Samsung Yepp YP-NDU64B Manuel utilisateur

CD-quality sound.

MP3 refers to MPEG1 LAYER3. MP3 is a music file made of

audio data compression technology with no degradation of

the original sound.

yepp’ is an advanced digital audio player which doesn't need a

cassette tape or CD. You can download MP3 files from the Internet

or PC Communications and enjoy great sound any time, any place.

What is yepp’?

What is MP3?

1_eng_nd 00/12/5 1:47 PM Page 2

English

Parts Description

LCD panel

Mode/Select repeat

Voice recording

Repeat

Erase Connection cable terminal

Microphone

Equalizer

Reverse

Forward

Volume control

Power On/

Play/Pause

Power Off/Stop

SMC open

Remote controller

jack

Hold switch

SMC eject

SmartMedia Card slot

Battery door

Power On/Play/Pause

Reverse

LCD panel

Equalizer/Repeat

Mode

Forward

Volume control

Select repeat

Power Off/Stop

Hold switch

Belt Clip

1_eng_nd 00/12/5 1:47 PM Page 3

Listening to music through yepp’

Insert batteries into the battery compartment, and then

connect the remote controller (earphone) correctly.

Turn on the Power

Press the button on the yepp player or remote

controller.

Playback

Press the button on the yepp player or the remote

controller.

NNootteeTo pause playback, press the button the mark

blinks on the remote controller display panel. Press the

button again to resume playback. Every buttons

enable the lamp on the panel to blink for 3 seconds.

Control Volume

Control volume with the volume control button (-/+) on

your yepp player or remote controller.

NNootteeVolume can be controlled from 00 to 20. Press shortly to

move up or down by 1 step. Press and hold to move

continuously.

Stop Music

Press the STOP button ( ) of your yepp player or remote

controller to stop playing back sound.

NNootteeIf the unit is in the Stop mode for more than 3 minutes it

will power off automatically.

Searching the MP3 files at a faster speed

Press the and buttons too move to the next track.

To search within a song being played back

Press and hold the FF button ( ) while a song is being

played back to fast forward. Release the button to

resume playback.

NNootteePress and hold the REW ( ) button while a song is

being played back to move quickly backward.

To skip to the next song while another song is being

played back

Press the FF button to move one track forward.

To search a song in stop mode

1Press the FF button to move one track forward. To

play back the song that you chose, press the PLAY

button ( ).

2Press the REW button to move one track backward.

NNootteeIf the REW button is pressed before the first 5 seconds of

the track has played, the previous song will be repeated.

If the REW button is pressed after 5 seconds has played,

the current song will be repeated.

1_eng_nd 00/12/5 1:47 PM Page 4

English

Hold Function

While the Hold switch on your yepp player is on

Buttons on the yepp won't work. Each time a button is

pressed, “Hold” will appear for a short time on the display

only the buttons on your remote controller will work.

While the Hold switch on your remote controller is on

The mark will appear on the display panel. None of

the buttons on your remote control will work. The buttons

on your yepp will work.

Repeating Tracks/Section

Press the “A

↔

B”button of your remote controller to

repeat the track or section that you selected. Setting 'Repeat

Track' needs a minimum of two seconds of play time.

1Press the A↔Bbutton of your remote control at the

start point of the track or section that you want to

repeat. Then, 'B' blinks on the display panel.

2Press this button again at the end point of the track or

section that you want to repeat.

NNootteeThe section from point A to point B that you selected will

automatically be repeated. To cancel this function, press

the A↔B button again. While tracks/sections are

repeated, only the Stop and A↔B buttons work.

Setting the Modes

Each time the EQ/REP button of your remote controller is

pressed and held, the modes will change in the order of

REP, ALL, SHU and INT.

◆REP mode : Repeats current track.

◆ALL mode : Repeats all the tracks.

◆SHU mode : Enables random playback.

◆INT mode : Enables you to repeat the first 10

seconds of the tracks saved (for 10

seconds each).

Using the Equalizer

Each time the EQ/REP button of your remote controller is

pressed, the equalizer modes will be changed in the

order of Classic, Jazz, Rock and Normal.

Normal mode is not indicated on the panel.

Using the 3D Sound

Press the 3D buttonto add Surround 3D sound effect to

four different modes (Normal, Classic, Jazz, Rock).

The surround 3D sound is available only in the MP3

mode.

1_eng_nd 00/12/5 1:47 PM Page 5

Voice Recording

Recording the voice messages

1Press the MODE button on the main unit to switch

into the voice mode.

- Voice mode can only be activated in the stop mode.

2Press the REC button and the voice messages will be

recorded through the microphone.

- Press the Stop button ( ) to stop recording. If you

repeat this operation over and over, the voice

messages will be recorded in the sequence of

V001, V002....V00N.

NNoottee

- This feature allows you to easily record lectures at school or

institute, interview and conference messages, etc. It therefore

enhances study effectiveness and lets you keep important

things for a long time.

- The player will automatically stop recording when the memory

becomes full.

