Samsung BrilliantVIEW SEW-3041W Manuel utilisateur

· Overview

Getting to know your Monitoring system

Wireless Monitor

After opening the box, fully charge the monitor before use. After initial charge, recharge as needed.

Front Controls

Navigation Controls / Button

Viewing Mode: The following controls are used while watching live video from the camera:

• Press the [$] or [%] button to adjust camera’s framing upwards or downwards.

• Press the [_] or [+] button to adjust camera’s framing to the left or right.

• Press [ ] button to turn on/off the night light.

• While in zooming, use [$/%/_/+] button to move the screen around.

Menu Mode: Use the [$/%/_/+] button arrows to navigate in Menu Mode.

Press the [ ] button to confirm the menu selection.

oVerVIeW

Power LED

Indicator turns green when powered.

When battery is charging, this LED will in green color.

4.3” LCD Screen

Displays video from the camera.

Sound Level LEDs

Flashes when sound is detected.

MENU Button

Press to access from video monitor mode to menu

mode operation. In menu mode, press this button will go

back to monitor mode with save from selection.

SLEEP Button

Used to turn on / off the screen by press this button.

User can turn on the video again by pressing any buttons.

If camera is disconnected, monitor screen would be

turned on automatically in Sleep mode.

Monitor

Antenna

Receives and sends signals from

orto

the

camera.

Micr

ophone

When there are pairing between monitor and camera,

There is a function of transmission of

audio

only.

Navigation Controls

oK/Night light

Button

Used

navigate while in Menu

Mode.

Used for PTZ operation and Night Light while

Viewing

Mode.

English ·

04 Overview

Back Controls

`You must have more than one camera configured on the system when using the functions that requires more than one camera.

Side Controls

TALK Button

Press down and hold the button to talk back to the camera.

Speaker

Produces the sound transmitted from the camera(s).

Kick Stand

Use to hold the monitor onto a table.

- ON

- VOX

- OFF

TALK

DC 6V Power Input

Connect the included AC power adapter to power and/or

charge the monitor battery.

(when the monitor is not placed in the optional Charge cradle).

Volume +/– Button

Used for adjusting the volume up/down.

Power and VOX ON / OFF Slide Switch

Set this switch to ON or OFF to turn on/off the wireless monitor,

and set to VOX to turn on the VOX mode.

· Overview

Wireless Camera

Front & Back Controls

`Remotely control Night Light ON or OFF is available only when the camera is paired to the monitor.

Side & Bottom Controls

PAIR Button

Press this button to pair with a monitor.

Power Slide Switch

Turns the camera ON or OFF.

Night vision sensor

Detects light levels where the camera is placed.

IR LEDs

Infrared LED’s provide viewing in no / low light

conditions.

Microphone

Receives sounds for the area near the camera, and

transmits sound from the camera to the monitor.

Speaker

Produces the sound transmitted from the monitor.

Night Light Button

Turns Night Light ON or OFF.

When the camera is powered on, Night Light would be

automatically turned on.

Camera Antenna

Sends & receives signals to or from the monitor.

DC 6V Power Input

Connect the adapter to the camera.

English ·

Installation

How to Install

CAUTION: If you use the system to watch a young child, do not place the camera in the

child's reach.

Wireless Monitor

1. Place the monitor in a place that will have clear

reception with your camera(s).

2. Pull out the stand.

`Do not pull up the stand lever with an excessive

force.

Wireless Camera

Before you install the camera, carefully plan where and how it will be positioned, and

where you will route the cable that connects the camera to the power adapter.

Before starting permanent installation, verify its performance by observing the image

on the monitor when camera is positioned in the same location/position where it will be

permanently installed and the monitor is placed in the location where it will be used

most of the time.

Installation Warnings

Aim the camera(s) to best optimize the viewing area: Select a location for the camera

that provides a clear view of the area you want to monitor, which is free from dust, and

is not in line-of-sight to a strong light source or direct sunlight.

Avoid installing the camera where there are thick walls or obstructions between the

camera and the monitor.

STRANGULATION HAZARD - Keep cord out of child's reach. NEVER place camera or

cords within 3 feet of crib or playpen. Never use extension cords with AC Adapters.

Only use the AC Adapters provided.

1. Carefully unpack the camera.

If you are installing cameras that did not come with the system, please see the

pairing camera section of this manual for details on installation.

