RuggedCom RuggedWireless RS910W Manuel utilisateur
RuggedCom Inc. I30 Whitmore Road, Woodbridge, Ontario, Canada L4L 7Z4
Tel: (905) 856-5288 I Fax: (905) 856-1995 IToll Free: (888) 264-0006
Rugged
RuggedRugged
RuggedWireless
WirelessWireless
Wireless
RS9
RS9RS9
RS91
11
10
00
0W
WW
W
Wireless Device Server with 2 Serial Port and/or 2 Ethernet
Ports
Installation Guide
www.ruggedcom.com
2
2007 RuggedCom Inc. All rights reserved Rev100
Federal Communications Commission
Radio Frequency Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device
pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications
Operation of this equipment in a residential area is likely to cause harmful interference in which
case the user will be required to correct the interference at his expense
Trademarks:
Ethernet is a trademark of Xerox Corporation
RuggedSwitch, RuggedRated, ROS and eRSTP are trademarks of RuggedCom® Inc
Caution
This product contains a laser system and is classified as a “CLASS 1 LASER PRODUCT”
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure This product contains no user serviceable parts
Attempted service by unauthorized personnel shall render all warranties null and void
Should this device require service see the “Warranty” section of this installation guide
Important
This unit should be installed in a restricted access location where access can only be gained by
service personnel or users who have been instructed about the reasons for the restrictions
applied to the location and about any precautions that shall be taken; and access is through the
use of a tool or lock and key, or other means of security, and is controlled by the authority
responsible for the location
3
2007 RuggedCom Inc. All rights reserved Rev100
Table of Contents
1Product Overview ............................................................................................................................... 5
1.1 Functional Overview ................................................................................................................... 5
1.2 Feature Highlights ...................................................................................................................... 5
1.3 RS910W Front Panel Description ............................................................................................... 6
1.4 RS910W Bottom Panel Description............................................................................................. 7
2Installation........................................................................................................................................... 8
2.1 Din Rail Mounting....................................................................................................................... 8
2.2 Power Supply Wiring and Grounding ......................................................................................... 9
2.3 Failsafe Output Wiring.............................................................................................................. 12
2.4 RS232 Console Port Wiring ...................................................................................................... 13
3Serial Ports ........................................................................................................................................ 14
4Ethernet Ports ................................................................................................................................... 18
4.1 RJ45 Ethernet Ports .................................................................................................................. 18
4.2 Fiber Optic Ethernet Ports........................................................................................................ 19
4.3 Ethernet Panel Description ....................................................................................................... 19
5Technical Specifications ................................................................................................................... 21
5.1 Operating Environment............................................................................................................. 21
5.2 Power Supply Specifications ..................................................................................................... 21
5.3 Failsafe Relay Specifications .................................................................................................... 21
5.4 Wireless Standards Supported................................................................................................... 22
5.5 Radio Characteristics................................................................................................................ 22
5.6 IEEE 802.11b/g ......................................................................................................................... 22
5.7 Serial Ports................................................................................................................................ 23
5.8 Ethernet Ports............................................................................................................................ 24
5.9 Communication Standards ........................................................................................................ 25
5.10 Mechanical Specifications......................................................................................................... 26
6Type Tests.......................................................................................................................................... 27
6.1 IEC 61850-3 Type Tests ............................................................................................................ 27
6.2 IEEE 1613 Type Tests ............................................................................................................... 28
6.3 IEC Environmental Type Tests.................................................................................................. 28
7Warranty ........................................................................................................................................... 29
8Appendix A - RuggedWireless ™ Frequently Asked Questions (FAQ) ....................................... 30
4
2007 RuggedCom Inc. All rights reserved Rev100
Table of Figures
Figure 1 - RS910W Front Panel Description.............................................................................................. 6
Figure 2 - RS910W Bottom Panel Description........................................................................................... 7
Figure 3 - RS910W DIN Rail Mounting ..................................................................................................... 8
Figure 4 - RS910W Power Supply Inputs................................................................................................... 9
Figure 5 - DC Power supply wiring and grounding diagram ................................................................. 10
Figure 6 - Dielectric Strength Testing....................................................................................................... 11
Figure 7 - RS910W Failsafe Output Relay ............................................................................................... 12
Figure 8 - RS232 Female DCE pin-out ..................................................................................................... 13
Figure 9: Fiber Serial Interface (ST Connector) ..................................................................................... 14
Figure 10: DB9 Port pin-out...................................................................................................................... 15
Figure 11: RJ45 Port pin-out..................................................................................................................... 16
Figure 12: Conceptual recommended RS485 wiring diagram ............................................................... 17
Figure 13 - RJ45 Ethernet port pin-out.................................................................................................... 18
Figure 14: 10FL ST connector.................................................................................................................. 19
Figure 15: 100FX MTRJ connector ......................................................................................................... 19
Figure 16: 100FX ST connector ............................................................................................................... 19
Figure 17: 100FX LC connector............................................................................................................... 19
Figure 18: 100FX SC connector ............................................................................................................... 19
Figure 19: Ethernet panel LED description ............................................................................................ 20
Figure 20 - Mechanical Specifications ...................................................................................................... 26
Table of Tables
Table 1 - Status LEDs................................................................................................................................... 6
Table 2 - RJ45 Ethernet port pin-out ....................................................................................................... 18
Table 3 - Operating Environment............................................................................................................. 21
Table 4 - Power Supply Specifications...................................................................................................... 21
Table 5 - Failsafe Relay Specifications...................................................................................................... 21
Table 6 – Wireless Standards supported .................................................................................................. 22
Table 7 - Radio Characteristics................................................................................................................. 22
Table 8 - Channel allocations for IEEE 802.11b/g................................................................................... 23
Table 9: Copper Port Specification........................................................................................................... 23
Table 10: Fiber Optic Port Specification.................................................................................................. 24
Table 11: Ethernet Ports - Copper Specifications ................................................................................... 24
Table 12: Ethernet Ports – Fiber Optic Specifications........................................................................... 25
Table 13 - Communication Standard Compliance .................................................................................. 25
Table 14 - Mechanical Specifications........................................................................................................ 26
Table 15 - IEC 61850-3 Type Tests ........................................................................................................... 27
Table 16 - IEEE 1613 Type Tests .............................................................................................................. 28
Table 17 - Environmental Type Tests....................................................................................................... 28
Table 18 - dBm to Watt Conversion Table............................................................................................... 31
5
2007 RuggedCom Inc. All rights reserved Rev100
1 Product Overview
1.1 Functional Overview
The RuggedWireless™ RS910W is an industrially hardened Wireless Serial/Ethernet De ice
Ser er that has been specifically designed to operate reliably in electrically harsh and climatically
demanding en ironments. The RS910W features a wireless LAN (WLAN) interface combined with
2 serial ports and/or 2 Fast Ethernet ports. The RS910W allows you to connect any RS-232/
422/485/fiber serial de ices at up to 230 kbps and/or connect Ethernet de ices for wireless access
and control ia an IEEE 802.11i wireless LAN.
