Ryobi P320 Manuel utilisateur
12
3
FIGURE 1
Under some conditions, the unit may not deliver
a nail when the air pressure dial is turned to the
MAXIMUM pressure setting. The user may need to
decrease the pressure setting for desired operation.
(Refer to Setting the Air Pressure in the operator’s
manual page 9.)
FIGURE 2
NOTICE:
Remove battery pack before performing any of
the steps described below.
Driving too deeply into the material, excess debris, or
jammed nails may lead to a driver blade being stuck
at its bottom position.
The driver blade can usually be returned to its
operating position by depressing the work contact
element against a scrap piece of wood and squeezing
the trigger.
If this does not automatically return the drive blade
into the tool, remove the battery and refer to the
figure 2 and instructions in the operators manual on
removing a jammed nail.
(Refer to Removing a Jammed Brad Nail in the
operator’s manual page 10.)
990000552
2-21-13 (REV:01)
OPERATOR’S MANUAL
ADDENDUM
P320
Fig. 1
Fig. 2
A
B
C
D
A - Air pressure dial (cadran de pression d’air, cuadrante de
presión de aire)
B - Index arrow (flèche repère, flecha indicadora)
C - Decrease pressure (réduire la pression, disminuir la presión)
D - Increase pressure (augmenter la pression, aumentar la
presión) ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625
USA
1-800-525-2579 • www.ryobitools.com
A subsidiary of Techtronic Industries Co., Ltd.
OTC: TTNDY
A
C
D
A - Screwdriver (tournevis, destornillador)
B - Latch (loquet, pestillo)
C - Jam release (déblocage, soltador)
D - Driver blade (lame d’entraînement, hoja de empuje)
A
B
For Ryobi Customer Service
call 1-800-525-2579.
12
3
FIGURE 1
Under some conditions, the unit may not deliver
a nail when the air pressure dial is turned to the
MAXIMUM pressure setting. The user may need to
decrease the pressure setting for desired operation.
(Refer to Setting the Air Pressure in the operator’s
manual page 9.)
FIGURE 2
NOTICE:
Remove battery pack before performing any of
the steps described below.
Driving too deeply into the material, excess debris, or
jammed nails may lead to a driver blade being stuck
at its bottom position.
The driver blade can usually be returned to its
operating position by depressing the work contact
element against a scrap piece of wood and squeezing
the trigger.
If this does not automatically return the drive blade
into the tool, remove the battery and refer to the
figure 2 and instructions in the operators manual on
removing a jammed nail.
(Refer to Removing a Jammed Brad Nail in the
operator’s manual page 10.)
990000552
2-21-13 (REV:01)
OPERATOR’S MANUAL
ADDENDUM
P320
Fig. 1
Fig. 2
A
B
C
D
A - Air pressure dial (cadran de pression d’air, cuadrante de
presión de aire)
B - Index arrow (flèche repère, flecha indicadora)
C - Decrease pressure (réduire la pression, disminuir la presión)
D - Increase pressure (augmenter la pression, aumentar la
presión) ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625
USA
1-800-525-2579 • www.ryobitools.com
A subsidiary of Techtronic Industries Co., Ltd.
OTC: TTNDY
A
C
D
A - Screwdriver (tournevis, destornillador)
B - Latch (loquet, pestillo)
C - Jam release (déblocage, soltador)
D - Driver blade (lame d’entraînement, hoja de empuje)
A
B
For Ryobi Customer Service
call 1-800-525-2579.
12
3
FIGURE 1
Under some conditions, the unit may not deliver
a nail when the air pressure dial is turned to the
MAXIMUM pressure setting. The user may need to
decrease the pressure setting for desired operation.
(Refer to Setting the Air Pressure in the operator’s
manual page 9.)
FIGURE 2
NOTICE:
Remove battery pack before performing any of
the steps described below.
Driving too deeply into the material, excess debris, or
jammed nails may lead to a driver blade being stuck
at its bottom position.
The driver blade can usually be returned to its
operating position by depressing the work contact
element against a scrap piece of wood and squeezing
the trigger.
If this does not automatically return the drive blade
into the tool, remove the battery and refer to the
figure 2 and instructions in the operators manual on
removing a jammed nail.
(Refer to Removing a Jammed Brad Nail in the
operator’s manual page 10.)
990000552
2-21-13 (REV:01)
OPERATOR’S MANUAL
ADDENDUM
P320
Fig. 1
Fig. 2
A
B
C
D
A - Air pressure dial (cadran de pression d’air, cuadrante de
presión de aire)
B - Index arrow (flèche repère, flecha indicadora)
C - Decrease pressure (réduire la pression, disminuir la presión)
D - Increase pressure (augmenter la pression, aumentar la
presión) ONE WORLD TECHNOLOGIES, INC.
1428 Pearman Dairy Road, Anderson, SC 29625
USA
1-800-525-2579 • www.ryobitools.com
A subsidiary of Techtronic Industries Co., Ltd.
OTC: TTNDY
A
C
D
A - Screwdriver (tournevis, destornillador)
B - Latch (loquet, pestillo)
C - Jam release (déblocage, soltador)
D - Driver blade (lame d’entraînement, hoja de empuje)
A
B
For Ryobi Customer Service
call 1-800-525-2579.
Autres manuels pour P320
3
Table des matières
Autres manuels Ryobi Cloueuse
Ryobi
Ryobi YN200BND Manuel utilisateur
Ryobi
Ryobi YN200BN Manuel utilisateur
Ryobi
Ryobi R18GN18 Manuel utilisateur
Ryobi
Ryobi R18GN18-120S Manuel utilisateur
Ryobi
Ryobi R18GN18X Manuel utilisateur
Ryobi
Ryobi P300 Manuel utilisateur
Ryobi
Ryobi R18N18G Manuel utilisateur
Ryobi
Ryobi R18N16G-0 Manuel utilisateur
Ryobi
Ryobi CNS-1801M Manuel utilisateur
Ryobi
Ryobi P300 Manuel utilisateur
Ryobi
Ryobi R18N18G Manuel utilisateur
Ryobi
Ryobi P300 Manuel utilisateur
Ryobi
Ryobi ONE+ PBL350 Manuel utilisateur
Ryobi
Ryobi P318 Guide de configuration rapide
Ryobi
Ryobi CST-180M Manuel utilisateur
Ryobi
Ryobi P318 Manuel utilisateur
Ryobi
Ryobi YN250SFD Manuel utilisateur
Ryobi
Ryobi RADG14 Manuel d'utilisation
Ryobi
Ryobi P301 Manuel utilisateur
Ryobi
Ryobi YN250FSE Manuel utilisateur
Manuels Cloueuse populaires d'autres marques
Performance Tool
Performance Tool M643 Manuel utilisateur
Hitachi
Hitachi VH650 - Fencing Nailer, Full Head Manuel utilisateur
Parkside
Parkside PET 25 B1 Manuel utilisateur
Senco
Senco Fusion Technology F-35XP Manuel utilisateur
Grizzly
Grizzly G1847 Manuel utilisateur
Black & Decker
Black & Decker 492848-00 Manuel utilisateur
