No. 4 –Thin Slicer
Ideal for potato chips, carrot curls, coleslaw, or any other food to be thinly sliced.
•Radishes, carrots: Fill hopper with radishes
and feed carefully with nger tips. For carrot
curls, lay carrot at across cutting cone and
press rmly.
•Onions, pickles: For hamburgers or other
sandwiches where very thin slices are
desired. Best results are obtained if onion is
peeled, cut in half, and outside is placed next
to cutting cone.
•Sauerkraut, cole slaw: Cut cabbage into
halves or quarters and remove the core. To
create delicate, lacy shreds, cut the cabbage
with the leafy side toward the cone.
•Cucumber, squash, celery: Great for salads,
soups, and a variety of cooking needs.
No. 5 –Waer
For fancy waed cuts of fruits and vegetables.
This cone creates thicker cuts than the No. 4 – Thin Slicer.
•Potatoes: Do not peel. Simply cut and fry
to a golden brown. Sweet potatoes, which
must rst be peeled, are also excellent
when waed.
•Apples: Cut apple in half and remove core.
Slice, cook, and serve.
•Pickled beets: cook, slice, and then pickle.
Excellent for canning.
•Bananas: Fast and attractive slices for fruit
salads, desserts, or a delicious yogurt parfait.
•Carrots: No need to peel. Simply slice and
cook…or use in an attractive garden salad.
8
Cleaning
Before rst use and after each subsequent use, thoroughly clean the unit with
a damp, soapy cloth and rinse with warm water. To retain the mirror-like nish,
dry with a soft cloth. Similar to any high quality cutlery, dishwasher use is not
recommended as the harsh detergents can dull the cutting cones and the
overall nish of the unit.
To remove the hopper section for cleaning, hold the base securely and
lift hopper section up and to the left. It should slide o of the base. It is not
advisable to immerse the hopper portion of your Saladmaster® Machine in
water. Clean as directed above.
To clean food guide and suction cups simply wipe a damp, soapy cloth and
rinse with warm water.
Cutting cones are easily cleaned by holding them under warm running water
immediately after use. Do not leave cutting cones in water or stack them together
when wet. Leave them to drip-dry separately or dry them with a soft cloth.
CAUTION: As with any precision cutting instrument, the edges of the
cutting cones are very sharp. Use extreme care when handling.
5
•To vary the cut, you may place the food
firmly against the back edge of the food
guide, rather than placing it inside the
hopper. Place the food upright for short
cuts or at an angle for elongated cuts. To
ensure even cuts, apply constant, gentle,
downward pressure to the food while
turning the food cutter handle. (Figure E)
•To remove the food guide, first remove
the cutting cone from the food cutter.
Next, gently lift the front edge of the
guide frame and slide the food guide o
of the hopper. Be sure to slide it parallel
to the top edge of the hopper until it is
completely removed. DO NOT twist or
pull the food guide o of the food cutter.
•Thoroughly clean after each use.
CAUTION: When using the food cutter, be sure to keep ngers away from
the cutting edge. As with any precision cutting instrument, the edges of the
cutting cones are very sharp. Use extreme care while handling.
Figure D
Figure E
