions 01 Safety Precautions

Introduction 02 Unpacking

02 Attaching the bracket

to the monitor

03 Mounting the bracket

onto a wall

06 Arranging the monitors

07 Fine tuning

10 Detaching the monitors

Product speciﬁcations 11 Product speciﬁcations

Product drawings 12 Product drawings

13 Drawings

BN68-01537F.indb 1 2009-12-18 12:17:49

]Warning

Failure to observe the instructions herein can cause serious injury or death.

1. Be sure to contact an installation expert authorized by your dealer to perform the installation.

• Installation by a non-professional may cause personal injury.

If you are planning to relocate or replace the

product after installation, be sure to consult with

an installation expert authorized by your dealer.

After installation, do not apply excessive force

or physical pressure on the product.

2. Do not let your children play in the vicinity of the product.

• They may bump their head or body against the corner of the product and suffer personal injury.

3. Be careful not to let the back of the product hit against the wall when it is rotated or the angle is adjusted.

• You can protect the wall and product from any damage by attaching a piece of sponge to each corner of the product.

4. Do not install the product on a wall that cannot bear the weight of the product.

• The product may fall, and get damaged or cause personal injury.

5. Products installed in unusual, abnormal or extreme areas may be subject to serious performance problems due to

the surrounding environment. Be sure to consult with a Samsung service center before installing the product in

such an area.

• Areas exposed to an excessive amount of fine particles or moisture, chemicals, extreme temperatures, high humidity,

automobiles, etc.

The information contained herein is for your safety and to prevent any loss of

property. Please read the instructions carefully to use the product correctly.

This mandatory sign is used to emphasize the instructions that must be observed.

Safety Precautions

English - 1

BN68-01537F.indb 1 2009-12-18 12:17:49

Unpacking

Monitor-mount bracket ͽWall-mount bracket ;Screw ͽ

(M8 X 60mm) : x4

Screw ;

(M8 X 30mm) : x4 Coupler : x2 Screw holder: x4

Wood screw

(M5 X 50mm) : x8 Safety fastener: x2 Screw Ϳ

(M5 X 10mm) : x2

Attaching the bracket ͽto the monitor

1. Assemble the four screws ͽand the screw holders, and fasten them to fix the bracket ͽto the monitor as

shown in the picture below.

]Warning

Check to confirm that the bracket ͽis fastened to the monitor.

English - 2

BN68-01537F.indb 2 2009-12-18 12:17:51

Mounting the bracket ;onto a wall

Fix the bracket ;tightly against the wall using the wood screws.

1 2

3 4

5 6

As shown in the picture above, fasten in order from Ηto Ξ.

N If it is difficult to fasten the screws into the specific holes, fasten the screws in the adjacent holes.

÷Installing the Video Wall

3 4

1 2

NInstalling the Video Wall should be done by two persons or more.

NThe couplers are only used to install a Video Wall in order to leave a gap between the monitors that make up

the Video Wall. Do not use them when installing only one monitor.

]Warning

1. Before you install on the Video

Wall, check the wall strength

considering the total weight of the

monitors and brackets you want

to install.

- Weight of a monitor: 30kg

- Weight of a bracket: 7kg

2. If you intend to install on a Video

Wall that is four layers or more,

take into consideration the air

conditioning system. Consult with

an expert before installation as

heat from the monitors may cause

problems.

]Warning

1. Ensure you check the wall strength, and do

the reinforcing work before installation if the

wall is not sufficiently strong.

2. The provided screws are for wood.

3. Check the wall and use proper screws

according to the material of the wall, such as

marble, steel plate or concrete.

öHow to fasten a screw

Make a hole using a 3X50

drill.

Clean the inside of the

drilled hole.

Fasten the wood screw into

the hole.

öWhen drilling a hole into a wall, make sure

you use a drill bit and drill of the specified

diameter.

Otherwise, there may be safety problems.

English - 3

BN68-01537F.indb 3 2009-12-18 12:17:52

2. Fix the two couplers into the middle and lower parts of the bracket ;respectively.

Fasten the two screws ;into the bracket ;.

3. To align horizontally, attach the bracket Θto the couplers on the bracket Ηusing the screws ;.

(Should be done by two persons or more.)