2. Mount the camera to the wall.

Mark the position of the screw hole on the wall, and

drill hole and insert 1 screw, then firmly attach the

camera to the wall by placing the stand over the

installed screw and pushing the base downwards.

`To install on a concrete wall, drill a hole and use plastic

anchor to fix.

`Use the drilling template to drill holes on the wall for

camera installation. (Page 17)

`The camera can also be placed on a flat surface, such as a table or shelf, and no

mounting hardware is required.

3. Adjust the viewing angle of the camera.

Use the Pan, tilt control from the monitor to adjust the

viewing angle of the camera.

`Adjusting the camera with excessive force may

damage the unit.

InstallatIon

· Appendix

Specications

Item Details

System General

Operating Frequency Range 2400 MHz~2483.5 MHz

Transmitting Power 17dBm Max

Monitor Sensitivity -88dBm

Type of Spread Spectrum TX FHSS

Type of Modulation GFSK

Data Rate 3Mbps

Transmission range Max 300m

Weight Gross weight: 1052g

Wireless Camera

Image Sensor Type 1/5” Color CMOS Image Sensor

Effective Pixel H: 640, V: 480

White Balance Auto

Lens EFL=3.0mm, F=2.5

Viewing Angle (Diagonal) 56 degree

IR LED Type/ Night Vision 8pcs IR LED – 940nm / 5m

Loud Speaker Output 80dBA

Power Requirement DC 6V ± 10%

Power Consumption 480mA Condition Night vision mode, motor in motion and talk back

VOX level detection High: 50dBA / Low: 60dBA

Operating Temperature Range 0°C~+40°C

Operating Humidity Range 85% RH

Environment Rating Indoor use only

Item Details

Wireless Camera

Pan Angle 300°

Tilt Angle 110°

Regulation Compliance FCC/CE

RoHS Compliance Yes for CE version only

Audio Built in Microphone/ Speaker

Weight 218g

Wireless Monitor

Display Type/Size Color TFT 4.3”

Resolution (Pixel) 480X272 (RGB)

Viewing Angle H: 80 degree, V: 100 degree

Number of Camera Support Up to 4 cameras

Power Requirement Adapter : DC 6V ± 10%, Battery : 3.7V Li-polymer

Loud Speaker Output 80dBA

Power Consumption

480mA maximum Condition Charging + Speaker with voice at volume 5

Operating Temperature Range 0°C~+40°C

Operating Humidity Range 85% RH

Environment Rating Indoor use only

Regulation Compliance FCC/CE

RoHS Compliance Yes for CE version only

Audio Built in Microphone/ Speaker

Other Special Feature Volume control, Pairing

Battery Type Li-on

Battery Capacity 1300mAh

Weight 186g

appendIx

English ·

Appendix

Troubleshooting

Problem Solution

No picture from a

camera

1. Check all connections to the camera. Make sure the adapter is plugged in.

2. Make sure that the cameras and monitor are both ON.

3. Make sure that the camera is in range of the monitor.

4. Make sure the camera and monitor are paired.

5. Adjust the monitor antenna to vertical position.

The picture is or has

become choppy

The picture may become choppy when experiencing a lower frame rate

(i.e. 10 frames per second vs. a higher 20 frames per second).

1. Try moving the camera closer to the monitor.

2. Remove obstructions between the monitor and camera.

3. Adjust the monitor antenna to vertical position.

No sounds (even with

both units turned on)

1. Make sure that the power adapter is connected to the camera.

2. The battery on the monitor may be dead, be sure to charge it using the

adapter included.

3. The monitor may be out of range of the camera; be sure to check if the

Range LED in on continuously.

Your BrilliantVIEW

is emitting an high

pitched noise/

feedback.

This sound is normal feedback which occurs if the monitor and camera are too

close together. Move them further apart.

`Low batteries will cause the supply current to become unstable and will affect the quality

of the video/audio. Please charge the battery fully for use for superior video.

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection

systems)

This marking on the product, accessories or literature indicates that the product and

its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of

with other household waste at the end of their working life. To prevent possible harm

to the environment or human health from uncontrolled waste disposal, please separate

these items from other types of waste and recycle them responsibly to promote the

sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product,

or their local government office, for details of where and how they can take these items

for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the

purchase contract. This product and its electronic accessories should not be mixed with

other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery

return systems.)

This marking on the battery, manual or packaging indicates that the batteries in this

product should not be disposed of with other household waste at the end of their working

life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains

mercury, cadmium or lead above the reference levels in EC Directive 2006/66. If batteries

are not properly disposed of, these substances can cause harm to human health or the

environment.

