Sakura Cyto-Tek 2500 Manuel utilisateur

Cytology

Cyto-Tek® 2500 Cytocentrifuge

Quick Reference Guide

Cyto-Tek® 2500 Cytocentrifuge

Sakura Finetek Europe B.V. | Flemingweg 10a, 2408 AV Alphen a/d Rijn | NL

Phone: +31 (0) 88 592 00 00 | Fax: +31 (0) 88 592 00 01 | sakura@sakura.eu | www.sakura.eu

Cyto-Tek®2500 Centrifuge

The Cyto-Tek®2500 Centrifuge is a self-contained

instrument designed to transfer cells from human

and/or animal suspension onto a glass slide by

cytocentrifugation.

The instrument, as part of the cyto-pathology

process, is intended to facilitate the in vitro

examination of human and animal material for cell

structure changes by a pathologist.

The user instructions for the Cytochambers can be

found in the operating manual and in the User

Guide V-1 Cytology chambers 1, 6 and 12 ml,

which can be found on the Distribitor area.

Cyto-Tek®2500 Cytocentrifuge

Components and Functions

1. Powerswitch:

Turns the instruments power on and off.

2. Control Panel:

Provides the controls and indicators to

display the instrument status.

3. Lid:

Is opened by pressing the blue button on

top of the lid and closed when the guard

bowl is placed onto the instrument. A lid

interlock mechanism is provided to prevent

access to the guard bowl during operation.

Cyto-Tek®2500 Cytocentrifuge

Cyto-Tek® 2500 Cytocentrifuge

Cytology

Quick Reference Guide

Cyto-Tek® 2500 Cytocentrifuge

page 2 | 4 QRG | Cytocentrifuge | V-1

4. Guard Bowl:

Accomodates the rotor. The guard bowl is

detachable, and has an own detachable lid.

5. Rotor:

Is a circular casing with compartments

where up to 12 specimen chambers can be

palced at one time. It also facilitates as a

stand when fluid samples are dispensed

into the specimen chambers.

6. Bowl Lid:

Securely seals the guard bowl, a lock

button is provided on top of the lid knob.

Locking the bowl lid by pushing down the

button and openend by pulling up.

Opening the Cyto-Tek®2500 Cytocentrifuge

Guard bowl including rotor

Detachable lid

Unlock guard bowl

Remove guard bowl

Control Panel

The controls and indicators to display the

instrument status ar listed.

1. START/STOP key:

Starts and stops the operation

2. SET key:

Let’s the operation mode switch to the

“Program Mode” and “Set & View Mode”.

3. (down-arrow) key:

Decreases a program number and a setting

value for speed or proces time.

4. (up-arrow) key:

Increases a program number and a setting

value for speed or proces time.

5. Program Number display:

Displays a program number from 1 to 30.

6. Speed Display:

Displays a program speed or actual speed.

7. Time display:

Displays a programmed time or process

time left.

8. Lid Lock indicator:

A LED lights up when the lid is locked at

the start of operation and goes out when

the lid is unlocked after the motor has

stopped.

9. Power indicator:

A LED lights up while the power is supplied

to the instrument.

Control Panel

Cytology

Cyto-Tek® 2500 Cytocentrifuge

Quick Reference Guide

Cyto-Tek® 2500 Cytocentrifuge

QRG | Cytocentrifuge | V-1 page 3 | 4

How to load the Guard Bowl

1. Use an even number of specimens chamber

assemblies. Arrange them in the rotor so

that pairs of specimen chamber holder

assemblies are opposite pairs.

Caution: Place equal size specimen chamber holders in opposite

positions.

2. If there are an odd number of specimen

samples to process, maintain the rotor

balance by adding one specimen chamber

filled with water to pair with the last

specimen.

3. If all twelve specimen holder positions in

the rotor are not filled, additional pairs of

water-filled speci-men chamber holder

assemblies may be added as necessary to

keep the rotor balanced.

Guard Bowl loading always in pairs

4. Make sure the cytochambers are placed in

the right position

Incorrectly set specimen chamber

Starting the operation

1. Place the guard bowl into the instrument

and close the lid.

2. Press the up or down arrow key until the

desired program number is obtained. If a

desired program does not exist, make

changes to create a new program.

Note: to create a program review the Setting Instructions in

the Operating Manual.

