Sailsky BL260Q Manuel utilisateur
Shenzhen Shuotian Information Technology Co.,LTD
1
User Manual
This is the user manual of 300Mbps Ceiling AP, which will approximate guide you how to set and apply the Ceiling AP,
it provide a convenient graphical interface for network construction and maintenance person, as well as a user through
a simple and accurate operation, and configuration management of the ceiling wireless access point.
Attention:
1. Check box contents:
Ceiling Wireless AP
Power adapter
LAN cable
User Manual
Setting Screws
2. Warning:
Shenzhen Shuotian Information Technology Co.,LTD
2
Contents
1st: Hardware and Operation mode Instruction……………........…………………….......……….4
LED indicator:………………………………………….......…………………………………….4
AP Interface:……………………………………………………….......…………………………4
Power Supply:…………………………………………………………….......………………….4
1. PoE Adapter Power Supply:…………………………………….......…………………...…..4
2. PoE Switch Power Supply…………………………...................................………............4
AP installation:....................................................................................................................5
2nd: Connect Wireless AP with PC:………………………………………………….......…..………5
3rd：Login………………………………………………………………………........……………..….6
4th : WEB GUI interface Setting:……………………........……………………………………….…9
1) Status……………………………………………….......…………………………………....9
2) Wizard Configuration:………………………………………………….......……………...11
1. Gateway Mode:………………………………………………………….....…………..12
2. WiFi Repeater mode…………………………………………………………….....….14
3. WISP Operation mode:…………………………………………………….....……....15
4. AP Operation mode:……………………………………………………………....…...17
3) Advanced Setting:…………………………………………………….…………...……….19
Device Status:……………………………………………………………………...……..19
Wireless Setting…………………………………………………………....……….........20
Virtual AP…………………………………………………………………………….........22
Access Control……………………………………………………………..……......…...23
Advanced Settings………………………………………………………………………..23
Network setting……………………………………………………………………………23
Management……………………………………………………………………………....24
5th Share Internet and Obtain IP address automatically…………………………….….…….....26
Trouble Shooting………………………………………………………………………………….…..27
Shenzhen Shuotian Information Technology Co.,LTD
3
1st Hardware and Operation mode Instruction
L ED i nd i ca t o r:
Gr e en : P ow er I nd i ca t or
Bl u e: W iF i In di c at o r
AP In t er f a ce :
RST: Reset Button, it make AP revert to default data after press it 15 seconds.
WAN: WAN Port, connect with ADSL modem or Internet mainly. It will be LAN port under Wireless AP and WiFi
Repeater operation mode
LAN: LAN Port to end users
LED: LED Indicator of WAN port and LAN port
DC: DC power connector
Power Supply:
1. PoE Adapter Power Supply:
The connection diagram showed as P1, internet cable connect to PoE adapter’s LAN Port, Ceiling AP’s WAN port
connect to PoE adapter’s PoE Port, then PC will access into ceiling AP through cable or wireless
The PD wireless AP support 48V IEEE 802.3af standard PoE, so PoE adapter should be 48V PoE standard.
P1
Shenzhen Shuotian Information Technology Co.,LTD
4
2. PoE Switch Power Supply
The connection diagram shows as P2, Internet cable from PoE Switch to Ceiling AP’s WAN Port, then PC access into
ceiling AP wired/wireless.
Pls note the PD wireless AP support 48V IEEE 802.3af standard PoE, the PoE switch should comply with 802.3af 48V
PoE standard.
P2
AP In s ta l l at i o n:
For the Ceiling Wireless AP, will be installed under ceiling based on following steps:
Shenzhen Shuotian Information Technology Co.,LTD
5
2nd : Connect Wireless AP with PC:
Use can co nn ec t the PC wi th wi rel es s AP by W ire le ss SSI D an d LAN ca ble:
T he d ia g r a m of wi r el e s s co n ne c t i o n sh o w e d as f o l l o w:
Pl s no te : the d efaul t SS ID is Wi r e l e s s 2. 4 G , S S I D ’s p a ss w o r d i s 66666666
T he d ia g r a m of L A N ca b l e c o nn e c t io n sh o w e d a s fo l l o w :
P3 Co nne ct io n wa y
3rd ：Login
1）Connect the Ceiling AP with computer by wired or wireless
2）The default IP address of this wireless AP is 192.168.188.253, Configure the PC’s local connection IP address as
192.168.188.X (X is number from 2 to 254), subnet mask is 255.255.255.0, follow P4 and P5 to finish.
P4 Setting of computer’s IP address
Shenzhen Shuotian Information Technology Co.,LTD
6
P 5 Setting of computer’s IP address
3) Input 192.168.0.254 into IE browser, then pop up the login page, the default login password: admin, then login,
pls do following P6
P6 Login
Shenzhen Shuotian Information Technology Co.,LTD
7
4) After login, then P7 Device Status will be showed;
This page will show the Wireless AP’s default operation mode, channel, connection status, CPU usage, Wireless
settings, LAN Setting, Wireless AP’s Location, hardware/firmware version.
P7: Device Status
4th : WEB GUI interface Setting:
1) Status
After login, then P8 Device Status and home page will be showed:
P8: Device Status
Shenzhen Shuotian Information Technology Co.,LTD
8
In this page, show the AP’s default operation mode, channel, end user QTY, connection status, CPU usage status,
Wireless, LAN and AP location info.
Then in Wireless Setting, GUI configuration page showed as below:
User can configure the SSID, password, band width, channel here, then Apply to finish.
P9. Wireless setting
LAN Setting to configure the DHCP or Fix IP
P10 LAN Setting
Shenzhen Shuotian Information Technology Co.,LTD
9
AP location setting: can mark where the AP set up, and AP name as P11:
P11 AP Postion setting
2) Wizard Configuration:
Wizard: It instruct users to configure wireless AP’s operation mode based on needs: there are four operation mode
including gateway, repeater, WISP, Wireless AP. Please confirm the operation mode first before configuration starting.
Click Wizard in Status page, will pop up following page to configure the operation mode and there are explanation for
each operation mode for better application.
P12 Operation mode
1. Gateway Mode:
Shenzhen Shuotian Information Technology Co.,LTD
10
Before Click Gateway mode, confirm your internet will be static IP, PPPoE, or DHCP:
Then will pop up following picture after click it, Please choose the right WAN setting mode, then click next to continue.
P13. WAN setting in Gateway Mode
P14 Wireless Setting in Gateway Mode
Please not: to make the AP in some clear channel, user can click wireless analyzer at first. Less AP in the channel,
then Wireless performance will be more stable. Picture showed as below:
Table des matières
Manuels Point d'accès sans fil populaires d'autres marques
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
Ubiquiti
Ubiquiti NanoStation NSM2 Manuel utilisateur
Cisco
Cisco Aironet 1550 Series Manuel utilisateur
Aruba
Aruba IAP-335 Manuel utilisateur
Advantek Networks
Advantek Networks AWN-AP-54MR Manuel utilisateur
IP-COM
IP-COM AP355 Manuel utilisateur
