Russell Hobbs RHMP700 Manuel d'instructions d'installation

MULTI PROCESSOR

MODEL RHMP700

Instructions & Warranty

RHMP700_IB&RB_180211

Russell Hobbs has been synonymous with life in the kitchen for

over 50 years. Known, owned and proudly on display in

millions of homes across the country. Allow Russell Hobbs to

forge a reputation for timeless, stylish appliances in your home.

Russell Hobbs through and through

Complete range of Russell Hobbs products are available at

www.russellhobbs.com.au | www.russellhobbs.co.nz

Salton (Aust) Pty. Ltd. | P.O. Box 683 Braeside Victoria 3195 Australia | TollFree 1800 427 824

Salton NZ Ltd. | P.O. Box 300 201 Albany Auckland 0752 New Zealand | FreeCall 0508 629 777

Congratulations on the purchase of your Russell Hobbs appliance. Each unit is manufactured to

ensure safety and reliability. Before using the appliance for the first time, please read the instruction

booklet carefully and keep it for future reference. Pass it on if you pass on the appliance.

When using electrical appliances, basic safety precautions should always be followed.

Limited 2 year warranty

There is no need to post us anything, just retain your receipt/proof of purchase with this booklet.

Nothing in this warranty or the instructions relating to the product excludes, restricts or otherwise

affects your statutory rights under the Trade Practices Act 1974 and other relevant legislation.

In addition to your statutory rights, Salton (Aust) Pty Ltd and Salton NZ Ltd (hereafter referred to as

“Salton”) provide a LIMITED 2 YEAR WARRANTY for this product. Salton warrants this product

free from defects in material and workmanship for two (2) years from the date of purchase. Within

this warranty period Salton will repair or replace defective parts at no charge. Defective products

may be returned to Salton or the place of purchase. If distance prevents you from taking the

product to the place of purchase, please call the Salton Customer Service department TollFree

within Australia 1800 427 842, or FreeCall within New Zealand 0508 629 777.

The warranty does not cover improper installation, misuse, abuse or neglect of the product. This

warranty also does not cover any product taken apart, altered or serviced by an unauthorised repairer.

Registration of your warranty is not compulsory, but entitles you to receive these benefits:

3URGXFWLQIRUPDWLRQ 3URGXFWKLQWVDQGWLSV

5HFLSHVDQGQHZV ,QIRUPDWLRQRQVSHFLDOSULFHRffers and promotions

If you live in Australia please visit

www.salton.com.au/warranty

If you live in New Zealand please visit

www.salton.co.nz/warranty

AUSTRALIAN CUSTOMER SERVICE

Salton (Aust) Pty. Ltd.

P.O. Box 683

Braeside Victoria 3195

Australia

TollFree: 1800 427 842

Hours: 9am-5pm (EST) Mon-Fri

Any questions?

Please contact Customer Service for advice.

NEW ZEALAND CUSTOMER SERVICE

Salton NZ Ltd.

P.O. Box 300 201

Albany Auckland 0752

New Zealand

FreeCall: 0508 629 777

Hours: 9am-5pm Mon-Fri

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of

the outer cover. To reduce the risk of fire or electric shock, do not attempt to remove the

outer cover. There are no user-serviceable parts inside. Repair should be done only by

qualified service personnel.

ELECTRICAL CORD

The cord of this appliance was selected to reduce the possibility of tangling in or tripping

over a longer cord. If more length is needed, use an extension cord rated no less than

10 amperes. When using an extension cord, do not let it drape over the working area or

dangle where someone could accidentally trip over it. Handle cord carefully for longer life;

avoid jerking or straining it at outlet and appliance connections. The maximum rating is

based on the chopping blade; other attachments may draw significantly less power.

INTRODUCTION

Thank you for choosing the Russell Hobbs Multi Processor.

 700 Watt motor delivers the power to perform all your processing needs.

 At the touch of a button you can blend, slice, chop, shred, grate, puree and much more.

 Handles large food items without having to section it.

 Brushed stainless steel exterior makes cleaning a breeze and removable parts are

dishwasher safe.

