Rosewill RC-301 Manuel utilisateur

2-Port Serial PCI Adapter RC301

User Manual

2-Port Serial PCI Adapter RC301

Overview

This PCI I/O card is a dual RS232 port controller with PCI bus interface and uses an all-in-

one solution from NeMos Technology, which provides superior performance and unmatched

data transfer rates. The most advanced feature is it uses of a single interrupt, which is set

automatically by the host system and share among all on-board I/O ports and supports printer

interface as well as PS2, EPP & ECP modes.

Features

• Chipset: NetMos Nm9835

• OS power: Single 5V operation

• Bus: PCI 2.1s 32bit, 33MHz

• Data Transfer Rate: 1Mbytes/s (serial port)

• Selectable receive trigger levels

• PCI compatible Dual UART

• Modem control signals

• On chip oscillator

• 16Byte transmit-receive FIFO (UART)

• Software programmable mode selects

• Programmable baud rate generator

• Support plug & play features and makes installation fast and easy.

• Supports Windows98, Windows95, Windows2000 & Windows NT 4.0.

Installing the PCI I/O controller card into your computer

1. Turn off your computer and all external devices connect it.

2. Remove the computer’s cover. Refer to your computer user’s manual for more details.

3. Find an available PCI slot and remove the metal bracket. Save the bracket screw for later

use.

4. Align the PCI I/O controller horizontally with respect to the PCI slot and insert it into the

slot ﬁrmly and evenly. Take care not to force it into the slot. Once you have properly

positioned the PCI I/O controller card into the slot, fasten it to the computer case with the

bracket screw you have saved.

5. Replace the computer’s cover.

6. Turn your computer on. You are now read to install the driver!

Driver Installation

Windows 95/98/2000/XP

Once the PCI I/O card is installed and the computer is restarted, Windows will detect the board

User Manual

2-Port Serial PCI Adapter RC301

and attempt to install driver for it.

1. Start Windows 95/98/2000/XP

2. The“Update Device driver Wizard” will appear, informing you that it has found a “PCI I/O

Card”. Click the “Next” button.

3. Click “Other Location” for Windows 95 or “Specify a location” for Windows 98 to install the

driver.

4. Insert the driver CD in CD-ROM drive (D) and click on the “Browse” button.

5. Windows 98/95/2000 will automatically locate the driver in the driver diskette. Click the

User Manual

2-Port Serial PCI Adapter RC301

“OK” button to continue.

6. Click on the ﬁnish button to start copying ﬁles from driver diskette.

7. Windows 98/95/2000 will automatically restart in order to update the hardware

conﬁguration.

8. Once Windows 98/95/2000 has restarted, you can now connect your external devices to

the PCI I/O card. To install the driver for the external devices, please refer to the external device

user’s manual.

Windows NT 4.0

Make sure Windows NT 4.0 is properly installed into your system ﬁrst.

1. Start Windows NT.

2. Insert Windows NT 4.0 driver diskette (disk 2) into the ﬂoppy drive.

3. Select “RUN” option in Windows NT.

4. At the “RUN” option, click on the“Browse” button.

5. At the Browse for Folder window:

Select “Floppy (A)”

Double click on the winnt folder

Select NetMosXXX drivers.exe

Click on the Open button

6. Finally, click the“OK” button

7. Follow the instructions to ﬁnish up the driver installation. Your system will automatically

User Manual

2-Port Serial PCI Adapter RC301

restart in order to complete the driver installation.

Installing DOS Driver

Copy “NMDOSIN.EXE” to your hard disk and run “NMDOSIN.EXE”

Update Drivers

Please visit this website: http:/www.netmos.com/for all the latest drivers for your PCI I/O card.

Thank you for purchasing Rosewill Product.

Please register your product at www.rosewill.com for complete warranty information and future

support for your product.

Table des matières

Autres manuels Rosewill Carte PCI

Rosewill

Rosewill RC-110 Manuel utilisateur

Rosewill

Rosewill RC-302 Manuel utilisateur

Rosewill

Rosewill RC-302E Manuel utilisateur

Rosewill

Rosewill RNX-N300 Manuel utilisateur

Rosewill

Rosewill RC303 Manuel utilisateur

Rosewill

Rosewill RC-300 Manuel utilisateur

Rosewill

Rosewill RC304-E Manuel utilisateur

Rosewill

Rosewill RNX-N150PCe Manuel utilisateur

Rosewill

Rosewill RC-510 Manuel utilisateur

Rosewill

Rosewill RC-301EU Manuel utilisateur

Rosewill

Rosewill RC-401 Manuel utilisateur

Rosewill

Rosewill RSV-S4-6G Manuel utilisateur

Rosewill

Rosewill SATA 150 RAID 2 Port PCI Host RC201 Manuel utilisateur

Rosewill

Rosewill RNX-N150PCe Manuel utilisateur

Rosewill

Rosewill RC-100 Manuel utilisateur

Rosewill

Rosewill RNX-N250PC2 Manuel utilisateur

Rosewill

Rosewill RC-20003 Manuel utilisateur

Rosewill

Rosewill RC500 Manuel utilisateur

Rosewill

Rosewill RC302 Manuel utilisateur

Rosewill

Rosewill RC210 Manuel utilisateur

Rosewill

Rosewill RC601 Manuel utilisateur

Rosewill

Rosewill RC-301E Manuel utilisateur

Rosewill

Rosewill RNX-N250PC2 Manuel utilisateur

Rosewill

Rosewill RC501 Manuel utilisateur

Manuels Carte PCI populaires d'autres marques

ERMA

ERMA SSI 1417 Manuel utilisateur

SIIG

SIIG CyberSerial Dual PCI Instructions de montage

Moxa Technologies

Moxa Technologies CP-102E Manuel utilisateur

I-Bus

I-Bus IBC2602 Manuel utilisateur

Exsys

Exsys EX-60102 Manuel utilisateur

Chelsio Communications

Chelsio Communications T5 Series Manuel utilisateur

Conrad Electronic

Conrad Electronic 97 46 71 Manuel utilisateur

Micro Innovations

Micro Innovations USB650A Manuel utilisateur

KTI Networks

KTI Networks KF-310 Manuel utilisateur

Asus

Asus SpaceLink WL230 Manuel utilisateur

SIIG

SIIG SC2475 Manuel utilisateur

TRENDnet

TRENDnet TEW-703PI Manuel utilisateur

Belkin

Belkin F5D7000F Manuel utilisateur

Pericom

Pericom PI7C7100 Manuel utilisateur

ADLINK Technology

ADLINK Technology cPCI-3548 Manuel utilisateur

Digium

Digium TE200 Series Manuel utilisateur

Allo.com

Allo.com 2nd Gen E1/T1/J1 Manuel utilisateur

Western Digital

Western Digital FireWire PCI Adapter Manuel utilisateur