Sabrent USB-AVCPT Manuel utilisateur
Sabrent USB-AVCPT USB 2.0 VIDEO & AUDIO CAPTURE DVD MAKER
Driver Installation for Windows XP
Note: Windows Vista/7 32-64 Bit instructions are located below these instructions
1. Insert the software disc into your computer’s CD drive.
2. When prompted, Click on Run HAutorun.exe:
3. At the following prompt, Click Install Driver:
4. At the following prompt, Click Install:
5. At the following prompt, Click on Install this driver software:
6. At the following prompt, Click on Finish:
7. Select “Yes, I want to restart my computer now”, and click Finish:
8. Once restarted, plug the USB-AVCPT into a USB port.
9. The Driver Software Installation utility will finalize the installation of the device driver. (Note: This process can
take a few minutes, so please be patient.)
10. Open the Device Manager and verify that the USB-AVCPT was correctly installed. (Note: Your installation may
slightly vary based on the OS you are running)
Driver Installation for Windows Vista/Windows 7 32/64 Bit
1. Connect the USB-AVCPT device into an open USB port on your computer.
2. Click on the Start button, this will bring up the Start menu. In the search box (2.) type in Device Manager. In the
list of results that appears, click Device Manager:
3. Verify that there is an entry for USB 2.0 Video Capture Controller with an exclamation point icon:
4. Open a web browser and navigate to this URL to download the latest driver:
http://sabrent.com/drivers/USB-AVCPT/USB-AVCPT-32bit-64bit-Vista-Win7.zip
5. Right-click the downloaded Zip file and extract the files:
6. Right-click on “Setup”, and click on “Run as administrator”:
7. At the following prompt, Click Install:
8. Click Install:
9. Click Finish:
10. Click on the Start button, this will bring up the Start menu. In the search box (2.) type in Device Manager. In the
list of results that appears, click Device Manager (3.):
11. Verify that there is an entry for STK1160 Grabber with a speaker icon, as well as an entry for USB Audio
Interface:
NOTE: Your unit may show up as an STK1150 or under a different name, as well as under Imaging Devices
rather than Sound, Video and game controllers. Be sure to check both sections to verify your driver is installed
with no exclamation point or question mark.
Installing Ulead VideoStudio
1. Insert the software disc into your computer’s CD drive.
2. When prompted, Click on Run HAutorun.exe:
3. At the following prompt, Click Install Video Studio:
4. Select your language and click Next:
5. Click Next:
6. Click on “I accept the terms of the license agreement” and then click Next:
7. Fill out your Name, Company, and Serial Number, and then Click Next. (Note: The serial number is located on
the disc sleeve, and in a file on the disc. If you cannot find the serial number, navigate to this link:
http://sabrent.com/support/knowledgebase.php?article=57)
8. Click Next:
9. Select the country you are in, then Click Next:
Autres manuels Sabrent Adaptateur
Sabrent
Sabrent DA-VGAH Manuel utilisateur
Sabrent
Sabrent USB-DSC5 Manuel utilisateur
Sabrent
Sabrent VD-GRBR Manuel utilisateur
Sabrent
Sabrent EC-HDSS Manuel utilisateur
Sabrent
Sabrent TH-3HD2 Manuel utilisateur
Sabrent
Sabrent TH-3DP2 Manuel utilisateur
Sabrent
Sabrent TH-3DP2 Manuel utilisateur
Sabrent
Sabrent C35U Manuel utilisateur
Sabrent
Sabrent TH-3HD2 Manuel utilisateur
Sabrent
Sabrent BT-USB Instructions de montage