- The voice messages are recorded on the built-in memory. If the

memory is short in capacity, however, they will be recorded on

the smart media card (in the sequence of V001, V002... V00N).

- Be careful not to press the Erase button long because the

erasing function may run.

- Voice recording is made only on the main system.

Playing the recorded voice messages

1Use the FF ( ) and REW ( ) buttons to select the

track (V001, V002...) you prefer.

2Press the button to playback the selected track.

You can pause the track by pressing the button

once again.

- Press the button again to resume playback.

NNoottee

- When you press the button without selecting V001,

V002... V00n, you can listen to the recorded track that applies

to the number currently shown on the LCD panel.

- Press the FF or REW button during playback to move forward

or in reverse at a faster speed.

Playing the recorded voice messages

1Use the FF and REW buttons to select the track (V001,

V002...) you want to erase.

2Press the ERASE button for at least 1 second and the

message "Erase?" will appear on the LCD panel. Then

press the button to erase the selected track.

NNoottee

- To cancel the erasing function press the button.

- After the selected track is erased, the player will show the next

track number.

1_eng_nd 00/12/5 1:47 PM Page 6

English

Listening to FM Radio

To Search the Frequency Band

1Press the MODE button to switch to FM mode.

2Press and hold either REW ( ) or FF ( ). Then, the

unit will automatically search from station to station

(Auto Search).

3To search manully in one step increments, press and

release either REW or FF.

NNoottee

- In the FM mode, the LCD panel backlight is not turned on.

- In the FM mode, the screen display does not appear in the

main system.

- Once the power is turned off, initialization will be made at

MP3 mode. To set to FM mode, press the MODE button again.

- When in the FM mode, do not attempt Format, Delete or

Download.

To Save Radio Station

1At the radio station frequency that you want to save,

press the EQ/REP button.

2A saving location letter (a, b, c, d, e) blinks in front of

the radio station that the screen display shows, press

the A↔Bbutton to choose one saving location.

Then, press the EQ/REP button once more to save.

- The saving location letters (a, b, c, d, e) blink each

time the A

↔

Bbutton is pressed.

- Once a radio station is saved, you can move

directly to the saved location by clicking on the

↔

Bbutton.

NNoottee

- Max. five stations (a, b, c, d, e) can be saved.

- You can replace one station with another at each saving location.

But it is not possible to delete a saved station.

- Press the Stop button for a moment to turn off the system.

1_eng_nd 00/12/5 1:47 PM Page 7

Connecting yepp’to PC or MAC

Minimum PC System Requirements

- Pentium 133 MHz

- Windows 98/2000

- 20 MB Free Disk Space

- CD-ROM Drive (Optimum:8 X and more)

- Built-in USB Port

1Connect the USB cable to the USB port of the

computer.

2Turn the player on and connect the other end of the

cable to the download connector.

NNoottee

- Be sure to install the yepp’Explorer before connecting your

yepp’to PC or MAC. When the message “Add new hardware

wizard”appears on the screen, click [Cancel] and then install

the yepp’Explorer.

- If the USB driver is not installed automatically, refer to page

10.

1_eng_nd 00/12/5 1:47 PM Page 8

English

Installing Software on PC

Insert the Installation CD into the CD-ROM drive.

The picture below appears when inserting the CD.

1Click

Click

2Click the next button on each successive window.

NNootteeInstall the other program or download the files

depending on your requirement.

yepp’Explorer

1Click

Click

2Click the next button on each successive window.

NNoottee

- If the Real Network home page is not connected

automatically when the Realjukebox program has been

installed, try to access “http://www.real.com”.

- Install the other program or download the files depending

on your requirement.

RealJukebox

This software lets you listen to MP3 music on your

computer digitally and enables you to encode your

CDs into MP3 Files.

1_eng_nd 00/12/5 1:47 PM Page 9

Installing Software on PC (Windows 2000)

If USB port error occurs after installing the yepp’explorer

in Windows 2000, do the following steps 1~3.

1Copy the secypusb. sys file from the installation CD.

2Paste the secypusb. sys into 'Drivers' from the

system32 folder in Windows 2000 (System Root

Directory). (ex: / WinNT/ system/Drivers)

NNootteeEven though the secypub. sys file is present in the

existing folder, by sure to run Change File.

3Re-boot the computer.

Installing Software on MAC

Insert the Installation CD into the CD-ROM drive.

The picture below appears when inserting the CD.

1Execute the yepp’Explorer.

- Double-click the yepp’Explorer icon.

2Click the button on each successive window.

- After all installations are complete, the yepp’

Explorer folder is created.

Formatting flash memory (continued...)

yepp’Explorer

1Execute the yepp’Explorer.

- Double-click the icon of the yepp’Explorer on the

desktop.

2Click [File], [Format] and select [Flash Memory].

NNoottee

- Before formatting the flash memory or the SmartMedia Card,

connect your yepp’to PC and click Refresh icon on the yepp’

Explorer.

- If the optional SmartMedia Card is installed in the yepp’, file(s)

can also be saved to the card by clicking Copy to and selecting

Smart Media Card.

