Samsung SC-D903 Guide de configuration

ENGLISH

Digital Video Camcorder

Owners Instruction Book

AF Auto Focus

CCD Charge Coupled Device

LCD Liquid Crystal Display

SCD903

ELECTRONICS

US PATENT 4415844

00792B SCD903 USA (01~27) 5/14/04 10:44 AM Page 101

ENGLISH

Notices and Safety Instructions

Safety Instructions

RISK OF ELECTRIC

SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER(OR BACK). NO USER SERVICEABLE

PARTS INSIDE, REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

This symbol is intended to alert the user to the presence of uninsulated

dangerous voltage within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of fire or electric shock.

This symbol is intended to alert the user to the presence of important

operating and maintenance instructions in the literature accompanying

this product.

To prevent electric shock, match wide blade of plug

to wide slot and fully insert.

1. READ INSTRUCTIONS:

All the safety and operating instructions should be read

before the CAMCORDER is operated.

2. RETAIN INSTRUCTIONS:

The safety and operating instructions should be retained for

future reference.

3. HEED WARNINGS:

All warnings on the CAMCORDER and in the operating instructions

should be adhered to.

4. FOLLOW INSTRUCTIONS:

All operating and maintenance instructions should be followed.

5. CLEANING:

Unplug this CAMCORDER from the wall outlet before cleaning.

Do not use liquid or aerosol cleaners.

Use a dry cloth used for dusting cabinets.

6. ATTACHMENTS:

Do not use attachments not recommended by the CAMCORDER

product manufacturer as they may be hazardous.

7. WATER AND MOISTURE:

Do not use this CAMCORDER near water;

for example, near a bathtub, wash bowl, kitchen sink, laundry

tub, in a wet basement, near a swimming pool or lake.

8. ACCESSORIES:

Do not place this CAMCORDER on an unstable cart, stand, tripod,

bracket or table. The CAMCORDER may fall, causing serious injury

to a child or adult, and serious damage to the unit.

Use only with a cart, stand, tripod, bracket, or table recommended

by the manufacturer or sold with the CAMCORDER. Any mounting

of the unit should follow the manufacturer’s instructions and should

use a mounting accessory recommended by the manufacturer.

A. An appliance and cart combination should be moved with care.

Quick stops, excessive force and uneven surfaces may cause

the appliance and cart combination to overturn.

PORTABLE CART WARNING

(Symbol provided by RETAC)

CAUTION

00792B SCD903 USA-SAFETY 5/14/04 10:44 AM Page 100

ENGLISH

Notices and Safety Instructions

9. VENTILATION:

Slots and openings in the cabinet are provided for ventilation to

ensure reliable operation of the CAMCORDER and to protect it

from overheating. These openings must not be blocked or

covered. Never place your CAMCORDER on a bed, sofa, rug,

or other similar surface: on or near a radiator or heat register.

This CAMCORDER should not be placed in a built-in installation

such as a bookcase or rack unless proper ventilation is provided

or the manufacturer’s instructions have been adhered to.

10. POWER SOURCES:

The CAMCORDER should be operated only from the type of

power source indicated on the label.

If you are not sure of the type of power supply at your home,

consult your appliance dealer or local power company.

A CAMCORDER is intended to be operated from battery power,

or other sources, refer to the operating instructions.

11. GROUNDING OR POLARIZATION:

This CAMCORDER may be equipped with either a polarized

2-wire AC line plug (a plug having one blade wider than the other)

or a 3-wire grounding type plug, a plug having a third (grounding)

pin.

If you are unable to insert the plug fully into the outlet, try reversing

the plug. If the plug still fails to fit, contact your electrician to

replace your outlet. Do not defeat the safety purpose of the

polarized plug.

12. POWER-CORD PROTECTION:

Power-supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them,

paying particular attention to cords or plugs, convenient

receptacles, and the point where they exit from the unit.

13. OUTDOOR ANTENNA GROUNDING:

If an outside antenna or cable system is connected to the

CAMCORDER, be sure the antenna or cable system is grounded

to provide some protection against voltage surges and built-up

static charges, Section 810 of the National Electrical Code,

ANSI/NFPA No. 70-1984, provides information with respect to

proper grounding of the mast and supporting structure, grounding

of the lead-in wire and supporting structure, grounding of the mast

and supporting structure, grounding of the lead-in wire to an

antenna discharge unit, size of grounding to conductors, location

of antenna-discharge unit, connection to grounding electrodes

and requirements for the grounding electrode.