GETTING FAMILIAR WITH YOUR UNIT

10 cup

food processor 3 cup

chopping bowl 6 cup blender

Wide mouth

feed chute Suction feet Powerful

700 Watt motor

1. Food pusher

2. Wide-mouth feed chute

3. 10 cup processing workbowl cover

4. Coarse slice/shred disc

5. Disc stem

6. 10 cup processing workbowl

6A. Centre Post (White)

7. Base

8. Storage lid

9. Dough blade

10.Large stainless steel chopping blade

(White)

11. Fine slice/shred disc

12.Cord wrap (under base)

13.Non-slip suction feet

14.Controls

15.3 cup workbowl cover

16.Small stainless steel chopping blade

(Black)

17.3 cup processing workbowl

17A. Centre Post (Black)

13 12 11

17A

NOTE: Product may vary slightly

from what is illustrated.

18.Lid cap with measurement units

19.Lid

20.6 cup (1250 ml) glass blender jug

21.Handle

22.Gasket

23.Blade assembly

24.Jug base

BEFORE FIRST USE

Important: Handle chopping blades and slice/shred disc carefully.

Remove all packaging material and any stickers from the product. Wash all removable

parts as instructed in “care and cleaning” section of this manual. Select a level, dry

countertop where the appliance is to be used, allowing air space on all sides to provide

proper ventilation for the motor (50mm gap min).

ASSEMBLING THE FOOD PROCESSOR / MINI CHOPPER

HOW TO INSERT AND REMOVE THE CENTRE POST

The centre post of the bowl is removable (3 Cup - Black, 10 Cup - White):

1. Turn the bowl upside down.

2. Grasp the outer tabs and turn the centre post clockwise until the

locking tabs are free. Lift the post out (A).

3. To return to its original position, place centre post into opening

in bottom of workbowl and turn counterclockwise until tabs snap

into place.

NOTE: The 10 cup bowl and 3 cup bowl centre posts are not

interchangeable.

HOW TO LOCK THE WORKBOWL IN POSITION:

1. Place the workbowl on the base with handle turned to the right

of the locking mechanism (B) over the unlock symbol .

2. Hold handle and rotate workbowl clockwise toward the lock

symbol XQWLOLWFOLFNV¿UPO\LQWRSODFH&%HVXUHWRORFNWKH

workbowl in place before attaching the blades and cover.

HOW TO LOCK THE COVER

1. Place cover over workbowl with the small latch to the right of the

workbowl’s handle (D).

2. Hold feed chute of workbowl cover and rotate cover clockwise

until cover locks into place.

Important: For your protection this appliance has an interlock

system. The processor will not operate unless the workbowl, cover

and wide-mouth feed chute are properly locked in place.

3. Place the wide-mouth feed chute on top of the cover with the

small tab to the right of the workbowl’s handle. Turn clockwise

until it clicks into position in the handle.

4. Insert the food pusher into the central tube of the wide mouth

feed chute. Turn clockwise to lock in place. The pusher is used

to guide foods through the feed chute and can be removed when

adding liquid or additional foods while the processor is running.

To remove, turn counterclockwise.

CONTROLS

The controls are located on the front of the base (E). Press PULSE, HIGH or LOW to

select a function (see directions below).

OFF/PULSE

Processor should be stored in OFF position and unplugged when

not in use.

Use PULSE for short processing tasks. This lets you control the

size and uniformity of foods being chopped.

The OFF/PULSE button must be pressed and held for the

appliance to operate in PULSE mode. When released, the

appliance will stop.

The motor of the processor will run as long as the OFF/PULSE button is held down.

Press the button and then release to allow the blades to stop running and the food to fall

to the bottom of the workbowl.

Pulsing gives better control when chopping, mincing, mixing and blending foods. You can

FRQWUROWKHVL]HRIWKHIRRGVIURPFRDUVHWR¿QH

HIGH AND LOW

When either speed is selected, the processor will run continuously until the OFF/PULSE

button is pressed.

HOW TO CHOP IN THE WORKBOWL

7KHFKRSSLQJEODGHLVXVHGWRFRDUVHO\RU¿QHO\FKRSPLQFHPL[DQGSXUHHIRRGVWRD

smooth consistency. 1. Lock workbowl into position (see Illustrations B and C).

2. Hold chopping blade by centre shaft and insert onto centre post

(F).

Caution: The blade attachments are very sharp. Use caution

when handling and storing.

