Ruark Audio R3 Manuel utilisateur
R3 Compact Music System
R3 Comapct Music System
User guide
EN
Important information about
the AC power adapter
Model DYS836-140285W-K
Input 100-240V~50/60Hz 1.0A MAX
Output 14.0V 2.85A
Class II, Efciency Level VI
• This AC adapter is for audio & video equipment use
only and complies with IEC 60065 safety standard.
• The supplied 3-pin plug adapter complies with
BS 1363-1 and the supplied 2-pin plug adapter
complies with EN 50075.
• Before using the AC adapter, ensure the mains voltage
is within the rated supply voltage range.
• The output power taken from this AC adapter must not
exceed its rated output power.
• DO NOT disassemble or modify the AC adapter.
• DO NOT drop or throw the AC adapter.
• The external exible cable cannot be replaced and if
the cord is damaged, the AC adapter must be replaced.
• DO NOT expose the AC adapter to dripping or
splashing water, and do not place objects lled with
liquids, such as vases, on or near the device.
• DO NOT leave the AC adapter in a hot location, such as
near re or under strong sunlight.
• Unplug the AC adapter during lightning storms or
when unused for long periods of time to prevent
damage.
• Ensure that the AC adapter is readily accessible when
plugged into the mains. If an abnormal condition occurs
while using it, immediately turn off the connected
device and disconnect the mains adapter from the
mains.
• DO NOT dispose this AC adapter as general household
waste or unsorted municipal waste. Dispose of it
according to local regulations.never cover ventilation
openings on the device.
Safety and regulatory
information
●Read this user guide and follow all instructions, it will help you set up
and operate your product properly.
●Heed all warnings and keep this user guide for future reference.
●Do not attempt to use a damaged device as this could result in a
dangerous electric shock.
●Do not open the unit or remove any panels to expose the electronics.
No user serviceable parts inside.
●Refer all servicing to qualied service personnel. Servicing is required
when the device has been damaged in any way, such as when any
power cord, or power plug is damaged, liquid has been spilled or
objects have fallen into the device, the device has been exposed to
rain or moisture, does not operate normally, or has been dropped.
●This device is intended to be operated ONLY from the AC voltages
listed on the back panel or included AC mains adapter. Operation from
voltages other than those indicated may cause irreversible damage to
the device and void the product warranty.
●Ensure that the mains plug or mains connector into the unit is readily
accessible in case disconnection from the mains is required.
●The AC mains adapter, mains plug, or mains connector must be
removed from the socket to completely disconnect the system from
AC mains power.
●Do not place any naked ame sources, such as lighted candles, on or
near the device. Do not install near any heat sources such as radiators,
stoves, or other devices that produce heat.
●Avoid exposure to extreme heat or cold.
●Only use attachments/accessories specied for this device. Make no
modications to the system or accessories. Unauthorised alterations
may compromise safety, regulatory compliance, and system
performance.
●Only use the supplied aerial or an approved replacement.
●To reduce the risk of re or electrical shock, do not expose the device
to rain or moisture. Do not expose this device to dripping or splashing,
and do not place objects lled with liquids, such as vases, on or
near the device. As with any electronic products, use care not to spill
liquids into any part of the system. Liquids can cause a failure and/or
a re hazard.
●Disconnect this device from AC mains power during lightning storms
or when unused for long periods of time to prevent damage to this
device.
●To prevent risk of re or electric shock, avoid overloading AC mains
power outlets or extension cords.
●Long-term exposure to loud music may cause hearing damage. It is
best to avoid extreme volume when using headphones, especially for
extended periods.
●Do not install this device in a conned space. Always leave a space
of at least 10cm around the device for ventilation and ensure that
curtains or other objects never cover ventilation openings on the
device.
This device is labelled in accordance with European Directive
2012/19/EU concerning waste electrical and electronic
equipment. This symbol indicates that the product or
associated batteries should not be disposed of as general
household waste. As with any electrical equipment, please
dispose of it according to local regulations.
CE COMPLIANCE INFORMATION
This product conforms to all EU Directive requirements as applicable by
law. Hereby, Ruark Audio, declares that this device complies with the
essential requirements and other relevant provisions of the European
Radio Equipment Directive 2014/53/EU.
You can download the full CE Declaration of Conformity at
www.ruarkaudio.com/doc/R3doc.pdf
EN
Specifications
Amplifiers and drivers
2 × 75mm Ruark NS+ drivers
30W Class AB power amplier
Enhanced digital 3D audio processor
Tuner
DAB, DAB+ and FM Tuner with RDS
75 Ohm F-type DAB/FM aerial connector
CD player
CD, CD-ROM, CD-R/RW
MP3, WMA, AAC up to 320 kbit/s
Digital audio
Internet radio, Spotify Connect, Amazon Music, Deezer,
TIDAL, UPnP™ DLNA
Wi-Fi 802.11a/b/g/n supports WEP, WPA & WPA2 security
MP3, WMA, AAC, FLAC, WAV
Bluetooth: V4.0 SBC, AAC, A2DP, aptX
Inputs and outputs
Digital optical input (TOSLINK) 24-bit 192kHz
Line input (RCA) 2.3Vrms max
Line out (RCA) 2.0Vrms
Ethernet (RJ45)
USB 2.0, 5W (5V 1A)
3.5mm stereo jack headphone output
Power
AC mains adapter input: 100-240V AC 50/60Hz 1A
AC mains adapter output: 14V DC 2.85A
Nominal consumption: 5W
Standby consumption: 2W
Remote batteries: 2 x 1.5V AAA
Physical
H167 x W420 x D220mm (H6.6 x W16.5 x D8.7in)
5.3kg (11.7lbs)
Specication and design subject to modication without
notice.
