Samotech SM301Z Manuel utilisateur
Description
The Passive Infrared Motion sensor uses infrared sensors to
detect human movements within the sensors range and sends
an alert to your phone when motion is detected.
The motion sensor works in both light and darkness, but it is not
pet immune. The SM301Z sensor can be used on its own or in
a combination with other compatible Zigbee devices. This
makes it possible to create different automation scenarios in the
Smart Life app and utilize available smart home functionalities.
Recommended placement is 2-3m above the ground. Detection
range is 5m with the front angle of 170֯. The sensor is for indoor
use only.
Prerequisite
SM310 Zigbee Gateway or any other compatible Zigbee hub
Setup
SM310 Zigbee Gateway
1. Ensure your mobile phone is connected to your home WIFI
network and the sensor is as close to the Zigbee Smart
Gateway as possible
2. Open Smart Life app and tap the Smart Zigbee Gateway
icon, now tap + Add subdevice button
3. Using the reset pin, press and hold the reset button at the
back of the sensor for 5 seconds until the pairing indicator
starts flashing red on the sensor, now tap the LED already
blink button in the app
4. The sensor should shortly be paired with the Gateway
What is included
SM301Z Motion sensor
Battery AAA x 3
Adhesives
Reset pin
Manual
Note: For any queries regarding using the Smart Life application use the Feedback option
Specification
Product
Motion Sensor
Model
SM301Z
Battery specifications
3 x AAA 1.5V
Operating temperature
0℃~+60℃
Operating humidity
10%-60%RH (no condensation)
Wireless type
Zigbee 3.0
Battery life
up to 3 years (≤10 triggers per day)
Table des matières
Autres manuels Samotech Capteur de sécurité