- You can also format the flash memory or the SmartMedia Card

by pressing the right button on the mouse and selecting

Format.

- Formatting Flash memory (or Smart Media Card) will delete all

existing files.

RealJukebox

1Connect your yepp’to PC and execute the RealJukebox.

2Click/Double-Click through the following items.

Devices -->Samsung Ne....

3Click Configure icon and Select Format_Flash_

Card/Format_Internal_Memory.

1_eng_nd 00/12/5 1:47 PM Page 10

Formatting flash memory

NNoottee

- Before formatting the flash(SmartMedia) Card or the Internal

(flash) memory, press F5 Key to refresh. (Or click

View↔Refresh in the Main menu)

- Formatting Flash memory(or Smart Media Card) will delete all

existing files.

MAC

Execute the yepp’Explorer.

- Double-click the yepp´Explorer icon in the HDD.

2Click [File], [Format] and select [Flash Memory].

NNoottee

- Before formatting the flash memory or the SmartMedia Card,

connect your yepp´to PC and click Refresh icon on the yepp´

Explorer.

- If the optional SmartMedia Card is installed in the yepp´, file(s)

can also be saved to the card by clicking [Copy to] and

selecting SmartMedia Card.

- Formatting Flash memory (or Smart Media Card) will delete all

existing files.

Options (continued...)

yepp’Explorer

English

- Auto

The device has been initially set

"Auto".

- USB

When the communication is

not smooth in Auto, select an

USB cable.

- Select when uploading

the SC4 file on the

form of the WAV file.

NNoottee

Install the USB driver in the following sequence:

"Select USB (setting option)"-> "Turn on the yepp"-> "Connect a

cable to the PC". Then, the message of 'looking for a new device'

appears and simultaneously the USB driver is installed. If the

USB driver is not installed, even though you follow the above

instructions. (contact your PC vendor or service center.)

1_eng_nd 00/12/5 1:47 PM Page 11

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Samsung Lecteur multimédia

Samsung

Samsung YP-GS1CB Manuel utilisateur

Samsung

Samsung YP-GS1CB Manuel utilisateur

Samsung

Samsung YH-925GS Manuel utilisateur

Samsung

Samsung GX-SM530CF Manuel utilisateur

Samsung

Samsung SBB-SSE Manuel d'instructions

Samsung

Samsung YP-Q1JEB - 16 GB Digital Player Manuel utilisateur

Samsung

Samsung Yepp YP-700i Manuel utilisateur

Samsung

Samsung Home Sync Manuel utilisateur

Samsung

Samsung SBB-SSN Manuel utilisateur

Samsung

Samsung YH-925GS Manuel utilisateur

Samsung

Samsung MAX-G55 Manuel utilisateur

Samsung

Samsung YP-G1CW Manuel utilisateur

Samsung

Samsung YP-20S/T Manuel utilisateur

Samsung

Samsung YH-925GS Manuel utilisateur

Samsung

Samsung Napster YP-910 Manuel utilisateur

Samsung

Samsung YP-G1CW Manuel utilisateur

Samsung

Samsung SBB-SS08EL1/EN Manuel utilisateur

Samsung

Samsung YP-G1CWY/XAA Manuel utilisateur

Samsung

Samsung YH-999 Manuel utilisateur

Samsung

Samsung GX-SM530CF Manuel utilisateur

Samsung

Samsung HARMAN JBL MP350 Classic Manuel utilisateur

Samsung

Samsung MP-80S Manuel utilisateur

Samsung

Samsung YP-G1CWY/XAA Manuel utilisateur

Samsung

Samsung SBB-SS08E Manuel utilisateur

Manuels Lecteur multimédia populaires d'autres marques

Visual Land

Visual Land Impulse Manuel utilisateur

limHD

limHD 200i Manuel utilisateur

Transcend

Transcend DMP10 Manuel utilisateur

Philips

Philips GoGear Muse SA2MUS08 Manuel utilisateur

Fantec

Fantec MM-HDRL Manuel utilisateur

Dune HD

Dune HD Duo 4K Manuel utilisateur

IAdea

IAdea HMP-505S Manuel utilisateur

Camos

Camos MMS-1000 Manuel utilisateur

Energy

Energy 75 Series Manuel utilisateur

Z3 Technology

Z3 Technology DME-03 Manuel utilisateur

Sony

Sony SVR-2000 Guide de l'utilisateur

Meicheng

Meicheng HD-1080K12 Manuel utilisateur

DENAFRIPS

DENAFRIPS ARCE Manuel utilisateur

Topaz

Topaz CMS Media Player Instructions d'utilisation

InFocus

InFocus LightCast Manuel utilisateur

IconBiT

IconBiT XDS1003D Manuel utilisateur

Quanmax

Quanmax QDSP-2090 Series Manuel utilisateur

Trigon Elektronik

Trigon Elektronik CHRONOLOG Manuel utilisateur

Samsung yepp YP-NDU64B Manuel utilisateur

Manuels Lecteur multimédia populaires d'autres marques