RTS XCP-16-DB9-T Mise à jour du firmware
July 2006 Rev E
Breakout Panel
Resource Guide
includes:
XCP-955
XCP-32-DB9
XCP-16-DB9-T
XCP-48-RJ45
XCP-48-TELCO
XCP-40-DB9
XCP-40-RJ11
XCP-24
XCP-24-USOC
XCP-ADAM-MC
LIT000061000
Table
of
Contents
Breakout Panel Introduction ...................................................................................................................... 1
XCP-955 - 8800303674 .............................................................................................................................. 3
XCP-32-DB9 - 9000-7810-000 ................................................................................................................... 7
XCP-16-DB9-T - 9000-7837-000 ............................................................................................................... 9
XCP-48-RJ45 - 9000-7809-000 ................................................................................................................ 11
XCP-48-Telco - 9000-7822-000 ............................................................................................................... 13
XCP-40-DB9 - 9000-7515-000 ................................................................................................................. 19
XCP-40-RJ11 - 9000-7494-000 ................................................................................................................ 21
XCP-24 - 9000-7559-000 .......................................................................................................................... 23
XCP-24-USOC - 9000-7559-001 .............................................................................................................. 27
XCP-ADAM-MC - 9002-7514-100 ........................................................................................................... 31
1
CHAPTER 1
Breakout Panel Introduction
Breakout Panels provide a convenient way of expanding the port capacity of an ADAM intercom system. Currently, there are
seven breakout panels for use with the AIO cards: XCP-32-DB9, XCP-16-DB9-T,XCP-48-RJ45, XCP-48-Telco, XCP-40-
DB9, XCP-40-RJ11, XCP-955, XCP-24, and the XCP-24-USOC.
Installation
Requirements
•Have the new ADAM power supply installed (p/n - 9020-7515-001).
•In a single frame system, have the Master Controller firmware 9.22.0 or higher installed.
•In a multi-frame system have:
the Peripheral Controller firmware 10.13.x or higher installed
the DBX firmware 1.13.0 or higher installed.
IMPORTANT!!! Use the following instructions for you initial setup of an AIO-16 card. If you do not follow these directions,
the AIO-16 card may not work properly.
Breakout Panel Introduction
2
To install the AIO-16 card for the first time, do the following:
1. Gently insert the AIO-16 card into the appropriate ADAM slot.
2. Lightly tighten down the AIO-16 card.
3. Carefully attach the backcard (MDR or SCSI,) to the AIO-16 card from the back of the ADAM. Verify it is properly seated
against the AIO-16 card and is sitting firmly in the system.
4. Tight the backcard to the frame
5. Fully tighten down the AIO-16 from the front of the system.
NOTE: Once you have done this, you do not have to repeat this everytime.
6. Attach the desired breakout panel to the AIO-16’s backcard connector.
TABLE 1. MDR backcard and connector.
TABLE 2. SCSI backcard and connector
3
CHAPTER 2
XCP-955
8800303674
The XCP-955 is the 25-port RJ-11 breakout panel with SCSI
connector for the ADAM.
Specifications
Dimensions:
18.98” (482mm) L x 1.69” (43mm) H x 0.55” (104mm) D
Weight:
1.6 lb (.725 kg)
J28
DATA
J27
AUDIO DESTINATION
J26
AUDIO SOURCE
XCP-955
XCP-955
RTS SYSTEMS
RJ-12 Connector
Pin 1 Keypanel Data -
Pin 2 Audio Out +
Pin 3 Audio In +
Pin 4 Audio In -
Pin 5 Audio Out -
