Safe 4SF-4000B Manuel du propriétaire
Car lift installation, operation and maintenance manual Type：4SF-4000B
1
Type：4SF-4000B
●Electro-Hydraulic 4 post life for wheel alignment
●Pneumatic lock release
●Lifting capacity：4000Kg
INSTALLATION,OPERATION AND MAINTENANCE MANUAL
The instructions is part of the product. Please keep them where you can easily find them as reference.
Read the instructions carefully before starting installation, operation and maintenance.
The manufacturer and its distributor are not liable for any accidents caused by customer’s arbitrary modification of
the part or operation.
Car lift installation, operation and maintenance manual Type：4SF-4000B
2
INDEX
1.SAFETY INSTRUCTIONS..................................................................................................................................................
1.1 Statement
1.2 Qualified operator and instructions for use
1.3 Notes
1.4 Warning Signs
1.5 Noise standard
2.INTRODUCTION.................................................................................................................................................
2.1 Product description
2.2Technical parameter
2.3Main structure of the machine
3.INSTALLATION.................................................................................................................................................
3.1 Before installation
3.1.1 Tools and equipments needed
3.1.2 Ground requirement
3.1.3 Check accessories
3.2 Precautions during installation
3.3 Installation steps
3.4 Notes after installation
4.OPERATION.................................................................................................................................................
4.1 Operating instructions
4.2 Operation flow chart
4.3 Instructions for use
5.TROUBLE SHOOTING................................................................................................................................
6.MAINTENANCE............................................................................................................................................
7.ENCLOSURE.............................................................................................................................................................
Enclosure 1 Packing list
Enclosure 2 Overall diagram
Enclosure 3 Space required
Enclosure 4 Hydraulic diagram
Enclosure 5 Electrical diagram
Enclosure 6 Wiring diagram
Enclosure 7 Explosion diagram
Car lift installation, operation and maintenance manual Type：4SF-4000B
3
SAFETY INSTRUCTIONS
1.1 Statement
●We will give the user one-year warranty of quality for the machine. If something wrong with the machine within the term of service, we will
repair or replace the product according to the user’s demand. The manufacturer will not take any responsibility for improper installation and
operation, overload running, wrong concrete ground (that can not meet the requirements in the manual), normal mechanical abrasion and
insufficient maintenance.
●The lifting machine is designed for lifting vehicles and does not allow any other use. Neither the dealers nor we are liable for the accidents and
damage caused by the machines for other purposes..
●Be sure to pay attention to the tonnage mark on the machine and shall not attempt to lift the vehicle beyond the rated lifting weight.
●Please read the manual carefully before installation and operation of the lifting machine so as to avoid any loss of property or even personal
injury caused by improper operation.
●In the absence of the manufacturer's permission, no user may alter the control and other mechanical parts of the machine without permission.
1.2 Qualified operator and instructions for use
1.2.1 Professional trained personnel can operate the lift.
1.2.2 Electrical connections must be operated by personnel with electrical qualifications.
1.2.3 Laypeople shall not use lifting machines.
1.3 Notes
1.3.1 Do not install the lift on asphalt. The thickness of the concrete must meet the requirements.
1.3.2 Before you operate the lift, read and understand the instructions for safety operation carefully.
1.3.3 Customers do not have special needs customized, lifts are generally not used outdoors.
1.3.4 Hands and feet away from the lift’s moving parts, when the machine falling, remove the hands and feet, to avoid being hurt.
1.3.5 Professional trained personnel can operate the lift.
1.3.6 The operator is not allowed to wear fat clothing so as not to be caught in the moving parts during the lifting of the machine.
1.3.7 The lifting machine must be kept clean and tidy and should not be piled up so as not to cause accidents.
1.3.8 Work under the car, make sure the safety of the lift in occlusal state.
1.3.9 Check the parts for damage at any time, check the synchronism of the machine and the flexibility of the moving parts, and pay attention to
the regular maintenance. Once the abnormal situation is found, stop using and contact the dealer immediately.
1.3.10 Please lowest the machine after operation.
1.3.11The components of the lift shall not be altered without the manufacturer's permission.