3. Place food in workbowl.

4. Place cover on workbowl and lock into place by rotating

clockwise (see Illustration D).

5. Place the wide-mouth feed chute and food pusher in place, turn to lock.

,PSRUWDQW1HYHUXVH\RXU¿QJHUVWRGLUHFWIRRGWKURXJKWKHFKXWH

6. Select your desired speed (PULSE, LOW or HIGH).

NOTE: Process foods for no more than a few seconds at a time. Pulsing produces

excellent results and offers greater control.

7. Food can be added while processor is running; remove food pusher and insert food

through the feed chute. Replace food pusher in chute.

Important: Be sure chopping blade has completely stopped spinning before

removing cover from processor.

8. Press the OFF/PULSE button and allow blades to stop revolving before removing

cover. Twist cover toward to remove.

9. Unlock workbowl by turning it counterclockwise and lift off base.

NOTE: Remove bowl from appliance before removing blade to prevent food from leaking

through the centre opening of the bowl.

10.Carefully remove chopping blade.

11. Unplug appliance when not in use.

HELPFUL TIPS FOR CHOPPING AND BLENDING

The processor works very quickly.

Watch carefully to avoid over-processing foods.

The PULSE button offers the best control and results.

For best results, process foods that are about the same size.

Do not overload the bowl.

Never walk away from the processor while it is on.

Use hot but never boiling liquids.

Do not process more than 3 cups liquid in the workbowl at one time.

To process meat, use no more than 2 cups of 20mm cubes in the workbowl. Process

using PULSE in 5 second intervals.

The workbowl has a capacity of 10 cups.

 ,QVHUWDIXQQHOLQWRWKHIHHGFKXWHZKHQDGGLQJLQJUHGLHQWVVXFKDVRLOÀRXUDQGVXJDU

USING THE DOUGH BLADE (same assembly method as the chopping blade)

7KLVEODGHPDNHVSUHSDULQJGRXJKHI¿FLHQWDQGWLPHVDYLQJ

1. This blade does not extend to the outside rim of the workbowl, so it cannot incorporate

ÀRXUZKHQYHU\VPDOODPRXQWVRIÀRXUDUHEHLQJSURFHVVHG

2. Push dough blade down as far as it will go into workbowl.

3. Insert all the dry ingredients into the workbowl.

4. Place cover on workbowl. Add wide-mouth feed chute and food pusher. Process to

blend.

5. Add liquids through the small feed chute with machine running.

HELPFUL TIPS WHEN USING THE DOUGH BLADE

 )RUEHVWUHVXOWVGRQRWSUHSDUHUHFLSHVXVLQJPRUHWKDQòFXSVÀRXU

 %HJLQZLWKFXSOHVVWKDQWKHPD[LPXPDPRXQWRIÀRXUDQGDGGDGGLWLRQDOÀRXURQFH

mixture is well blended.

Pour liquid through food chute gradually.

Knead dough no longer than 1 minute.

Do not leave processor unattended during operation.

HOW TO SLICE OR SHRED

1. Lock workbowl into position (see Illustrations B and C).

2. Place disc stem onto centre post in workbowl.

3. Carefully place slice/shred disc on stem with appropriate side up (depending on work to

be done).

CAUTION: The blade attachments are very sharp. Use caution when handling and storing.

4. Place cover on workbowl and lock into place by rotating cover clockwise (see

Illustration D).

5. For large size food insert before attaching the chute, then attach chute and use the

pusher Fig G(a). For smaller size food attach cover and feed through using pusher.

NOTE that the pusher clips onto the moving chute tube. Fig G.

6. 6HOHFW38/6(/2:RU+,*+SUHVV¿UPO\RQIRRGSXVKHUWRJXLGHIRRGWKURXJK

processor, but do not force it.

NOTE: Heavy pressure on the pusher does not speed the work; use the pusher only as a

guide. Let the processor do the work.

7. :KHQ¿QLVKHGSUHVV2))38/6(DQGZDLWIRUGLVFWRVWRSURWDWLQJEHIRUHUHPRYLQJ

cover. Twist cover toward to remove.

8. Carefully remove slice/shred disc. Unlock workbowl by turning it counterclockwise and

lifting it off the base.

