Samsung LW17M24C Manuel utilisateur

English-1

Viewing the Connection Panel

Whenever you connect an audio or video system to your set,

ensure that all elements are switched off.

Refer to the documentation supplied with your equipment for

detailed connection instructions and associated safety precautions.

Power Input

Option

< LW1 M24C > < LW15M23C / LW20M21C / LW20M22C >

SCART

Power Input

01-BN68-00633F-02Eng.qxd 5/23/04 1:13 PM Page 5

All manuals and user guides at all-guides.com

all-guides.com

English-2

Viewing the Connection Panel

Connecting an Aerial or Cable Television Network (depending on the model)

To view television channels correctly, a signal must be received by the set from one of the

following sources:

- An outdoor aerial

- A cable television network

- A satellite network

Connecting a Set-Top Box, VCR or DVD

- Connect the VCR, or DVD SCART cable to the SCART connector of the VCR, or DVD.

- If you wish to connect both the Set-Top Box and VCR (or DVD), you should connect the

Set-Top Box to the VCR (or DVD) and connect the VCR (or DVD) to your set.

Connecting a Computer

- Connect the 15 Pin D-SUB connector to the PC video connector.

- Connect the stereo audio cable to the “Audio (ST)” jack on the rear of your set and the other end to

the “Audio Out” jack of the sound card on your computer.

Pin Separate H/V Composite H/V

1 Red (R) Red (R)

2 Green (G) Green (G)

3 Blue (B) Blue (B)

4 Grounding Grounding

5 Grounding (DDC return) Grounding (DDC return)

6 Grounding - Red (R) Grounding - Red (R)

7 Grounding - Green (G) Grounding - Green (G)

8 Grounding - Blue (B) Grounding - Blue (B)

9 No connection No connection

10 Grounding - Sync. / Self test Grounding - Sync. / Self test

11 Grounding Grounding

12 DDC - SDA (Data) DDC - SDA (Data)

13 Horizontal Sync. Horizontal/Vertical Sync.

14 Vertical Sync. Not used

15 DDC - SCL (Clock) DDC - SCL (Clock)

➣15 Pin D-SUB connector

01-BN68-00633C-00Eng.qxd 4/18/04 7:35 AM Page 6

All manuals and user guides at all-guides.com

English-3

Viewing the Connection Panel

Connecting External A/V Devices

- Connect RCA or S-VIDEO cables to an appropriate external A/V device such as a VCR, DVD

or Camcorder

- Connect RCA audio cables to “(MONO)L-AUDIO-R” on the rear of your set and the other ends to

corresponding audio out connectors on the A/V device

Connecting Headphones

- Plug a set of headphones into the 3 5mm mini-jack socket on the right-side of the set

- Headphones may be connected to the headphone output on the right-side of the set

While the headphones are connected, the sound from the built-in speakers will be disabled.

Kensington Slot

-This television has been designed to apply a burglarproof lock (See next page.)

Retractable Stand

Note: The maximum tilt angle is 13 degrees in the backward direction

Please do not tilt the TV outside the specified range Using excessive force

to tilt the TV may cause permanent damage to the mechanical part of the stand

< LW20M21C / LW20M22C > model swivels left and right

< LW15M23C / LW17M2 C > < LW20M21C / LW20M22C >

01-BN68-00633F-02Eng.qxd 5/14/04 9:02 AM Page 7

All manuals and user guides at all-guides.com

English-4

Using the Anti-Theft Kensington Lock

Figure 2

Figure 1

Cable

The Kensington lock is a device used to

physically fix the system when using it in

a public place. The locking device has to

be purchased separately.

The appearance and locking method may

differ from the illustration depending on

the manufacturer. lease refer to the

manual provided with the Kensington

lock for proper use.

1. Insert the locking device into the Kensington slot on the LCD TV (Figure 1),

and turn it in the locking direction (Figure 2).

2. Connect the Kensington lock cable.

3. Fix the Kensington lock to a desk or a heavy stationary object.

Installing VESA compliant mounting devices

SCART

Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with the four

screws that come with the arm-type base, wall mount hanger or other bases.