After fixing tightly, attach the assembly to the wall following step 1.

Fasten the screws tightly so that there is no space between the couplers and the bracket ;.

4. To align vertically, insert the legs of the bracket Ιcompletely to the top of the bracket Ηto assemble the two

brackets.

English - 4

BN68-01537F.indb 4 2009-12-18 12:17:52

1 1

5. Following steps 2 to 4, fix the bracket to the location Κ.

NIncrease the number of brackets following the steps above.

]Warning

As shown in the pictures, the

bottom of the bracket Ιmust be

inserted fully into the top of the

bracket Η.

English - 5

BN68-01537F.indb 5 2009-12-18 12:17:53

Arranging the monitors

1. Hook the monitor to which the bracket ͽis attached on the poles of the wall-mount bracket ;.

]Warning

Be sure not to put pressure on the panel with your hands when handling the monitor. Otherwise, you may

break the panel.

2. To prevent the monitor from becoming loose, fasten the safety fasteners using the screws Ϳ.

Fasten them on both sides.

]

Warning

Ensure the hooks

are suspended

securely on the

poles.

English - 6

BN68-01537F.indb 6 2009-12-18 12:17:54

]Warning

Since the monitor may fall during installation, ensure you fasten the safety fasteners on both sides.

3. Arrange the monitor on each bracket following steps 1 and 2.

]Warning

Be careful not to catch your finger during installation.

Fine tuning

NAfter arranging the monitors, if they do not seem well-proportioned, adjust them using the fine-tuning screws

on the brackets.

NBe sure not to leave any height differences or gaps between the monitors.

English - 7

BN68-01537F.indb 7 2009-12-18 12:17:56

1. Correcting height difference between the front and back of a monitor.

If you turn the fine-tuning screw clockwise or counterclockwise, the monitor will move forward or backward

respectively.

The fine-tuning screw’s maximum movement range is 10mm.

Moving the monitor forward Moving the monitor backward

2. Correcting height difference between upper and lower monitors.

If you turn the fine-tuning screw on the bottom of the monitor clockwise or counterclockwise, the monitor will

move up or down respectively.

Lowering the monitorRaising the monitor

English - 8

BN68-01537F.indb 8 2009-12-18 12:17:57

Autres manuels pour SyncMaster 460UT

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Samsung Moniteur

Samsung

Samsung T220 - SyncMaster - 22" LCD Monitor Manuel utilisateur

Samsung

Samsung SyncMaster 400CX-2 Manuel utilisateur

Samsung

Samsung S27B800PXM Manuel utilisateur

Samsung

Samsung SyncMaster T240M Manuel utilisateur

Samsung

Samsung SyncMaster 710NT Manuel utilisateur

Samsung

Samsung T260 - SyncMaster - 25.5" LCD Monitor Manuel utilisateur

Samsung

Samsung NC191 Manuel utilisateur

Samsung

Samsung UD55E-P Manuel utilisateur

Samsung

Samsung SyncMaster B2230HN Manuel utilisateur

Samsung

Samsung S24A336NH Manuel utilisateur

Samsung

Samsung SyncMaster 755DFG Manuel utilisateur

Samsung

Samsung SyncMaster 180T Manuel utilisateur

Samsung

Samsung SyncMaster 592V Manuel utilisateur

Samsung

Samsung SyncMaster S19B370N Manuel utilisateur

Samsung

Samsung LN37D567F9H Guide de démarrage rapide

Samsung

Samsung C27JG50QQ Series Manuel utilisateur

Samsung

Samsung SyncMaster 2063UW Guide de l'utilisateur

Samsung

Samsung SyncMaster 460UT Manuel utilisateur

Samsung

Samsung UD55D Manuel utilisateur

Samsung

Samsung S19E200BW Manuel utilisateur

Samsung

Samsung UD46D-P Manuel utilisateur

Samsung

Samsung XL30 - SyncMaster - 30" LCD Monitor Manuel utilisateur

Samsung

Samsung 2032NW - SyncMaster - 20" LCD Monitor Manuel utilisateur

Samsung

Samsung SyncMaster 2263UW Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation