Ruger RC1000S Manuel utilisateur
OPERATOR’S MANUAL
IMPROPER USE
OF THIS EQUIPMENT
CAN BE HAZARDOUS!
SERIAL NUMBER
RC1000S
All operators must read,
understand, and apply all
safety instructions before
operating this equipment.
David Round & Son, Inc.
Ruger Products Division
32405 Aurora Road
Cleveland, OH 44139
Phone: 440-248-4700
www.rugerequipment.com
For safety, one
copy of this manual
must be stored on
the equipment and
referred to by all
operators.
ii
Congratulations on your purchase of a standard design RC1000S Crane. You now own
one of the most versatile cranes in the market. In order to ensure many years of safe and
dependable service, please read this Operator’s Manual before using the equipment. If you
have any questions or need additional information, please contact us at:
Phone: 440-248-4700
Fax: 440-248-8544
www.rugerequipment.com
E-mail: [email protected]
Below is a list of standard accessories that you should have received with your RC1000S
• Operator’s Manual
• Swivel Hook with Safety Latch
• Pump Handle
Designers & Manufacturers of Hydraulic Load Lifting and Material Handling Equipment
iii
Contents
General Information .................................................................................... 1
Receiving and Pre-operational Instructions ............................................. 1
Receiving Procedure ............................................................................... 2-3
Insert Sheets ................................................................................................. 4-5
Maintenance Instructions ................................................................................. 6
Recommended Parts .................................................................................. 7-9
Operational Steps ................................................................................................. 10
Jack Inspection Check List ................................................................................. 11
Jack Service Instructions .......................................................................... 12
Lubrication ............................................................................................................ 13
Safety Tips for Using Ruger Cranes .................................................................... 14
Warranty Information ...................................................................................... 15-17
Designers & Manufacturers of Hydraulic Load Lifting and Material Handling Equipment
CAUTION
DO NOT remove this tag
GENERAL INFORMATION
1. Please include the Model and Serial Number when ordering parts. This information is provided to
you on the front cover of this manual. The Model and Serial Number can also be found on the Serial
Number tag on the unit located on the mast section of the equipment.
2. Ruger Parts Department can be reached at (440-248-4700), 9 AM to 5 PM EST. time, Monday through Friday
except for holidays.
3. All parts are FOB Solon, OH. Terms are Net 30. Minimum order is $50.00.
4. Quality at Ruger starts with raw materials which are inspected to insure our products will be of good quality
and free from defects. Each product is tested completely and rechecked before shipment.
RECEIVING AND PRE-OPERATIONAL INSTRUCTIONS
Upon receipt of this unit, visually inspect for damage that may have occurred during shipment and report any
damages to the carrier.
In accepting this shipment from Ruger Industries, Inc. the carrier has acknowledged receipt in good condition
and complete as shown on the Packing List and/or Bill of Lading.
Ruger Industries responsibility for this shipment has now ceased. Any shortages or damage must now be
resolved between the carrier and the receiver.
Ruger Industries will not be responsible for loss or damage when you give the transportation company a clear
receipt.
Inspect this material before accepting. DO NOT accept when damage or shortages are visible unless the carrier
makes a damage notation on your freight bill.
Look for and report concealed loss or damage to carrier with 48 hours and request inspection by the carrier.
This is absolutely necessary, otherwise, the transportation companies will not entertain any claim for loss or
damage. If the carrier will not make an inspection, then you should make an affidavit that you notified him/her (on
a certain date) and he/she failed to do so. This, with other papers, will properly support your claim.
Ruger Industries is willing to assist in every possible manner in collecting claims for loss or damage, but this
willingness on Ruger’s part does not include responsibility for collection of claims or assumption of cost of
replacement of damaged or lost materials.
1
2
RECEIVING PROCEDURESRECEIVING PROCEDURES
RECEIVING PROCEDURESRECEIVING PROCEDURES
RECEIVING PROCEDURES
BEFORE ACCEPTING DELIVERY FROM THE CARRIER
In accepting this shipment, the carrier has acknowledged receipt in good condition and complete
as shown on the Packing List and/or Bill of Lading.
RECEIVING INSPECTION CHECK LIST
Check wheels and casters - they should turn freely and be free of dents, cracks
and flat spots.
Check main frame components,legs, forks, booms, handles and sheet metal
for dents, cracks and misalignment.
Check wiring to assure it is securely connected and in good condition.
Check main structure bolts, nuts and pin retainers for tightness.
After visual inspection, make operational test to assure unit is functioning
properly.
Iseverything there? Check packing list to be sure optional equipment is there.
Make sure lifting chain is with crane. Be sure manual pump handle is there.
Paint finish - scratches and scrapes to painted surfaces incurred during
shipment are accepted as necessary evil. Costs of protective crating to protect
paint are so high that it's better to accept a few scrapes to the finish.
Check hoses, fittings and rams for hydraulic leaks.
Hydraulic leaks indicate loose or broken fittings, hoses etc. Hose
and tubing should be free of kinks and buckles.
Check chains and cables for breaks or obstructions.
Check batteries for cracks, leaks. Check electrolyte level.
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
√√
√√
√
3
RETURNED GOODSRETURNED GOODS
RETURNED GOODSRETURNED GOODS
RETURNED GOODS AA
AA
AUTHORIZAUTHORIZA
UTHORIZAUTHORIZA
UTHORIZATIONTION
TIONTION
TION
Packing Slip must accompany all returns.