Mounting pad

< LW15M23C / LW17M24C > < LW20M21C / LW20M22C >

04-BN68-00633F-02Eng.qxd 5/13/04 5:17 PM Page 51

All manuals and user guides at all-guides.com

English-5

Installing the Wall Mount Kit

Components

lease use provided components or parts to install the Wall Mount Kit.

Mark the location of hole on the wall using installation guide.

Make over 35mm- depth- hole on the marked location using

5.0-diameter drill.

Fix anchors on each hole on the wall.

Connect bracket to the wall with screws after fitting anchors

into the bracket holes.

Note : If the bracket is not firmly fixed to the wall, LCD TV can fall off.

Note : This installation is to be used when attaching the wall mount to a concrete wall.

When attaching to other building materials, please contact your nearest dealer.

How to assemble the all Mount Kit

Bracket Anchors : 3EA Screws : 3EA Installation Guide

After placing LCD TV on cushion or other soft material, turn over

LCD TV in the direction of arrow while grabbing bottom of the

stand.

04-BN68-00633F-02Eng.qxd 5/13/04 5:17 PM Page 52

All manuals and user guides at all-guides.com

English-6

Installing the Wall Mount Kit

How to assemble the Wall Mount Kit

When bracket is assembled on the wall

How to hang LCD TV up on a hook When installation is completed

(1)

Angle ad ustment section of

general stand-besd LCD TV

(2)

Angle ab ustment section

while converting the form

(1->3, 3->1)

(3)

Angle ad ustment section of

wall-mounted LCD TV

Ad ust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be

completely fixed to the bracket.

Remove Installation Guide after completing setup of monitor on the wall.

Push the LCD TV up and shift to the right to detach it from bracket.

When moving or transferring to other areas, reverse No. 3 procedure so as to disconnect LCD TV with ease.

Picture(1) shows the ad ustment angle(0°~ 13°)when you use LCD TV in its general form(stand-based LCD TV).

Excessive tilting can turn LCD TV over which might cause damage to LCD TV.

Picture(2) shows the ad ustment angle(13°~ 80°)when you convert stand-based LCD TV into wall-mounted one.

Picture(3) shows the ad ustment angle(0°~ 10°)when you use wall-mounted LCD TV after fixing it to wall.

Note : Picture (2) shows the angle adjustment section while LCD TV is being converted rom stand-based one to

wall-mounted one or vice versa.

- Click" sound indicates section change rom 1 to 2 or 3 to 2(1->2, 3->2).

04-BN68-00633F-02Eng.qxd 5/14/04 12:58 PM Page 53

All manuals and user guides at all-guides.com

all-guides.com

English-7

Installing the Wall Mount Kit

Components

Please use provided components or parts to install the Wall Mount Kit.

Mark the location of hole on the wall using installation guide.

Make over 35mm- depth- hole on the marked location using

5.0-diameter drill.

Fix anchors on each hole on the wall.

Connect bracket to the wall with screws after fitting anchors

into the bracket holes.

Note : I the bracket is not irmly ixed to the wall, LCD TV can all o .

Note : This installation is to be used when attaching the wall mount to a concrete wall.

When attaching to other building materials, please contact your nearest dealer.

How to assemble the Wall Mount Kit

Bracket Anchors : 4EA Screws : 4EA Installation Guide

You may use LCD TV right after fixing it to the wall since stand is

wrapped already turned over as shown in the picture

When using LCD TV in stand-based form, place the product

on a cushion or other soft materials. Then turn over

stand following the arrow direction below only after pressing button on

the connected part where LCD TV is attached to stand.

(Turn over stand in the opposite direction after pressing button when

using LCD TV in wall-mounted form as well.)

04-BN68-00633F-02Eng.qxd 5/14/04 12:58 PM Page 54

All manuals and user guides at all-guides.com

English-8

Installing the Wall Mount Kit

How to adjust an angle

When bracket is assembled on the wall

How to hang monitor up on a hook When installation is completed

(1)

Angle ad ustment section of

general stand-besd LCD TV

(2)

Angle ab ustment section

while converting the form

(1->3, 3->1)

(3)

Angle ad ustment section of

wall-mounted LCD TV

Ad ust LCD TV to the hook on the bracket and move in the direction of the arrow(Left) so that LCD TV can be

completely fixed to the bracket.