3. Press the START/STOP key to start the

operation. The instrument is locked during

operation.

Starting the operation

Cyto-Tek® 2500 Cytocentrifuge

Cytology

Quick Reference Guide

Cyto-Tek® 2500 Cytocentrifuge

page 4 | 4 QRG | Cytocentrifuge | V-1

Maintenance

More information in operating manual section

4: “Care of the instrument”

Daily

Control panel cleaning

1. Wipe the control panel with a clean cloth

moistened with neutral detergent.

Interior and exterior surfaces

1. Clean with a dry clean cloth or a cloth

moistened with ethylalcohol or isopropyl-

alcohol 70%-80%.

Caution: Do not use volatile fluids like xylene, thinner, benzene

Caution: Do not spray a disinfectant directly on or over the

instrument.

Monthly

Guard bowl and rotor cleaning

1. Disassemble the guard bowl unit.

2. Steralize the guard bowl body and

components in an autoclave for > 20

minutes at 121°C

When no autoclave is available:

1. Disassemble the guard bowl unit.

2. Soak guard bowl body and components in

an ethylalcohol or isopropylalcohol 70%-

80%.

3. or sodium hypochlorite 0.5% solution for at

20 minutes.

4. Wash with water and soap.

5. Rinse with clear water.

6. Dry thoroughly (when using an oven keep

temperature below 120°C).

Yearly

1. Replace the lid and top gasket.

2. Preventative maintenance by a Sakura

representative or a qualified service

engineer.

Control panel

Guard bowl & rotor and lid gaskets

Error handling

When a power outage occurs while the

instrument is in operation, the instrument lid

will remain locked. When the motor stopped

the lid can be opened mechanically.

1. Remove a small cap located on the left side

of the instrument.

2. Insert and push an unlock bar into the hole.

Remove a small cap

Insert an unlock bar

Autres manuels pour Cyto-Tek 2500

Autres manuels Sakura Équipement de laboratoire

Sakura

Sakura Tissue-Tek TEC 6 EM Option Manuel utilisateur

Sakura

Sakura Tissue-Tek Prisma Plus Prisma-P-AD Manuel utilisateur

Sakura

Sakura Tissue-Tek AutoTEC a120 Manuel utilisateur

Sakura

Sakura Tissue-Tek AutoTEC a120 Manuel utilisateur

Sakura

Sakura Tissue-Tek Glas g2 Manuel utilisateur

Sakura

Sakura Histo-Tek VP1 Manuel utilisateur

Sakura

Sakura Tissue-Tek Glas Manuel utilisateur

Sakura

Sakura Tissue-Tek Prisma Plus Manuel utilisateur

Sakura

Sakura Tissue-Tek Prisma Plus Manuel utilisateur

Sakura

Sakura Tissue-Tek Glas g2 Manuel utilisateur

Sakura

Sakura Tissue-Tek TEC 6 Mode d’emploi

Sakura

Sakura Cyto-Tek 2500 Manuel utilisateur

Sakura

Sakura Tissue-Tek DRS 2000 Manuel utilisateur

Sakura

Sakura Tissue-Tek Film Manuel utilisateur

Sakura

Sakura 6134 Manuel utilisateur

Sakura

Sakura Tissue-Tek Xpress x120 Manuel utilisateur

Manuels Équipement de laboratoire populaires d'autres marques

Qiagen

Qiagen DML 3000 Manuel utilisateur

Queensgate

Queensgate NANOSCAN OP400 Manuel de programmation

Conviron

Conviron GEN1000-GE Manuel utilisateur

Parr Instrument

Parr Instrument 4560 Mode d’emploi

IKA

IKA IC control Manuel utilisateur

Integra

Integra DOSE IT Manuel utilisateur

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manuel utilisateur

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manuel utilisateur

NI PXI-5422 Manuel

Collomix

Collomix Aqix Manuel utilisateur

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manuel utilisateur

Ocean Insight

Ocean Insight FLAME-NIR+ Manuel utilisateur

Parker

Parker ALIGN-MG-NA Manuel utilisateur

BD 644787 Manuel utilisateur

DENTAURUM

DENTAURUM Compact Megaplus Manuel utilisateur

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manuel utilisateur

VWR

VWR SAS Super IAQ Manuel utilisateur

illumina

illumina MiSeqDx Manuel utilisateur