Samsung MIM-B16N Manuel utilisateur

PIM(Pulse Input Module)

MIM-B16N

Air Conditioner

installation manual

imagine the possibilities

Thank you for purchasing this Samsung product.

MIM-B16N_PIM_IM_DB68-04502A-03_EN.indd 1 2016-10-19 오후 3:19:22

Contents

Before installation

Safety Precautions ..........................................................................................................3

Accessories .................................................................................................................4

Viewing the Parts ...........................................................................................................5

PIM System Architecture ....................................................................................................8

Installing the product

Installing the PIM ...........................................................................................................9

Setting the PIM ...........................................................................................................15

PIM Menu Description.....................................................................................................16

English-2

MIM-B16N_PIM_IM_DB68-04502A-03_EN.indd 2 2016-10-19 오후 3:19:22

Safety Precautions

This installation manual describes how to install the PIM. For installation of other optional accessories, refer to the appropriate

installation manual.

WARNING Hazards or unsafe practices that may result in severe personal injury or death.

CAUTION Hazards or unsafe practices that may result in minor personal injury or property damage.

WARNING

 Read carefully this installation manual before installation and check if the PIM is installed correctly after installation.

 Do not attempt to install or repair this PIM by yourself.

 This PIM contains no user-serviceable parts.

Always consult authorized service personnel for repairs.

 When moving, consult authorized service personnel for disconnection and installation of the PIM.

 Ensure that the wall is strong enough to support the weight of the PIM.

 Must install the PIM with rated power supply.

 The PIM must be installed according to the national electrical rules by an installation specialist.

 If you wish to uninstall the PIM, consult an authorized installation center.

CAUTION

 Do not use inammable gases near the PIM.

 Do not install the PIM in a location where it will come into contact with combustible gases, machine oil, sulphide gas, etc.

 Avoid locations where acid/alkali solution or special spray is used.

 Choose a location that is dry and sunny, but not exposed to direct sunlight. Suitable temperature is between 0°C(32°F)

and 39°C(102.2°F).

 Do not spill water into the PIM.

 Do not apply tensile strength to the cable to avoid cable damage.

 Do not press the buttons with a sharp object.

 Do not connect the power cable to the control terminal.

 If the PIM is installed in a hospital or other special places, it should not aect other electronic devices.

English-3

BEFORE INSTALLATION01

Before installation

MIM-B16N_PIM_IM_DB68-04502A-03_EN.indd 3 2016-10-19 오후 3:19:22

Accessories

Make sure you have each item. Supplied items may vary depending on your country or service provider.

The type and quantity may dier depending on the specications.

Item PIM Adapter Power cable M4x16 Screw Installation

manual Cable tie

Quantity 1 1 1 6 1 1

Shape

• The PIM must be installed by a trained installer.

• Ensure the main power is turned o before installing the PIM.

• Be sure to use adapter and power cable we provide.

• The power cable and the communication cable must be installed according to the national electrical wiring

regulations. (Use 2C x 0.75mm2communication cable.)

CAUTION

English-4

MIM-B16N_PIM_IM_DB68-04502A-03_EN.indd 4 2016-10-19 오후 3:19:22

Viewing the Parts

Main Parts

PIM Exterior

LCD Display

Shows current time and consumption

by channel.

Various menus will be displayed

depending on button input.

LCD Operation button

There are 4 buttons [Menu, (Down), (Up), Set]

and you can access, move and check the menu.

LED Indicator

Checks the status using 14 LEDs such as Power,

COM1 TX/RX, Signal, COM2 TX/RX and Check.

PIM Bottom cover

Unfasten 2 screws on the bottom and

separate the bottom cover from PIM. Then

check cable connection part.

Explanation of LED Indicator

Item Name Status

Power Power indicator Turns blue when the power is supplied.

COM1 TX/RX Data transmission/reception with DMS

indicator

Blinks in orange during the normal transmission/

reception.

Signal (1)~(8) Input pulse indicator Blinks in orange when a normal pulse is input from

the meter.

COM2 TX/RX Reserved Reserved

Check Error indicator Blinks in orange when the error occurs. (It will be o

when the error is cleared.)

English-5

BEFORE INSTALLATION01

MIM-B16N_PIM_IM_DB68-04502A-03_EN.indd 5 2016-10-19 오후 3:19:22

Viewing the Parts

PIM Cable Connection Part

Cable groove

Power terminal

Reset button

Pulse input terminal

(Channel 1~4)

RS485 communication terminal

(COM1, COM2)

Pulse input terminal

(Channel 5~8)

Name Description

Pulse input terminal

(CH1~CH8)

Terminal that the pulse from Meter is inputted

(Channel1~Channel8)

Dry contact must be connected.

Power terminal Terminal to connect PIM adapter

Reset button Button used to reset PIM

RS485 Communication terminal COM1: Connection terminal for RS485 communication with DMS

COM2 : Not in use (It will be used for MODBUS in the future)

Cable groove Groove for arranging cables

English-6

MIM-B16N_PIM_IM_DB68-04502A-03_EN.indd 6 2016-10-19 오후 3:19:23

PIM Interior

LED Display board

40-pin cable

20-pin cable

Main board

Sub board

Product Dimensions

240

255

64.8 (Unit : mm)

English-7

BEFORE INSTALLATION01

MIM-B16N_PIM_IM_DB68-04502A-03_EN.indd 7 2016-10-19 오후 3:19:24

PIM System Architecture

DMS

PIM

Meter

(max. 8 units)

ROOM 0 ROOM 1 ROOM 2

Outdoor Unit

Pulse input

 Maximum 8 PIM units can be connected to DMS.

