Smart Card Reader(CDR-0200)
Smart card reader is amachine controlling access management and making
block mode change in GBMS. Power is supplied by auxiliary power
equipment or local controllerⅡ. lock controller.
Access management function transmits the data to lock controller as it
reads recorded data in card by the method of making customer or traverse
card approach to card reader. Lock controller makes access available by
controlling lock/auto door of entrance door after checking whether
received data is registered or not.
Mode change function transmits the data to lock controller as it reads
recorded data in card by the method of making customer or traverse card
approach to card reader keeping pushed SECOM button of smart card
reader. Controller selects guard modes such as set/cancel/traverse by
checking whether the received data is registered or not.
Use Environment
(1) Use temperature :-20℃ ∼＋45℃
(2) Use humidity :30％ ∼90％(relative humidity)
(3) Installation requirements
－Convenient Place for manipulating machine.
－Install on none-metal.
－Place which is not affected by raining.
－Place which has not direct ray.
－Place which is not affected by heat.
－Place which has not vibration.
－Install at the place that reading distance should be kept more than 5CM.