1.3.12 If the machine is not used for a long time, the user needs
A.Cut-off power B.Emptying hydraulic fluid C.The moving parts are lubricated with hydraulic oil.
Car lift installation, operation and maintenance manual Type：4SF-4000B
4
Attention：
The parking car lift belongs to high-risk products, installation or improper operation, or modify the mechanical
components, are likely to cause injury or death of the operator, read the instructions carefully and strictly in
accordance with the requirements of work, and do not randomly discharge liquid, protect the surrounding
environment。
1.4 WARNING SIGNS
All safety warning signs presented on the machine with the purpose to draw the operator’s attention from dangerous or unsafe situations. The
labels must be kept clean and they have to be replaced if detached or damaged. Read the meaning of the labels carefully and memorize it.
1.5Noise standard
Lifting machine noise should be less than 75dB, for your health sake, it is recommended to put a noise meter in your work area, observe the noise
of the lifting machine at any time.
Car lift installation, operation and maintenance manual Type：4SF-4000B
5
INTRODUCTION
2.1 Product description：
A：Four car lift is composed of main and sub column ,beam, bridge,approach bridge, safety mechanism, hydraulic cylinder, power unit, control
box,rolling jack and other major components.
B：The power unit is switched on, the gear pump operation, promote the hydraulic oil cylinder piston rod, wire rope driven mobile cylinder
movement process, because the steel wire rope traction between bridge decks and beams, so as to realize the lift up and down movement, and then
achieve the purpose of lifting.
C：The insurance agency safety lock block in each process will automatically rise and bite the column within the rack together, make sure not
because the hydraulic system failure caused by falling.
D: Rolling jack for change the tire for the vehicle
Security structure diagram：
2.2Technical parameter
Type
Lifting capacity
Rise / fall time
Lifting Height
Total height
Total width
Width between
4SF-4000B
4000kg
《75s
1750mm
2205mm
3480.5mm
5495mm
Steel cable
Car lift installation, operation and maintenance manual Type：4SF-4000B
6
2.3Main structure of the machine
1.Main Column 2.Sub Column 3.Control box 4. Power unit optional 5.Column cap 6.Approach spans
7.Main beam 8.Vice beam 9.Main bridge 10.Sub slab bridge 11.Length adjustable rolling jack
INSTALLATION
3.1Before installation
3.1.1 Tools and equipments needed
1.Lifting equipment 1 piece, 2.Antiwear hydraulic oil 10L,3.Electric drill,4.chalk,5.Tape,6.Magnet sag,7.Ф15mm horizontal pipe 8 m ,8.Open
spanner 1 set,9.Inner hexagon spanner 1 set
10.A cross screwdriver ,11.An one word screwdriver,12.A needle nose pliers, 13. Ф17,Ф19,Ф22 Socket wrench each 1,14,Hammer 1 pieces (4
pounds),15.Circlip pliers 1 piece
3.1.2 Ground requirement
The car lift must be installed on the concrete ground level strong, concrete strength is more than 3000psi, the error is less than 5mm, the
minimum thickness of not less than 300mm. in the new pouring concrete need maintenance 20 days above.
3.1.3 Check accessories
Open the package and check for missing parts in accordance with attachment 1 (complete machine packing list). Once found, contact the
distributor or the manufacturer immediately. If leakage is found, installation is still performed,SAFE and distribute shall not be held responsible
and shall not be settled free of charge.
b
e
a
m
Car lift installation, operation and maintenance manual Type：4SF-4000B
7
Packing dimension drawing
3.2 Precautions during installation
▲During installation, please observe that the two upright columns are parallel and vertical to the ground, and shall not be tilted.
▲hydraulic hose and steel cable connection, the joint must be connected in place, so as to avoid oil leakage and steel cable loose.
▲All bolts and nuts must be tightened to ensure fastening.
▲No vehicles shall be placed during the test.
3.3 Installation steps
Step 1：Choose the suitable place：
The lift is for indoor use only. It is installed on strong concrete, not installed on the expansion joint of the cement ground, and shall not be installed
on the ground floor of the two or high floor without the permission of the relevant building personnel.