To protect natural resources and to promote material reuse, please separate batteries from

other types of waste and recycle them through your local, free battery return system.

Samsung Techwin cares for the environment at all product manufacturing stages, and is

taking measures to provide customers with more environmentally friendly products.

The Eco mark represents Samsung Techwin’s devotion to creating environmentally friendly

products, and indicates that the product satisfies the EU RoHS Directive.

This template is used to install

the camera on the wall.

TEMPLATE

CAMERA FRONT

Screw holes for

the Camera

installation

SALES NETWORK

SAMSUNG TECHWIN CO., LTD.

Samsung Techwin R&D Center, 6, Pangyo-ro 319beon-gil, Bundang-gu, Songnam-si, Gyeonggi-do 463-400, Korea

TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745

SAMSUNG TECHWIN AMERICA Inc.

100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660

Toll Free : 1-877-349-3149

www.samsungsv.com

SAMSUNG TECHWIN EUROPE LTD.

Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey,

Surrey, UNITED KINGDOM KT16 OPS

TEL : +44-1932-45-5300 FAX : +44-1932-45-5325



Autres manuels pour BrilliantVIEW SEW-3041W

Table des matières

Autres manuels Samsung Babyphone

Samsung

Samsung SmartCam SNH-1010N Manuel utilisateur

Samsung

Samsung Techwin SafeVIEW Babyview SEW-3037P Manuel utilisateur

Samsung

Samsung SmartCam SNH-1010N Manuel utilisateur

Samsung

Samsung BabyVIEW SEW-3036W Manuel utilisateur

Samsung

Samsung SecureVIEW Manuel utilisateur

Samsung

Samsung SEW-3035WN Manuel utilisateur

Samsung

Samsung BrightVIEW Manuel utilisateur

Samsung

Samsung SimpleVIEW SEW-3040W Manuel utilisateur

Samsung

Samsung Wisenet SEP-5001RD Manuel utilisateur

Samsung

Samsung SEW-2002W Manuel utilisateur

Samsung

Samsung SEW3040 Manuel utilisateur

Samsung

Samsung SEB-1019RW Manuel utilisateur

Samsung

Samsung Techwin SEW3040W Manuel utilisateur

Samsung

Samsung BabyView SEW-3057W Manuel utilisateur

Samsung

Samsung SEW-3043W Manuel utilisateur

Samsung

Samsung BrilliantVIEW SEW-3041W/EX Manuel utilisateur

Samsung

Samsung EzVIEW SEW-3022 Manuel utilisateur

Samsung

Samsung CMD6638 Manuel utilisateur

Samsung

Samsung Techwin BabyVIEW SEW-3036P Manuel utilisateur

Samsung

Samsung SimpleVIEW SEW-3040W Manuel utilisateur

Samsung

Samsung SEW-3037W Manuel utilisateur

Samsung

Samsung RemoteVIEW SEW-3020 Manuel utilisateur

Samsung

Samsung SEW-3022WN Manuel utilisateur

Samsung

Samsung WISENET SNH-V6410PN Manuel utilisateur

Manuels Babyphone populaires d'autres marques

Motorola

Motorola MBP15 Manuel utilisateur

Philips

Philips SCD 469 Manuel utilisateur

Oricom

Oricom Babysense 7 Manuel utilisateur

Levana

Levana TW502 Manuel utilisateur

Luvion

Luvion Essential Manuel utilisateur

Philips

Philips AVENT SCD841 Manuel utilisateur

NUK

NUK Eco Control Video Display 550VD Manuel utilisateur

Lorex

Lorex sweet peek mini Manuel utilisateur

Mondevices

Mondevices MonBaby 2 Manuel utilisateur

Famidoc

Famidoc FDBB-V2 Manuel utilisateur

Graco

Graco iMonitor 2797 Manuel utilisateur

babymoov

babymoov High Care A014001 Manuel utilisateur

Ramili

Ramili RV1000 Manuel utilisateur

Philips

Philips SBC SC364 Manuel utilisateur

Swann

Swann SW231-FLO Manuel utilisateur

Badabulle

Badabulle Baby Online 300 m+ Manuel utilisateur

Philips AVENT

Philips AVENT SCD526/00 Manuel utilisateur

Uniden

Uniden Guardian UBR223 Manuel utilisateur