See figure below.

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

GROUND

CLAMP

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

00792B SCD903 USA-SAFETY 5/14/04 10:44 AM Page 101

ENGLISH

Notices and Safety Instructions

14. LIGHTNING:

For added protection of this CAMCORDER during a lightning

storm or when it is left unattended and unused for long periods of

time, unplug it from the wall outlet and disconnect the antenna or

cable system.

This will prevent damage to the CAMCORDER due to lightning

and power-line surges.

15. POWER LINES:

An outside antenna system should not be located in the vicinity of

overhead power lines or other electric light or power circuits where

it can fall into such power lines or circuits. When installing an

outside antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact with them

might be fatal.

16. OVERLOADING:

Do not overload wall outlets and extension cords as this can result

in a risk of fire or electric shock.

17. OBJECTS AND LIQUIDS:

Never push objects of any kind into this CAMCORDER through

openings as they may touch dangerous voltage points or short out

a part that could result in a fire or electric shock.

Never spill liquids of any kind onto the CAMCORDER. Should

spillage occur, unplug unit and have it checked by a technician

before use.

18. SERVICING:

Do not attempt to service this CAMCORDER yourself. Opening or

removing covers may expose you to dangerous voltage or other

hazards.

Refer all servicing to qualified service personnel.

19. DAMAGE REQUIRING SERVICE:

Unplug this CAMCORDER from the wall outlet and refer servicing

to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If any liquid has been spilled onto, or objects have fallen into

the CAMCORDER.

c. If the CAMCORDER has been exposed to rain or water.

d. If the CAMCORDER does not operate normally by following the

operating instructions, adjust only those controls that are

covered by the operating instructions. Improper adjustment of

other controls may result in damage and will

often require extensive work by a qualified technician to restore

the CAMCORDER to its normal operation.

e. If the CAMCORDER has been dropped or the cabinet has been

damaged.

f. When the CAMCORDER exhibits a distinct change in

performance, this indicates a need for service.

20. REPLACEMENT PARTS:

When replacement parts are required, be sure the service

technician has used replacement parts specified by the

manufacturer and having the same characteristics as the original

part.

Unauthorized substitutions may result in fire, electric shock or

other hazards.

21. SAFETY CHECK:

Upon completion of any service or repairs to this CAMCORDER,

ask the service technician to perform safety checks to determine

that the CAMCORDER is in safe operating order.

00792B SCD903 USA-SAFETY 5/14/04 10:44 AM Page 102

ENGLISH

Notices and Safety Instructions

22. To prevent damage which may result in fire or shock hazard,

do not expose this appliance to rain or moisture.

23. If this power supply is used at 240V ac, a suitable plug adapter

should be used.

NOTE TO CATV SYSTEM INSTALLER:

This reminder is provided to call the CATV system installer’s attention

to Article 820-40 of the NEC that provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be

connected to the grounding system of the building as close to the point

of cable entry as practical.

USER INSTALLER CAUTION:

Your authority to operate this FCC certified equipment could be voided

if you make changes or modifications not expressly approved by this

party responsible for compliance to part 15 FCC rules.

NOTE:

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help

and for additional suggestions.

The user may find the following booklet prepared by the Federal

Communications Commission helpful : “How to Identify and

Resolve Radio-TV Interference Problems.”

This Booklet is available from the U.S. Government Printing

Office, Washington, D.C. 20402, Stock No. 004-000-00345-4.

FCC Warning

The user is cautioned that changes or modifications not expressly

approved by the manufacturer could void the user’s authority to

operate the equipment.

FCC ID : A3L04OMEGA2

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions;

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received,

including interference that may cause undesired operation.

