RUPTELA FM-Pro3 Instructions de montage
1
RUPTELA
GPS/ GSM Terminal
Model: FM-Pro3
MANUAL
v1.1
2
Content
1. INTRODUCTION
1.1. S FETY REQUIREMENTS
1.2. LEG L NOTICE
1.3. CRONYMS ND TERMS USED IN DOCUMENT
2. B SIC DESCRIPTION
2.1. P CK GE CONTENTS
2.2. DDITION L CCESSORIES
2.3. B SIC CH R CTERISTICS
2.4. TECHNIC L FE TURES
2.5. FM-PRO3 DIMENSIONS
2.6. LED ST TUSES
2.7. PINOUT, CONNECTION
2.8. SPECI L FE TURES
3. INST LL TION INSTRUCTIONS
3.1. MODULE INST LL TION
3
1. INTRODUCTION
1.1. S FETY REQUIREMENTS
ll the associated (additional) equipments as PC, batteries, sensors
and others, shall meet the requirements of standard EN60950-1.
Do not disassemble the Terminal. If the enclosure of Terminal is
damaged, or the insulation of wires is damaged, first of all unplug the
10 pins connector from the Terminal carefully.
ll the wireless data transferring equipments produce interference that
may affect other devices which are placed nearby.
The Terminal can be installed or dismounted only by qualified
personnel!
The Terminal must be firmly fastened in the predefined location.
Predefined location is explained in the Mounting instructions.
The programming must be performed using a 2nd safety class of PCs
(with autonomic power supply).
Be sure the Terminal is installed in the place where it cannot be
reached by water drops and humidity.
Caution
!
!!
!
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the instructions.
ny installation and/or handling during a lightning storm is prohibited.
4
Use cables provided with FM-Pro3 device.
Ruptela is not responsible for any harm caused by using wrong cables
for PC <-> FM-Pro3 connection.
ttention! Do not connect wrongly the wires marked (+ battery) and
(chassis) to battery poles. If poles are mixed, the device will broke.
To disconnect the device from power supply, you need to disconnect
10 pins plug and plug for internal battery.
This chapter contains information on how to operate FM-Pro3 safely. By following these
requirements and recommendations, you will avoid dangerous situations. You must read these
instructions carefully and follow them strictly before operating the device! The Terminal is
supplied from a car battery with its ratings: 12/24V 1 /500m . The allowed voltage range
for battery: 10…32V DC.
To avoid mechanical damage, it is advised to transport the Terminal FM-Pro3 in an impact-
proof package.
Before connecting the wires of 12 pins plug to the vehicle, ensure that 10 pins plug is
disconnected from the Terminal. Be sure that cross-
sectional area of mounting wires is at
least 0.75 mm
2
.
To dismount Terminal correctly from the vehicle, first of all disconnect 10 pins plug and only
then other plugs or interfaces can be disconnected.
lways connect 12 pins plug before connecting 10 pins plug.
The Terminal is intended to be installed in a restricted access location, which is inaccessible
for the operator. The Terminal FM-Pro3 is not intended to be used for boats.
5
1.2. LEG L NOTICE
Copyright © 2011 Ruptela. ll rights reserved. Reproduction, transfer, distribution or storage
of part or all of the contents in this document in any form without the prior written permission of
Ruptela is prohibited. Other products and company names mentioned here may be trademarks
or trade names of their respective owners.
1.3. CRONYMS:
• PC – Personal Computer.
• GPRS – General Packet Radio Service.
• GPS – Global Positioning System.
• GSM – Global System for Mobile Communications.
• SMS – Short Message Service.
• C/DC – lternating Current/Direct Current.
• Record – Data stored in FM-Pro3 memory. Data contains GPS and I/O Information.
• FMS – an optional standard interface of different truck manufacturers.
• Simplified RS232 - connection standard between different pieces of equipment. Simplified
RS232 has only Rx and Tx lines.
• LED – Light Emitting Diode.
• C N-bus – FMS standard interface.
• I/O – Inputs / Outputs.
• OBD - On-Board Diagnostics socket, it can be found on a lot of vehicles.
• K_Line, L_Line – it is pins of OBD interface.
6
2. B SIC DESCRIPTION
FM-Pro3 is a Terminal with GPS / GSM connectivity, which is able to determine the object’s
coordinates and transfer them via the GSM network. This Terminal is perfectly suitable for
applications where location acquirement of remote objects is needed. It is important to mention
that FM-Pro3 has additional inputs and outputs, which lets controlling and monitoring other
devices on remote objects. 1-Wire® interface (for Dallas digital thermometer or I-Button reader)
and C N-bus interface integrated (for trucks FMS interface data acquisition). It also has 2
simplified RS232 ports for connecting additional equipments such as Personal Navigation
Device, digital fuel sensor or other (special firmware is needed for this).
