Royal Sovereign ARP-5008 Manuel utilisateur
Royal Sovereign International, Inc
PORTABLE AIR CONDITIONER
Página en Español 13
Page en Français
25
Read and retain these instructions for future reference
ARP-5008/5010
OWNER’S MANUAL
PORTABLE AIR CONDITIONER
PORTABLE AIR CONDITIONER
ARP-5008/5010
INTRODUCTION
Thank you for choosing Royal Sovereign to provide you and your family with all of the “Home Comfort” requirements for your home, apartment, or office. This Portable Air
Conditioner can be set-up in just minutes and can be easily moved from room to room. It is a multi-functional room air comfort system that offers you Air Conditioning,
Dehumidification and Air Circulation modes. This manual will provide you with valuable information necessary for the proper care and maintenance for your new appliance.
Please take a few moments and read the instructions thoroughly. If properly maintained, your appliance will give you many years of troublefree operation.
Page
Safety Awareness 4
Identification Of Parts 5
Appearance and Function of Control Panel 6
Appearance and Function of Remote Controller
6
Introduction 7
Installation 9
Maintenance 9
Troubleshooting 10
Technical Specifications 11
Warranty 12
Página en Español 13
CONTENTS
4
SAFETY AWARENESS
Electrical Specifications and Power Cord
Check to ensure that the electrical service being used is adequate for the model you’ve chosen. The electrical rating of your new
air conditioner is defined on the serial plate of the unit. Please refer to the rating when checking electrical requirements to ensure
they meet the electrical codes of your location.
have a qualified electrician install the proper outlet.
• Do not use this unit with any extension cords or adapter plugs.
General Use
ARP-5008/5010
5
NAME OF PARTS
1. Rear cover 2. Air inlet 3. Front cover 4. Operation panel 5. Castor 6. Power line 7. Air inlet
ACCESSORIES
1
2
3
5
6 7
4
Fig.1
Fig.2
side view front view Rear view
Parts
PARTS NAME portable air conditioner mounting board
QTY/SET 1 1 1 1 1
After unpacking, please check whether the above-mentioned accessories are included, and check their purposes in the installation introduction in this manual.
6
1
1
2
2
3
3
4
4
6
5
5
6
6
7
Fig.3
Fig.4
APPEARANCE AND FUNCTION OF CONTROL PANEL
1. POWER button
2. TEMPERATURE+ button
3. TEMPERATURE- button
5. OPERATION MODE button
6. FAN SPEED ADJUSTMENT button
7.TIMER ON/OFF button
APPEARANCE AND FUNCTION OF REMOTE CONTROLLER
1. SPEED button
Press this button to select high or low speed
2. TEMP + button
Use this button to turn the temperature higher
3. MODE button
Press this button to select options: Fan, Cooling, Dehumidify
4. TIMER button
5. TEMP - button
Use this button to turn the temperature lower
6. POWER button
Press this button to turn the machine ON/OFF
ARP-5008/5010
7
INTRODUCTION
Before starting operations in this section:
Before using
Notice:
Operation temperature range:
Maximum cooling Minimum cooling
℉ ℃ ℃
Cautions for cooling and dehumidifying operations:
Conduct a Power Plug Check:
Fig.5 Fig.5a
Fig.6
8
Temperature Settings: Celsius to Fahrenheit (or Fahrenheit to Celsius)
Cooling operation
℉-90℉/16-31℃)
Dehumidifying operation
Fan operation
Timer operation
Timer ON setting:
Timer OFF setting
Drainage
Internal Tank Water Full Alarm Function
The inner water tank in the air conditioner has one water level safety switch, it controls water level. When the water level reaches an anticipated height, the water full indicator lamp
Continuous Drainge
ARP-5008/5010
9
INSTALLATION
Installation Explanations:
Introduction to Exhaust Hose Installation
Temporary installation
Window Slider Kit Installation
the window slider on the inside edge of the window. Adjust the window slider to the width of the
MAINTENANCE
Declaration:
1.Air Filter
If the air filter becomes clogged with dust/dirt, the air filter should be cleaned once every two weeks.
Dismounting
Open the air inlet grille and take off air filter.
Cleaning
℉/40℃
• Mounting
Put the air filter into the inlet grille, replace the components as they were.
2.Cleaning Air Conditioner Surface
First clean the surface with a neutral detergent and wet cloth, and then wipe it with a dry cloth.
Fig.10
Fig.7
30cm
30cm
drain
Fig: 9
Fig: 9a
Fig.8
10
TROUBLESHOOTING
Problem Possible Suggested Remedies
Unit does not start
when pressing
power button
Unit does not start when pressing power button. Check and reset the power plug. Wait 3 minutes and try to run
the unit again.
Water full indicator lamp blinks, and water tank is full.
Reset the temperature.
Reset the temperature.
Not cool enough
The doors or windows are not closed. P
free of curves as possible to avoid bottlenecks .
There are heat sources inside the room. Check and remove any obstacles obstructing air discharge.
Temperature setting is too high. Reset the temperature.
Air inlet is blocked. Clean the air inlet.
Noisy
The ground is not level or not flat enough. Place the unit on a flat, level ground if possible
The sound comes from the flowing of the refrigerant inside the air conditioner. It is normal.
E0 Code
Room temperature sensor failed. Replace room temperature sensor
E2 Code
Water tank full. Please empty the water tank.
Autres manuels pour ARP-5008
1
Ce manuel convient aux modèles suivants
1
Table des matières
Langues :
Autres manuels Royal Sovereign Climatiseur portable