9. Unplug appliance when not in use.

HELPFUL TIPS WHEN SLICING AND SHREDDING

Before slicing round fruits and vegetables in the processor, cut a thin slice from the

bottom so food will be more stable. Place food cut side down in feed chute.

Always remove seeds and pits before processing.

Remove the core from hard vegetables, such as cabbage.

When slicing thinner vegetables, cut them just short of the length of the feed chute and

stand them vertically in feed chute so they are solidly packed and cannot turn or tilt.

Shred hard cheeses at room temperature.

Soft and semi-hard cheeses should be well chilled before shredding.

After food has been processed, remove the cover and invert on countertop. Remove

the slice/shred disc before removing the workbowl from the processor. Place the disc

on top of the inverted workbowl cover.

GG(a)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Russell Hobbs Robot culinaire

Russell Hobbs

Russell Hobbs 18558-56 Manuel utilisateur

Russell Hobbs

Russell Hobbs 14499 Manuel utilisateur

Russell Hobbs

Russell Hobbs 14568 Manuel utilisateur

Russell Hobbs

Russell Hobbs RHFP6010AU Manuel d'instructions d'installation

Russell Hobbs

Russell Hobbs 19003 Manuel utilisateur

Russell Hobbs

Russell Hobbs RHFP6010AU Manuel d'instructions d'installation

Russell Hobbs

Russell Hobbs Compact Home 25280-56 Manuel utilisateur

Russell Hobbs

Russell Hobbs Aura 19005-56 Guide d'installation

Russell Hobbs

Russell Hobbs 19460-56 Manuel utilisateur

Russell Hobbs

Russell Hobbs 22220-56 Manuel utilisateur

Russell Hobbs

Russell Hobbs RHFP1000 Manuel d'instructions d'installation

Russell Hobbs

Russell Hobbs FP3100RDR Manuel utilisateur

Russell Hobbs

Russell Hobbs DESIRE RHMFP5BLK Manuel d'instructions d'installation

Russell Hobbs

Russell Hobbs 24732 Manuel utilisateur

Russell Hobbs

Russell Hobbs RHPK1002 Fiche d'information produit

Russell Hobbs

Russell Hobbs 19440-56 Manuel utilisateur

Russell Hobbs

Russell Hobbs 19030 Manuel utilisateur

Russell Hobbs

Russell Hobbs 19005-56 Manuel utilisateur

Russell Hobbs

Russell Hobbs PRO ELITE RHFP001 Guide d'installation

Russell Hobbs

Russell Hobbs 24662-56 Manuel utilisateur

Russell Hobbs

Russell Hobbs 22220-56 Manuel utilisateur

Russell Hobbs

Russell Hobbs 21510-56 Manuel utilisateur

Russell Hobbs

Russell Hobbs 24732 Manuel utilisateur

Russell Hobbs

Russell Hobbs RHMP5000 Manuel d'instructions d'installation

Manuels Robot culinaire populaires d'autres marques

INNOLIVING

INNOLIVING INN-727 Manuel utilisateur

Berkel

Berkel C32 Manuel utilisateur

Beko

Beko CHP5554W Manuel utilisateur

KitchenAid

KitchenAid 5KFP0719 Manuel utilisateur

QUIGG

QUIGG KM 2017Wi.20 Manuel utilisateur

Lakeland

Lakeland PRESS AND CHOP 31557 Manuel utilisateur

Bosch

Bosch MMR08 GB Series Manuel utilisateur

HOFFEN

HOFFEN Chef Express T9532 Manuel utilisateur

Garland

Garland 852 ZG Manuel utilisateur

Robot Coupe

Robot Coupe CL50 Gourmet Manuel utilisateur

SAPIRHOME

SAPIRHOME SP-1111-K Manuel utilisateur

Moulinex

Moulinex DJ3051 Manuel utilisateur

Bosch

Bosch MUM5 Manuel utilisateur

cecotec

cecotec Mambo Touch Manuel utilisateur

KitchenAid

KitchenAid 9KFC0516 Manuel utilisateur

Black & Decker

Black & Decker hc 300 Instructions d'installation

Gorenje

Gorenje SBR 1000 DV Manuel utilisateur

Arzum

Arzum AR 1128 Manuel utilisateur