Figure1. Example of application of
GPS/GSM TERMIN L
FMPro-3
for controlling and monitoring of remote objects
7
2.1. P CK GE CONTENTS
Figure2. FM-Pro3 device, Power, I/O cables and GPS antenna.
The FM-Pro3 device is supplied to the customer in a cardboard box containing all the
equipment that is necessary for operation. The package contains:
• The FM-Pro3 device.
• 10 pin plug with wires for power supply and I/O connection
• Magnetic GPS antenna with sticker.
• 12 pin plug with wires for C N-bus, 1-Wire, simplified RS232 and K-line connection.
2.2. DDITION L CCESSORIES
There are two accessories available for FM-Pro3 that is not included in the package:
• Temperature sensor
• I-Button
Note: the manufacturer does not supply a SIM card in the package, which is necessary for
connection to the GSM network! SIM card can be obtained from your local GSM service
provider! SIM card can work with the Terminal only when all SIM card security codes are
disabled!
If any of the components are not in the package, please contact the manufacturer’s
representative or the vendor (www.ruptela.com).
8
2.3. B SIC CH R CTERISTICS
Inputs / Outputs:
IO1 – 10 pin (2x5 plug):
IO2 – 12 pin (2x6 plug):
Paired connections scheme:
Other Inputs / Outputs are not paired. lso two spare Chassis pins can be paired with any
I/O, they are only for easier mounting.
9
2.4. TECHNIC L FE TURES:
Power supply External Battery Ratings:
+12/24V 1 /500m
Internal battery Ratings:
Li-Po 3.7V 800 m h
GPS Ublox module (with
external GPS antenna)
GPRS/GSM Simcom module (with
internal GPS antenna)
Motion
sensor
Micro vibration sensor
Fuses External fuse (mounted
into +B T wire):
F 2 L
Internal fuse (mounted
into internal battery
module):
SMD 2
LED’s GPS fix led,
GSM led,
Peripheral led,
ll LED’s are green.
Mini USB Mini USB socket
SIM Sim card holder with lock
Dimensions 92.2 x 64 x 25.2 mm
0 pin plug Tyco multi-lock 4-
794619-0 socket
Weight 140g
2 pin plug Tyco multi-lock 4-
794619-2 socket
Temperatures
Operational temp.:
-35°C ... +55°C
Storage temp.:
-40°C ... +65°C
Housing /
Material
UL94-HB Plastic case
2x Simplified
RS232 ports
PORT Rx, Tx
PORTB Rx, Tx
10
2.5. FM-PRO3 DIMENSIONS
Table des matières
Autres manuels RUPTELA GPS
RUPTELA
RUPTELA FM Pro Manuel d'installation
RUPTELA
RUPTELA fm-eco4 light 3g Manuel utilisateur
RUPTELA
RUPTELA HCV5 Series Manuel d'instructions
RUPTELA
RUPTELA HCV5 Series Manuel utilisateur
RUPTELA
RUPTELA FM-Eco3 Feuille d'instructions
RUPTELA
RUPTELA FM-Pro4 Manuel utilisateur
RUPTELA
RUPTELA fm-eco4 light 3g Manuel utilisateur
RUPTELA
RUPTELA FM-Tco4 HCV Manuel utilisateur
RUPTELA
RUPTELA fm-eco4 light 3g Manuel utilisateur
RUPTELA
RUPTELA FM-Plug4 Manuel utilisateur
RUPTELA
RUPTELA FM-Eco4 S Series Manuel utilisateur
RUPTELA
RUPTELA HCV5 Series Manuel d'instructions
RUPTELA
RUPTELA FM-Pro4 Manuel utilisateur
RUPTELA
RUPTELA fm-eco4 light 3g Manuel utilisateur
RUPTELA
RUPTELA FM-Plug 4 Manuel utilisateur
RUPTELA
RUPTELA FM-Eco4+ 3G ET Manuel utilisateur
RUPTELA
RUPTELA HCV5 Series Manuel utilisateur
RUPTELA
RUPTELA FM-Tco4 HCV Manuel utilisateur
RUPTELA
RUPTELA HCV5 Series Manuel utilisateur
RUPTELA
RUPTELA FM-Pro4 Manuel utilisateur