1.2 Feature Highlights
•Serial De ice Ser er:
o2 fully compliant EIA/TIA RS485/RS422/RS232/fiber serial ports (software
selectable)
oDB9, RJ45 or ST fiber connectors
oBaud rates up to 230 kbps
oBuilt-in optional RS485 Termination
•Ethernet Ports:
o2 – Fast Ethernet ports (10/100BaseTX or 100 BaseFX)
oMultiple fiber connector types
6
2007 RuggedCom Inc. All rights reserved Rev100
1.3 RS910W Front Panel Description
Failsafe Relay Power Port
Ports 1 & 2
RS485/422/232
Serial
Or
Serial over Fiber
Ports 3 & 4
10/100Base-T
or
100Base-F
Or
10Base-FL
Port 9
Antenna #1
Power & Alarm
Port 9
Antenna #2
Figure 1 - RS91 W Front Panel Description
Status LED Colour Activity Comments
Power LED Green Solid Power On
Alarm LED Red Solid Alarm condition exists
Table 1 - Status LEDs
7
2007 RuggedCom Inc. All rights reserved Rev100
1.4 RS910W Bottom Panel Description
Failsafe Relay
Console Port
Power
Port
Chassis
Ground
Optional Din-Rail
Mounting Bracket
Figure 2 - RS91 W Bottom Panel Description
8
2007 RuggedCom Inc. All rights reserved Rev100
2 Installation
2.1 Din Rail Mounting
An optional DIN rail mounting bracket is a ailable for the RS910W. The figure below details
mounting instructions for the standard 1” DIN Rail.
Figure 3 - RS91 W DIN Rail Mounting
9
2007 RuggedCom Inc. All rights reserved Rev100
2.2 Power Supply Wiring and Grounding
2.2.1 AC Power Supply Wiring and Grounding
Figure 4 - RS91 W Power Supply Inputs
The RS910W AC power supply inputs should be connected as follows:
1. +/L should be connected to AC Line/Hot.
2. -/N should be connected to AC Neutral.
3. Surge Ground should be connected to the Chassis Ground ia a braided cable or other
appropriate grounding wire. Surge Ground is used as the ground conductor for all surge
and transient suppression circuitry internal to the unit.
4. Chassis Ground must be connected to the AC ground terminal.
NOTES:
1. Equipment must be installed according to the applicable country wiring codes.
2. All line-to-ground transient energy is shunted to the Surge Ground terminal. In cases
where users require the inputs to be isolated from ground, remo e the ground braid
between Surge and Chassis Ground. Note that all line-to-ground transient protection
circuitry will be disabled.
10
2007 RuggedCom Inc. All rights reserved Rev100
2.2.2 DC Power Supply Wiring and Grounding
Figure 5 - DC Power supply wiring and grounding diagram
The RS910W low oltage DC power supply features re erse polarity protection and dual
independent inputs. The latter feature allows the connection of two DC sources with the same
nominal oltage to pro ide redundant power supply inputs.
The RS910W DC power supply inputs should be connected as follows:
1. Connect to the DC inputs according to the polarity markings on the unit.
2. Surge Ground should be connected to the Chassis Ground ia a braided cable or other
appropriate grounding wire. Surge Ground is used as the ground conductor for all surge
and transient suppression circuitry internal to the unit.
3. Chassis Ground must be connected to the protecti e earth.
NOTES:
1. Equipment must be installed according to the applicable country wiring codes.
2. All line-to-ground transient energy is shunted to the Surge Ground terminal. In cases
where users require the inputs to be isolated from ground, remo e the ground braid
between Surge and Chassis Ground. Note that all line-to-ground transient protection
circuitry will be disabled.
Table des matières
Autres manuels RuggedCom Serveur
RuggedCom
RuggedCom RuggedServer RS400 Manuel utilisateur
RuggedCom
RuggedCom RuggedMC RMC30 Manuel
RuggedCom
RuggedCom RuggedWireless RS920W Manuel utilisateur
RuggedCom
RuggedCom RuggedServer RS910 Manuel utilisateur
RuggedCom
RuggedCom RuggedServer RS416 Manuel utilisateur
RuggedCom
RuggedCom RuggedWireless RS920W Manuel utilisateur