Ruark Audio assumes no responsibility for any errors that
may appear in this manual and the information contained
in it may change without notice.
Troubleshooting
For help with your product, please refer to the FAQ
(Frequently Asked Questions) page in the support area of
our website.
For more information visit www.ruarkaudio.com/support.
What’s in the box
Ensure that all parts listed below are in
the box.
If any part is missing, do not use the R3
and contact us directly if purchased in
the UK, or your Ruark Audio dealer if
purchased outside the UK.
1. R3
2. Remote control
3. Remote batteries (2x 1.5V AAA)
4. Antenna spanner
5. Telescopic antenna
6. AC power adapter
7. Plug(s) for AC power adapter*
8. Quick start guide
If possible, please retain the carton and
all packaging materials.
1
3
4
5
6
8
72
* The number and type of plug adapters
supplied will vary according to region.
EN
Controls
9. – STANDBY
10. CONTROL KNOB / SELECT
Rotate to adjust volume from a Now Playing screen
Rotate to browse menus, tracks or station lists*
Press to SELECT
11. – press to skip to next station or track, press
and hold to fast forward. In standby, press to
increase display brightness.
12. – press to skip to previous station or track,
press and hold to rewind. In standby, press to
decrease display brightness.
13. PRESET – press to recall a saved station or
playlist, press and hold for two seconds to save a
station or playlist
14. SOURCE – press to change audio source
15. – press to play/pause a track or mute audio
inputs and radio
16. MENU – press to view the menu
17. BACK – press to return to the previous menu or list
screen
18. INDICATOR LIGHT
Indicates your music system is on and ashes
when Bluetooth is ready to pair or when using the
remote.
*You can also press or to browse menus, tracks,
sources or station lists.
How long you press a key is important
Press = tap or press and immediately release
Press and hold = press and release after two seconds
9
11
12
13
14
10
16
17
15
18
Remote
19. – STANDBY
20. SOURCE – press to change audio source.
21. INCREASE VOLUME
22. / SELECT – press to play/pause a track,
mute/unmute radio or to select a menu item.
23. – press to skip to previous station or
track, press and hold to rewind. In standby,
press to decrease display brightness.
24. – press to skip to next station or track,
press and hold to fast forward. In standby,
press to increase display brightness.
25. DECREASE VOLUME
26. BACK – press to return to the previous
menu or list screen.
27. MENU – press to view the menu.
28. PRESET – press to recall a saved station
or playlist, press and hold for two seconds to
save a station or playlist.
29. PRESET 1
30. PRESET 2
31. PRESET 3
+
-
+
-
21
25
19
26
29
31
30
23
20
22
27
24
28
EN
40
39 41
42
46
45
44
43
343332 35 36 3837
Overview
32. Remote receiver
33. Ambient light sensor
34. CD eject button
35. OLED display
36. Controls
37. CD loading slot
38. 75mm Ruark NS+ drivers
39. USB C (5V 1A)
40. Optical input
41. Ethernet
42. DAB-FM antenna
43. DC power input (14V 2.85A)
44. Line in (phono)
45. Line out (phono)
46. Headphone out (3.5mm jack)
Getting started
1 Insert batteries into remote control
2 Connect the aerial
Fit the telescopic aerial to the DAB/FM antenna socket
on the back of your R3 and gently tighten it using the
supplied spanner.
3 Connect to AC mains power
Fit the correct plug for your region to the mains adapter;
it will “click” into place. Connect the mains adapter to the
DC power socket on the back of your R3, then connect it
to the mains socket.
4 Switch on
Press to turn the R3 on.
5 Select language
Rotate the CONTROL KNOB until your preferred choice
is highlighted, then press SELECT.
6 Setup wizard
Follow the setup wizard to congure the clock and
connect to your network.
To start the setup wizard, rotate the CONTROL KNOB to
highlight YES and then press the knob to SELECT.
If you choose NO, your R3 will start without conguring
the time/date and network settings.
7 Select a source
When your setup is complete, your R3 will display
a menu with a list of the available sources. Use the
CONTROL KNOB to choose a source and press
SELECT.
8 Enjoy your music!
App control
You can also control your R3 using UNDOK. Find it on
the Apple/Android app store.
For more information visit www.ruarkaudio.com/app
EN
Common functions
Switch on and to standby
Press STANDBY to turn your music system on. Press
again to switch to standby.
Now Playing screens
Unless you’re adjusting a setting, the screen will look
similar to the example below with the clock above and
station/track/album/artist information below.
The on-screen icons below are shown when their
respective functions are active.
Alarm Sleep timer
Shufe Repeat
Menu screens
The menus enable you to set the various options
such as adjusting the bass and treble. To change a
setting, press MENU to display the list of available
options, rotate the CONTROL KNOB to highlight the one
you wish to change, then press the knob to conrm your
selection.
System
Audio
Network
Date and time
Brightness
Language
Browsing menus, track and station lists
To change settings – press MENU
To scroll through options – rotate CONTROL KNOB
To select option – press CONTROL KNOB
To exit menu – press MENU or wait for a few seconds
To return to the previous menu/list – press BACK
How long you press a key is important
Press = tap or press and immediately release
Press and hold = press and release after two seconds
Table des matières
Langues :
Autres manuels Ruark Audio Système stéréo
