Samsung SyncMaster 151T Manuel utilisateur
Main Page On-Screen Display
Safety Instructions Troubleshooting
Notational Check List
Power Q & A
Installation Self-Test Feature Check
Cleaning
Other
Introduction Specifications
Unpacking General Specifications
Front PowerSaver
Rear Preset Display Modes
Setup Information
Connecting Your Monitor Service
Installing the Monitor Driver Terms
Automatic Regulatory
Manual Natural Color
For Better Display
Authority
Notational
Power
Installation
Clean
Other
Failure to follow directions noted by this symbol could result in bodily harm or damage to
equipment.
Prohibited Important to read and understand at all times
Do not disassemble Disconnect the plug from the outlet
Do not touch Grounding to prevent an electric shock
Notational
Power
Installation
Clean
Other
When not used for extended periods of time, set your PC to DPMS. If using
a screen saver, set it to the active screen mode.
zIf the size of your monitor is small, or if the same image is present for long
periods of time, you may see afterimages due to damage to the
flourescent substance on the inside of the TFT-LCD.
Do not use a damaged or loose plug.
zThis may cause an electric shock or fire.
Do not pull the plug out by the wire nor touch the plug with wet
hands.
zThis may cause an electric shock or fire.
Use only a properly grounded plug and recepticle.
zAn improper ground may cause electric shock or equipment
damage.
Do not excessively bend the plug and wire nor place heavy objects
upon them, which could cause damage.
zFailure to do so may cause an electric shock or fire.
Disconnect the plug from the outlet during storms or lightening or
if it is not used for a long period of time.
zFailure to do so may cause an electric shock or fire.
Do not connect too many extension cords or plugs to an outlet.
zThis may cause a fire.
Notational
Power
Installation
Clean
Other
Do not cover the vents on the monitor cabinet.
zBad ventilation may cause a breakdown or fire.
Put your monitor in a location with low humidity and a minimum of
dust.
zAn electric shock or fire could result inside the monitor.
Do not drop the monitor when moving it.
zThis may cause damage to the product or human body.
Place the monitor on a flat and stable surface.
zThe monitor can cause injury by falling.
Set down the monitor carefully.
zIt could be damaged or broken.
Notational
Power
Installation
Clean
Other
When cleaning the monitor case or the surface of the TFT-LCD, wipe with a
slightly moistened, soft fabric.
Do not spray detergent directly on the monitor.
Use the recommended detergent with a smooth cloth.
If the connector between the plug and the pin is dusty or dirty,
clean it properly with a dry cloth.
zA dirty connector can cause an electric shock or fire.
Do not set a glass of water, chemicals or any small metal objects
on the monitor.
zThis may cause damage, electric shock or a fire.
zIf a foreign substance gets into the monitor, disconnect the plug
and then contact a service center.
Notational
Power
Installation
Clean
Other
Do not remove cover(or back). No user serviceable parts inside.
zThis may cause an electric shock or a fire.
zRefer servicing to qualified service personnel.
If your monitor does not operate normally - in particular, if there are
any unusual sounds or smells coming from it - unplug it
immediately and contact an authorized dealer or service.
zThis may cause an electric shock or a fire.
Do not place any heavy objects on the monitor.
zThis may cause an electric shock or a fire.
For each hour of looking at the monitor, you should let your eyes
rest for 5 minutes.
zThis will reduce eye fatigue.
Do not use or store inflammable substances near the monitor.
zThis may cause an explosion or fire.
Do not try to move the monitor by pulling on the wire or the signal
cable.
zThis may cause a breakdown, electric shock or a fire due to
damage to the cable.
Do not move the monitor right or left by pulling only the wire or the
signal cable.
zThis may cause a breakdown, electric shock or a fire due to
damage to the cable.
Never insert anything metallic into the monitor openings.
zThis may cause an electric shock, fire or injury.
Keep the monitor away from any magnetic substances.
zThis may cause discoloring or distortion of the image.
Unparking
Front
Rear
Power Cord
DC-Adapter
Quick Setup Guide
Warranty Card
(Not available in all locations)
User's Guide and Driver Installation
CD
Monitor and Stand
Please make sure the following items are included
with your monitor. If any items are missing,
contact your dealer.
Unparking
Front
Rear
1.Analog(A)/Digital(B)
indicator
Whenpush the 'Exit'button, then Selects the Video signal(Aor B)while
the OSD is off.
2. Auto button Use this button to auto adjustment direct access.
3. Exit button Use this button to Exit the active menu or the OSD.Selects the Video
signal(A or B)while the OSD is off.
4,5. Adjust buttons These buttons allow you to highlight and adjust items in the menu.
6. Menu button Use this button to open the OSD and activate a highlighted menu item.
7. Power button Use this button to turn the monitor on and off.
8. Power indicator This light glows green during normal operation, and blinks green once as
the monitor saves your adjustments.
Note: See PowerSaver described in the manual for further information regarding power saving functions.
For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for
long periods.
Unparking
Front
Rear
(The configuration at the back of the monitor may vary from product to product.)
1. DVI Cable Connect the DVI Cable to the DVI Cable on the back of your Comupter.
2. D-sub Cable Connect the D-sub Cable to the 15-pin, D-sub connector on the back of
your Computer.
3. Power Port Connect the DC Adapter for your monitor to the power port on the back
of the monitor.
Note: See Connecting Your Monitor for further information regarding cable connections.
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Samsung Moniteur
Samsung
Samsung S27H850QF series Manuel utilisateur
Samsung
Samsung SyncMaster 773DFX Manuel utilisateur
Samsung
Samsung 997MB - SyncMaster - 19" CRT Display Manuel utilisateur
Samsung
Samsung SyncMaster 2043SN Manuel utilisateur
Samsung
Samsung F22T45 Series Manuel utilisateur
Samsung
Samsung SMT-1923 Manuel utilisateur
Samsung
Samsung 520DXN - SyncMaster - 52" LCD Flat Panel... Manuel de formation
Samsung
Samsung SyncMaster B2030 Manuel utilisateur
Samsung
Samsung SyncMaster 940Fn Manuel utilisateur
Samsung
Samsung SyncMaster P2070 Manuel utilisateur
Samsung
Samsung SyncMaster 400CX-2 Manuel utilisateur
Samsung
Samsung GVI Security SMT-1712 Manuel utilisateur
Samsung
Samsung C34H890W Series Manuel utilisateur
Samsung
Samsung 930ND - 64 MB RAM Manuel utilisateur
Samsung
Samsung RB19NS Manuel utilisateur
Samsung
Samsung SyncMaster P50FN Manuel utilisateur
Samsung
Samsung 3 SERIES Manuel utilisateur
Samsung
Samsung SyncMaster 750V Manuel utilisateur
Samsung
Samsung SyncMaster 225MW Manuel utilisateur
Samsung
Samsung LH85WMRWLGCXEN Manuel utilisateur