Pin 6 Keypanel Data +
XCP-955 8800303674
4
Telco Backcard - Telco Connector - J26
Pin
Number Port Function
1 1 Audio From Matrix +
26 1 Audio From Matrix -
2 2 Audio From Matrix +
27 2 Audio From Matrix -
3 3 Audio From Matrix +
28 3 Audio From Matrix -
4 4 Audio From Matrix +
29 4 Audio From Matrix -
5 5 Audio From Matrix +
30 5 Audio From Matrix -
6 6 Audio From Matrix +
31 6 Audio From Matrix -
7 7 Audio From Matrix +
32 7 Audio From Matrix -
8 8 Audio From Matrix +
33 8 Audio From Matrix -
9 9 Audio From Matrix +
34 9 Audio From Matrix -
10 10 Audio From Matrix +
35 10 Audio From Matrix -
11 11 Audio From Matrix +
36 11 Audio From Matrix -
12 12 Audio From Matrix +
37 12 Audio From Matrix -
13 13 Audio From Matrix +
38 13 Audio From Matrix -
14 14 Audio From Matrix +
39 14 Audio From Matrix -
15 15 Audio From Matrix +
40 15 Audio From Matrix -
16 16 Audio From Matrix +
41 16 Audio From Matrix -
17 17 Audio From Matrix +
42 17 Audio From Matrix -
18 18 Audio From Matrix +
43 18 Audio From Matrix -
19 19 Audio From Matrix +
44 19 Audio From Matrix -
20 20 Audio From Matrix +
45 20 Audio From Matrix -
21 21 Audio From Matrix +
46 21 Audio From Matrix -
22 22 Audio From Matrix +
47 22 Audio From Matrix -
23 23 Audio From Matrix +
48 23 Audio From Matrix -
24 24 Audio From Matrix +
49 24 Audio From Matrix -
Telco Backcard - Telco Connector - J27
Pin
Number Port Function
11AudioToMatrix+
26 1 Audio To Matrix -
22AudioToMatrix+
27 2 Audio To Matrix -
33AudioToMatrix+
28 3 Audio To Matrix -
44AudioToMatrix+
Telco Backcard - Telco Connector - J26
Pin
Number Port Function
5
Specifications
29 4 Audio To Matrix -
5 5 Audio To Matrix +
30 5 Audio To Matrix -
6 6 Audio To Matrix +
31 6 Audio To Matrix -
7 7 Audio To Matrix +
32 7 Audio To Matrix -
8 8 Audio To Matrix +
33 8 Audio To Matrix -
9 9 Audio To Matrix +
34 9 Audio To Matrix -
10 10 Audio To Matrix +
35 10 Audio To Matrix -
11 11 Audio To Matrix +
36 11 Audio To Matrix -
12 12 Audio To Matrix +
37 12 Audio To Matrix -
13 13 Audio To Matrix +
38 13 Audio To Matrix -
14 14 Audio To Matrix +
39 14 Audio To Matrix -
15 15 Audio To Matrix +
40 15 Audio To Matrix -
16 16 Audio To Matrix +
41 16 Audio To Matrix -
17 17 Audio To Matrix +
42 17 Audio To Matrix -
18 18 Audio To Matrix +
43 18 Audio To Matrix -
Telco Backcard - Telco Connector - J27
Pin
Number Port Function
19 19 Audio To Matrix +
44 19 Audio To Matrix -
20 20 Audio To Matrix +
45 20 Audio To Matrix -
21 21 Audio To Matrix +
46 21 Audio To Matrix -
22 22 Audio To Matrix +
47 22 Audio To Matrix -
23 23 Audio To Matrix +
48 23 Audio To Matrix -
24 24 Audio To Matrix +
49 24 Audio To Matrix -
Telco Backcard - Telco Connector - J28
Pin
Number Port Function
1-8 1-8 Data +
25-33 1-8 Data -
9-16 9-16 Data +
34-41 9-16 Data -
17-24 17-24 Data +
42-49 17-24 Data -
Telco Backcard - Telco Connector - J27
Pin
Number Port Function
XCP-955 8800303674
6
Autres manuels pour XCP-16-DB9-T
1
Ce manuel convient aux modèles suivants
9
Table des matières
Autres manuels RTS Système d'interphone
RTS
RTS WM300 Manuel d'instructions
RTS
RTS BTR-240 Manuel utilisateur
RTS
RTS WKP-1 Manuel utilisateur
RTS
RTS MC-ADAM Instructions d'installation
RTS
RTS XCP-955 Guide de démarrage rapide
RTS
RTS KP-32 Manuel utilisateur
RTS
RTS BP-6000 Manuel utilisateur
RTS
RTS TIF-2000A Manuel utilisateur
RTS
RTS BP-319 Manuel utilisateur
RTS
RTS EKP-832 Manuel utilisateur
RTS
RTS User Station MCE-325 Manuel utilisateur
RTS
RTS SSA-324 Manuel utilisateur
RTS
RTS DKP-12 Manuel utilisateur
RTS
RTS TIF-4000 Frame Manuel utilisateur
RTS
RTS SAP612 Manuel utilisateur
RTS
RTS Cronus Mode d’emploi
RTS
RTS SSA-424 Manuel utilisateur
RTS
RTS KP95 Manuel utilisateur
RTS
RTS XCP-ADAM-MC Guide de démarrage rapide
RTS
RTS Zeus III Manuel utilisateur