Remove Installation Guide after completing setup of LCD TV on the wall.

Push the LCD TV up and shift to the right to detach it from bracket.

When moving or transferring to other areas, reverse No. 4 procedure so as to disconnect LCD TV with ease.

Picture(1) shows the ad ustment angle(0°~ 13°)when you use LCD TV in its general form(stand-based LCD TV).

Excessive tilting can turn LCD TV over which might cause damage to LCD TV.

Picture(2) shows the ad ustment angle(13°~ 80°)when you convert stand-based LCD TV into wall-mounted one.

Picture(3) shows the ad ustment angle(0°~ 10°)when you use wall-mounted LCD TV after fixing it to wall.

Note : Picture (2) shows the angle adjustment section while LCD TV is being converted rom stand-based one to wall-

mounted one or vice versa.

04-BN68-00633F-02Eng.qxd 5/14/04 12:58 PM Page 55

All manuals and user guides at all-guides.com

Autres manuels pour LW17M24C

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Samsung Téléviseur à écran plat

Samsung

Samsung 560 Manuel utilisateur

Samsung

Samsung PN58A550S1F Manuel utilisateur

Samsung

Samsung BN68-01250B-00 Manuel utilisateur

Samsung

Samsung LN40D503F6FXZA Mode d’emploi

Samsung

Samsung LN40C630K1FXZA Manuel utilisateur

Samsung

Samsung LT-P326W Mode d’emploi

Samsung

Samsung UN55C6300SF Manuel utilisateur

Samsung

Samsung UN85S9AF Manuel utilisateur

Samsung

Samsung LN55C650L1F Manuel utilisateur

Samsung

Samsung LN-T405H Manuel utilisateur

Samsung

Samsung UN75F6400AF Manuel utilisateur

Samsung

Samsung LA52A610A3R Manuel utilisateur

Samsung

Samsung OFFICESERV 7100 Manuel utilisateur

Samsung

Samsung PN58C550 Manuel utilisateur

Samsung

Samsung UN26EH4000FXZA Instructions de montage

Samsung

Samsung UN19D4003BD Manuel utilisateur

Samsung

Samsung BN68-02900A-05 Manuel utilisateur

Samsung

Samsung BN68-02714F-02 Manuel d'installation et d'exploitation

Samsung

Samsung UN55C6400RF Manuel utilisateur

Samsung

Samsung PL50A450P1 Manuel utilisateur

Samsung

Samsung UN55F9000AF Mode d’emploi

Samsung

Samsung UN55ES8000G Manuel utilisateur

Samsung

Samsung UN65C6500VF Manuel utilisateur

Samsung

Samsung PN50C6400TF Manuel utilisateur

Manuels Téléviseur à écran plat populaires d'autres marques

Philips

Philips 32PFL7602D - annexe 1 Manuel utilisateur

Philips

Philips 42PF7321 Manuel utilisateur

Sony

Sony WEGA KE-50XBR900, KE-42XBR900 Manuel utilisateur

JVC

JVC LT-26DX7BFN Manuel utilisateur

Philips

Philips Match Line 29PT9006/12 Manuel utilisateur

Philips

Philips 37PFL5522D - annexe 2 Manuel utilisateur

Westinghouse

Westinghouse TX-42F970Z Manuel utilisateur

Philips

Philips 32PFL5332S Manuel utilisateur

Philips

Philips 40PFL5705D Manuel utilisateur

Toshiba

Toshiba 32BV500B Manuel utilisateur

Philips

Philips MathLine 32PW9765 Manuel utilisateur

Philips

Philips MatchLine FlatTV 50PF9965 Manuel utilisateur

RCA

RCA MR53R400 Manuel utilisateur

Philips

Philips 28PW8818/12 Manuel utilisateur

JVC

JVC GGT0362-001A-H Manuel utilisateur

Philips

Philips Magnavox 37MF331D/37 Manuel utilisateur

Sanyo

Sanyo FVM4212 Manuel utilisateur

Philips

Philips 47PFL7623D Manuel utilisateur