CREDIT WILL ONLY BE ISSUED AT THE TIME OF
RETURNED GOODS AT THE FACTORY
1) Invoice Number
2) Date of Invoice
3) Serial Number
4) Carrier Name
5) Return Ship Date
6) Reason for Return
There will be a Restocking Charge for all returned purchases.
Customized units are not returnable and are non-refundable.
RECEIVING DOCK DELIVERIES
MONDAY THROUGH FRIDAY
8:00 A.M. TO 4:00 P.M. EST
EXCEPT HOLIDAYS
When calling for a RETURNED GOODS AUTHORIZATION number the following
information must be supplied:
RETURNED GOODS AUTHORIZATION number must be assigned
by the Ruger customer service department for approved returns. This
number must appear on all accompanying paperwork.
1000 lb. Capacity
Ideal for the automotive and truck markets
Boom can be mounted at 5 different
height positions
ACCESSORIES
Barrel Grip
Floor Lock
Steel or Polyurethane Wheels
RC1000S
Prices, Specifications, and Options are subject to Change
Without Notice.
All Ruger products are shipped F.O.B. Solon Ohio 44139
Unit Ships-NMFC #189240 - Class 85
Shipping Wt. 285 lbs
Maximum Value and Safety.
The RC1000S boom
reaches 40” out from ram
connecting point and lifts
1000 pounds.
Tested and exceeds
ANSI/ASME PALD-12C
standards.
Meets ANSI Z.535
STANDARD FEATURES
Meet Ruger’s engineering standards of 150% structural
overload of maximum rated capacity
Completely self-contained hydraulic system with single
action jack
Boom and hydraulics adjust to 5 height locations
Built-in hydraulic overload relief valve
(An original Ruger patent)
Needle type release valve permits pin-point control over
lowering and holding of the heaviest or lightest loads
Snatch hook
Phenolic casters with roller bearing wheels
4
VERSATILE
COMPACT
AFFORDABLE
RELIABLE
David Round & Son, Inc.
Ruger Products Division
32405 Aurora Road
Cleveland, OH 44139
Phone: 440-248-4700
www.rugerequipment.com
MODEL: RC1000S
VERSATILE
COMPACT
AFFORDABLE
RELIABLE
Certain models can be
shipped NEXT DAY.
NOTE:
Ruger can modify
any standard
dimension to meet
specific customer
needs.
PUMPING CYCLES
needed to raise boom
through full
travel : 90.
Model .................................................................... RC1000S
Max. Capacity .................................................... 1000 lbs
Overall Base Length ........................................... 75”
Overall Width ....................................................... 32 1/2”
Overall Height ...................................................... 78”
Width Between Legs ........................................... 24 1/2”
Boom Reach Retracted ...................................... 57 1/2”
Boom Reach Extended ...................................... N/A
Boom Height (lowest position) ........................... 40 1/2”
Boom Height (highest position) .......................... 117 1/2”
Ext. Boom Height (lowest position) ................... N/A
Ext. Boom Height (highest position) .................. N/A
Height of Legs ...................................................... 6”
Wheel Diameter-Load Wheels ............................ 5 ”
Wheel Diameter-Steering Wheels ....................... 4”
David Round & Son, Inc.
Ruger Products Division
32405 Aurora Road
Cleveland, OH 44139
Phone: 440-248-4700
www.rugerequipment.com
5
MAINTENANCE INSTRUCTIONSMAINTENANCE INSTRUCTIONS
MAINTENANCE INSTRUCTIONSMAINTENANCE INSTRUCTIONS
MAINTENANCE INSTRUCTIONS
BEFORE EACH USE -
Check the Hydraulic Jack for oil leakage.
Inspect the Safety Swivel Hook with Latch to ensure safe lifting of loads.
WEEKLY -
Check the Pins for excessive wear.
MONTHLY -
Check the Casters for excessive wear or uneven travel.
QUARTERLY -
Check all welded joints.
Serial No. Tag -
Found on the
mast of the
Crane.
6
...a better way to work with heavy loads
Email: [email protected]
Phone: 440-248-4700
Fax: 440-248-8544
David Round & Son, Inc.
32405 Aurora Road
Solon, Ohio 44139
www.davidround.com
NOTE: There is an overload relief valve built into the hydraulic system of every new Ruger Crane. This
safety valve is set at the factory, under measured loadings, and opens at about 10% over the rated
capacity, preventing the crane from lifting.
IF THE CRANE FAILS TO HOLD OR LIFT ITS RATED LOAD.... REMOVE THE CRANE FROM ALL
SERVICE WORK. Contact the factory Customer Service Department at 1-440-248-4700.
When calling the factory, please have your Model
and Serial Number ready, so we may better serve you.
1
20
17
32
31
30
29
28
27
26
25
24
23
22
21
40
39
15
16
8
19
4
9
8
9
5
6
7
10
11
12
13
14
34
35
36
37
2
3
38
18
RECOMMENDED PRECOMMENDED P
RECOMMENDED PRECOMMENDED P
RECOMMENDED PARAR
ARAR
ARTSTS
TSTS
TS
33
7
Table des matières
Autres manuels Ruger Matériel de construction