 Maximum 8 meter(Power/Gas/Water) can be connected to PIM.

English-8

MIM-B16N_PIM_IM_DB68-04502A-03_EN.indd 8 2016-10-19 오후 3:19:24

Installing the PIM

Installing the PIM on the Wall

1. Separate the installation plate on the rear side of PIM.

2. Fix the installation plate on the wall using 4 screws.

3. Hang the PIM on the groove which is on the top of the installation plate.

Installation

plate

4. Open the bottom cover and x the installation plate and PIM using 2 screws.

- Depending on the installation environment, open the top cover and x PIM

using assistant holes. (Screws for assistant hole are not provided.)

Assistant hole

5. If you install PIM inside of the wall or wiring from the rear side is needed, use

wiring groove on the bottom of PIM.

Wiring groove

• To prevent breakdown and damage of PIM and for safe usage, it is recommended to install PIM on the wall.

CAUTION

English-9

INSTALLING THE PRODUCT02

Installing the product

MIM-B16N_PIM_IM_DB68-04502A-03_EN.indd 9 2016-10-19 오후 3:19:25

Installing the PIM

Connecting a Meter, PIM and DMS

Connecting a Meter and PIM

1. Unfasten the 2 screws on the bottom of the PIM front cover. Hold the bottom

2sides of the PIM and push downwards to slide open the cover.

2. Connect the adapter to the power terminal.

- Arrange the adapter as shown in the gure.

Adapter

3. Connect PIM and a Meter as many as you want. In this step, use communication

cable and 8 terminal blocks which are attached to the pulse input terminal of

PIM.

- For the communication cable connection instruction of a Meter or additional

setting instruction, refer to the installation manual of a Meter.

- Connect the communication cable considering the polarity. [Left:(+), Right:(-)]

Connect

communication

cable

Meter

(+) (-)

• Maximum 8 meter(Power/Gas/Water) can be connected to 1 PIM.

• Use 2Cx0.75mm2communication cable.

CAUTION

English-10

MIM-B16N_PIM_IM_DB68-04502A-03_EN.indd 10 2016-10-19 오후 3:19:25

Table des matières

Autres manuels Samsung Climatiseur

Samsung

Samsung AQV12NSA Manuel utilisateur

Samsung

Samsung AQ18FA Series Manuel utilisateur

Samsung

Samsung MXD-14K Series Manuel utilisateur

Samsung

Samsung AQV09YWAN Mode d’emploi

Samsung

Samsung AQV18FA Manuel utilisateur

Samsung

Samsung MH026FEEA Manuel utilisateur

Samsung

Samsung CH070EAMC Manuel utilisateur

Samsung

Samsung AC BNPDBC Series Mode d’emploi

Samsung

Samsung AQV09EWAN Manuel utilisateur

Samsung

Samsung AG026MN1DEH/EU Manuel utilisateur

Samsung

Samsung CH070CAV1 Manuel utilisateur

Samsung

Samsung AS09E Series Mode d’emploi

Samsung

Samsung AW07LFABA Manuel utilisateur

Samsung

Samsung AWT18SBWDA Manuel utilisateur

Samsung

Samsung DVM PLUS III Manuel d'instructions

Samsung

Samsung AQ09AWAN Manuel utilisateur

Samsung

Samsung AR07BSFCMWKNCV Manuel utilisateur

Samsung

Samsung AZ18A1WE Manuel utilisateur

Samsung

Samsung AC TNCDKC Series Manuel utilisateur

Samsung

Samsung AMF12C2B/XAP Manuel utilisateur

Samsung

Samsung DH140CAV Manuel utilisateur

Samsung

Samsung AQV18VBE Manuel utilisateur

Samsung

Samsung AR-KP/JP Series Mode d’emploi

Samsung

Samsung AC BNADCH Series Manuel utilisateur

Manuels Climatiseur populaires d'autres marques

Spheros

Spheros CC 355 Manuel utilisateur

Bosch

Bosch Climate 5000 SCI 24 CAS/ OU- OUE Manuel utilisateur

Panasonic

Panasonic CS-E12HKEW Manuel utilisateur

nedis

nedis ACMB1WT7 Manuel utilisateur

Daikin

Daikin FCFV50A Manuel utilisateur

Fujitsu

Fujitsu Inverter ASBA30JFC Manuel utilisateur

Toshiba

Toshiba RAS-M10SMUV-E Manuel utilisateur

Daikin

Daikin FXLQ20MAVE Manuel utilisateur

Hitachi

Hitachi RAS-E24CAK Manuel utilisateur

CIAT

CIAT Magister 2 Series Mode d’emploi

Bestron

Bestron AAC6000 Manuel utilisateur

Hisense

Hisense 7K Manuel technique

Frigidaire

Frigidaire FFRE0533S1E0 Manuel utilisateur

Frigidaire

Frigidaire CRA073PU11 Manuel du propriétaire

Soleus Air

Soleus Air GB-PAC-08E4 Manuel utilisateur

McQuay

McQuay MCK020A Manuel utilisateur

Webasto

Webasto Frigo Top 25 DS Manuel utilisateur

Frigidaire

Frigidaire FAZ12ES2A Manuel utilisateur