Hg LAMP(S) INSIDE THIS PRODUCT CONTAIN

MERCURY AND MUST BE RECYCLED OR

DISPOSED OF ACCORDING

TO LOCAL, STATE OR FEDERAL LAWS For details

see lamprecycle.org, eiae.org, or call 1-800-Samsung

00792B SCD903 USA-SAFETY 5/14/04 10:44 AM Page 103

ENGLISH

Contents

ENGLISH

BASIC Recording ...................................................................................................................................................28

Preparation............................................................................................................................................................20

Notes and Safety Instructions ................................................................................................................................ 6

Getting to Know Your Camcorder ....................................................................................................................... 11

00792B SCD903 USA (01~27) 5/14/04 10:44 AM Page 2

Advanced Recording ........................................................................................................................................... 36

Contents

ENGLISH

00792B SCD903 USA (01~27) 5/14/04 10:44 AM Page 3

ENGLISH

Contents

Playback ...............................................................................................................................................................71

IEEE 1394 Data Transfer ...................................................................................................................................... 76

USB interface ..................................................................................................................................................... 78

Digital Still Camera mode .................................................................................................................................... 81

00792B SCD903 USA (01~27) 5/14/04 10:44 AM Page 4

Contents

ENGLISH

Maintenance....................................................................................................................................................... 100

Troubleshooting.................................................................................................................................................. 103

Specifications ..................................................................................................................................................... 106

INDEX ................................................................................................................................................................ 107

Warranty(SEA users only) ................................................................................................................................... 109

00792B SCD903 USA (01~27) 5/14/04 10:44 AM Page 5

ENGLISH

Notes and Safety Instructions

ENGLISH

Notes regarding the rotation of the LCD screen

■

LCD

open knob

00792B SCD903 USA (01~27) 5/14/04 10:44 AM Page 6

Autres manuels pour SC-D903

Table des matières

Autres manuels Samsung caméscope

Samsung

Samsung SC-D353 Manuel du propriétaire

Samsung

Samsung SCD34 Manuel utilisateur

Samsung

Samsung SMX-F30(0)/F33(2)/F34(0)BP Manuel utilisateur

Samsung

Samsung VP-L650 Manuel utilisateur

Samsung

Samsung HMX-U20BN Guide de l'utilisateur

Samsung

Samsung HMX-Q10BN Manuel utilisateur

Samsung

Samsung DC173(U) Manuel du propriétaire

Samsung

Samsung VP-D451I Manuel du propriétaire

Samsung

Samsung HMX-H400BN Manuel utilisateur

Samsung

Samsung VP-D30 Manuel du propriétaire

Samsung

Samsung SCW61/W62 Guide de configuration

Samsung

Samsung SCW61 Guide de configuration

Samsung

Samsung SC-L901 Manuel du propriétaire

Samsung

Samsung VP-D371W(i) Manuel du propriétaire

Samsung

Samsung VP-X205L Manuel du propriétaire

Samsung

Samsung VP-L900 Guide d'installation

Samsung

Samsung SMX K40 - Up-scaling HDMI Camcorder Manuel utilisateur

Samsung

Samsung HMX-M20BN Guide de démarrage rapide

Samsung

Samsung VP-M102 Manuel du propriétaire

Samsung

Samsung VM-C890 Manuel de la liste des pièces

Samsung

Samsung SMX-F33BN Manuel utilisateur

Samsung

Samsung HMX-H300BN Manuel utilisateur

Samsung

Samsung SCA20 Manuel utilisateur

Samsung

Samsung SMX C10 - Camcorder - 680 KP Manuel utilisateur

Manuels caméscope populaires d'autres marques

Toshiba

Toshiba CAMILEO Z100 Manuel utilisateur

Panasonic

Panasonic NV-VS40B Manuel utilisateur

Canon

Canon RC 260 Manuel utilisateur

Sony

Sony Handycam DCR-DVD7E Manuel utilisateur

Brinno

Brinno TimeLapse TLC200 Manuel utilisateur

JVC

JVC GR-SXM68AC Guide de démarrage rapide

Panasonic

Panasonic AG-HMC152EN Manuel utilisateur

Insignia

Insignia NS-DCC5HB09 - Camcorder - 720p Manuel utilisateur

MYDLINK

MYDLINK DCS-6100LH Manuel utilisateur

Sony

Sony video Hi8 Handycam CCD-TR555 Manuel utilisateur

SECURECOM

SECURECOM V-5014B Manuel utilisateur

Panasonic

Panasonic HDC-SD100 Manuel utilisateur

Sharper Image

Sharper Image U-VIDEO Manuel utilisateur

JVC

JVC AA-V15EG Manuel utilisateur

Canon

Canon LEGRIA HV40 Manuel utilisateur

Sony

Sony Handycam DCR-VX2000 Manuel utilisateur

RCA

RCA CC616 Manuel utilisateur

Panasonic

Panasonic NVM40 Manuel utilisateur