program will continue from that point at which it was in-
terrupted by the power failure.
In its respective life cycle phases (transport, commission-
ing, setup, operation, cleaning, decommissioning, care /
maintenance, dismantling / disposal) this machine is de-
signed for 1-person operation!
When using this machine, no other person may be present
near the machine. The exception (2-man operation):
•Installation and removal of drum lid
•Installation and removal of drum lid arms
•Installation and removal of tumbling arm
•Installation and removal of mixing arm
•Installation and removal of protective gearbox cover
•Transport of machine and machine parts
Depending on the user programs, temperatures down to -
10 C may be generated in the drum. Take the correspond-
ing precautions.
Do not touch the tumbling arm / mixing arm with your
hands or any object when they are moving! Their rota-
tional speed while the lid is open is restricted for safety
reasons!
Make sure before each lifting operation that both stand-
ard trolleys sit correctly in the standard trolley support of
the lifting aid!
No persons or objects may be present in the swivel range
of the drum!
When emptying the drum corresponding appropriate pre-
cautions must be taken to ensure that no person stands in
the discharge area of the machine!
Make sure when mounting (or adjusting) the tumbling arm
as well as the mixing arm (alternative blind plug) that
they are correctly locked!
No persons or interfering objects may be present in the
swivel range of the lid!