Step 2：Determine the installation position and lift the hoist to the installation site with a crane.
Note: The four post car lift has three pieces of goods:1 piece of power unit, 1 piece rolling jack and 1 piece machine package
Step 3：Remove the "power unit" to the free place
Step 4：Remove the "rolling jack" in the free place with the lifting device
Step 5：Disassembly package
<1>：The pre placed wood on the ground (wood thickness greater than 120mm), crane for packaging side below the bridge plate is placed on wood,
the purpose is to let off the ground at the bottom of the packing frame.
Car lift installation, operation and maintenance manual Type：4SF-4000B
8
<2>: Remove the packing：
<3>：Remove the connecting screws between the main bridge board and the packing rack. Hang the main bridge board with the crane and put it in
the free space.
Sub bridge plate 1 pieces
<4>:Remove the packing bags, take A:2 approach spans, B:4 block the tire bracket, C:1 spare parts, D:2 dashboard, and put them in the free space.
(A)Approach spans 2 pieces （B) Block the tire bracket 4 pieces （D）Dashboard 2 piece
<5>:Remove the belt and remove the screws from the main and secondary posts and the packing frame. Take D:1 main column ，E：3 sub
column ，F：1 main beam ，G：1 vice beam ,and put them in the free space
Main column 1 pieces (with motor board) Sub column 3 pieces(without motor board)
Car lift installation, operation and maintenance manual Type：4SF-4000B
9
Main beam 1 piece (no gap) Vice beam 1 piece(gap)
<6>:Remove the screw of the main bridge plate under the package and the packing frame,remove the packing frame. Take H: main bridge plate
with the lifting equipment and move to the free space
Main bridge plate 1 piece
Step 6：Determine the machine installation layout：
Mark the standing points of the four posts with tape measure and chalk, make sure the two diagonals are the same length.
Car lift installation, operation and maintenance manual Type：4SF-4000B
10
A:4048 B:2722 C:5267.2 D:4947.5
Step 7：Using the lifting device to position the large parts of lifting machine according to the position below：
7.1,For easy installation, use the “Block the tire bracket ”to pad the beams.
7.2,Pull the wire rope out of the main bridge plate and put the wire rope pass the main vice beam rope wheel.
A：The main and sub slab bridge has been installed before the factory, including cylinder connection, wire rope connection and tubing connection.
B：The main and secondary beam is installed before the factory, including the connection of the unlocking device, the connection of the main
safety, the connection of the cable break safety and the connection of the rope wheel.
Step 8：The main secondary beam is connected with the main and sub slab bridge,dashboard will connect with the main and sub slab
bridge, as shown below:
8.1,Using the M12*25 outer hexagonal bolts, flat washers, spring washers to connect the main secondary beam and the main sub slab bridge
8.2,Using M12*16 outer hexagonal bolts, flat washers, spring washers to connect the dashboard and the main sub slab bridge
Tyre retaining bracket
Table des matières
Autres manuels Safe Système de levage
Manuels Système de levage populaires d'autres marques
morse
morse 82H-124 Manuel utilisateur
Braun
Braun NL955 Series Manuel utilisateur
haacon
haacon 1889.10 Manuel utilisateur
Protekt
Protekt AT 252 Manuel utilisateur
R. Beck Maschinenbau
R. Beck Maschinenbau HS 600 Manuel utilisateur
Nova Technology International, LLC
Nova Technology International, LLC NAS Series Manuel utilisateur
Genie
Genie Z-60/34 Manuel utilisateur
Screen Technics
Screen Technics INTERFIT Vertical Up Lift Manuel utilisateur
Mortuary Lift
Mortuary Lift ULTIMATE 1000 Manuel utilisateur
Custom Equipment
Custom Equipment Hy-Brid 3 Series Manuel de programmation
Custom Equipment
Custom Equipment Hy-Brid Lifts 2 Series Manuel de programmation
Hy-Brid Lifts
Hy-Brid Lifts HB-P3.6 Manuel de programmation
