Sakar 15490 Manuel utilisateur
2.4” Digital Photo Frame
Owner’s Manual
© 2007 Sakar International, Inc. All rights reserved.
Windows and the Windows logo are registered trade arks of Microsoft Corporation.
All other trade arks are the property of their respective co panies.
- 1 -
Table of Contents
Introduction ....................................................................................................3
What your Digital Photo Fra e includes: .......................................................3
Co puter Syste Require ents.....................................................................3
A Quick Look at Your Photo Fra e ................................................................4
Preparing Your Photo Fra e for Use..............................................................5
Software & Device Driver Installation ............................................................... 6
Send Photos to Fra e.....................................................................................9
Everything you need to get the ost of your photos and MORE...................17
Safely Re oving Your Photo Fra e Device ..............................................18
Installing a SD Me ory Card.........................................................................20
Attaching Stand to Digital Photo Fra e.........................................................21
Starting Your Digital Photo Fra e.................................................................22
Digital Photo Fra e Maintenance ...............................................................26
Technical Support..........................................................................................26
Sakar Warranty Card.....................................................................................26
Appendix A: Technical Specifications............................................................28
Appendix B: Troubleshooting........................................................................28
- 2 -
Introduction
Thank you for purchasing the Digital Photo Fra e. Please read this anual carefully FIRST in order to get
the ost out of your digital photo fra e.
What your Digital Photo Frame includes:
Photo Fra e
My Digital Brag Book Photags Express Software
USB cable
User’s Manual
Stand
AC adaptor
Computer System Requirements
To be able to upload photos fro your PC you will need the following ini u configuration:
Windows 2000/XP
Pentiu -based PC (or equivalent)
80 MB hard disk free space and 128 MB or ore RAM
Available USB Interface
CD-ROM Drive
Color display (16 bit or higher reco ended)
Screen resolution 1024 X 768
- 3 -
Quick Look at Your Photo Frame
- 4 -
Preparing Your Photo Frame for Use
Battery Installation
Your Photo Fra e requires four AAA alkaline batteries, which ust be inserted as follows:
1. Slide the battery co part ent open on the back of the photo fra e in the direction
indicated by the arrow.
2. Insert the batteries in accordance with the polarity (+/-) shown inside the co part ent.
3. Close the battery co part ent.
When the battery power is low, the LCD display will show the
red icon and flash. When a flashing “Low Battery”
essage appears the device will auto atically switch off after
15 seconds. You need to change the batteries in order to
continue using the Photo Fra e. You also can draw power
fro the power adaptor by USB cable.
Note: If you do not intend to use your Photo Frame
for an extended period, remove the batteries to avoid
leakage and corrosion.
Noted: The photo frame can not power off automatically
on Slide Show Mode/Clock Mode/System Set up.
- 5 -
Installing “My Digital Brag Book PhoTags Express” Software
Before atte pting to install the software, ake sure that you do not have the device or the USB
cable attached to your co puter. This ay cause your installation to fail. Do not connect the cable
to the co puter until the entire installation process has been co pleted. We suggest you follow the
step by step instructions that will appear on your screen during the installation process.
Software & Device Driver Installation
1. Insert the CD into your CD-ROM drive. Make sure that your device is not connected to the
co puter.
2. On the “Photo Fra e" screen that appears, click the “Next” button.
- 6 -
3. Please review the license ter s and click the “ gree” button to continue.
4. Let the installer create the folder where the progra will be installed to, and then click “Install”.
- 7 -
5. Click “Finish” to let the installer finish the installation progra .
- 8 -
6. This will auto atically launch the Install shield for the device driver. Click “Next” to continue.
7. Once the device driver has finished installing it is reco ended to restart your co puter.
Congratulations!! You have successfully installed the software and the Device driver.
Send Photos to Frame
In order to send photos fro your co puter to the Photo Fra e, you are required to connect the Digital
Photo Fra e to your co puter with the USB cable provided.
Note: 1. Please ake sure that your Digital Photo Fra e is connected to the co puter.
2. This kind of Photo Fra e can only support photo files in “JPEG” for at.
- 9 -
3. Your Digital Photo Fra e supports 128MB flash e ory to store photos. You can download photos
where the total capacity does not exceed 128MB.
After you have connected the USB cable, the LCD screen will show “Please don’t disconnect the USB
cable when the unit is working.” It indicates that your Digital Photo Fra e is connected and ready for
downloading. You cannot operate the Photo Fra e at this o ent.
1. Make sure that your Photo Fra e is turned on.
2. In Windows XP the following activation screens ay appear:
Select the “Yes, this ti e only” option and then click “Next”.
- 10 -
Table des matières
