Rosewill RC401-EX Manuel utilisateur

10/100/1000Mpbs PCIe LAN Card RC401-EX

User Manual

10/100/1000 PCIe LAN Card RC401-EX User Manual

1. Introduction

This PCI Express Host Adapter (or ExpressCard) can upgrade your desktop or Notebook computer to have RJ-45 Port

and support Gigabit Ethernet 10Mbps (half-duplex), Ethernet 20Mbps (full-duplex), Fast Ethernet 100Mbps (half-duplex),

Fast Ethernet 200Mbps (full-duplex), Gigabit 1000Mbps (full-duplex) and Gigabit 2000Mbps (full-duplex) transfer rate It

comes with drivers for Windows.

1.1. Features

1.1.1. PCIe & ExpressCard Interface

zCompliant with PCI Express Specification, revision 1.0a.

zlane 2.5Gbps PCI Express host interface.

zLow Profile PCI Form Factor (for PCIe Host only).

1.1.2. 1000Base-T Gigabit Ethernet

zFully compliant with IEEE 802.3 (10Base-T Ethernet), IEEE 802.3u (100Base-TX Fast Ethernet), IEEE 802.3z

(1000Base-T Gigabit Ethernet).

zSupports Ethernet 10Mbps (half-duplex), Ethernet 20Mbps (full-duplex), Fast Ethernet 100Mbps (half-duplex),

Fast Ethernet 200Mbps (full-duplex), Gigabit 1000Mbps (full-duplex) and Gigabit 2000Mbps (full-duplex).

zRJ-45 Port offer high speed transmission over CAT 5 UTP cable.

zGreen LED indicator for 1000 Mbps.

zYellow LED indicator on PCI-e card for Link / ACT (Tx / Rx) or Red LED indicator on Notebook ExpressCard for

Link / ACT (Tx / Rx).

zAuto-Negotiation with Next page capability.

zSupports pair swap/polarity/skew correction.

zCrossover Detection & Auto-Correction.

zWake-on-LAN and remote wake-up support.

zMicrosoft® NDIS5 Checksum Offload (IP, TCP, UDP) and largesend offload support.

zSupports Full Duplex flow control (IEEE 802.3x).

zSupports IEEE 802.1Q VLAN tagging.

z8K Transmit FIFO and 64K Receive FIFO support.

zSupports power down/link down power saving.

zCompatible with Windows 2000, 2003, XP and VISTA

10/100/1000 PCIe LAN Card RC401-EX User Manual

1.2. Package Contents

zGigabit LAN Host Adapter

zThis User’s Manual

zDriver CD

zLow profile bracket

2. Software Installation

2.1. Windows 2000 installation

1.Insert Host Card into an available PCIe slot (or ExpressCard slot).

2.Windows will display the Found New Hardware Wizard, “Ethernet controller”, Click “Next”.

3.Select “Search for a suitable driver for my device (Recommended)” and Click “Next”, and make sure the Driver

CD in your CD-ROM/DVD.

4.Under “Specify a locations” insure that is only checked, and click “Next”.

5.Type in E:\ (If your CD-ROM/DVD is E:\) and click “Browse”.

6.Points specify a location, example E:\1000_GigaNet\Marvell_Yukon\ Windows \WIN2000, and click “OPEN” then

“OK”.

7.When the wizard indicates that it found a driver for the device click “Next”. Then click “Finish”.

2.2. Windows 2003 Server installation

1. Insert Host Card into an available PCIe slot (or ExpressCard slot).

2. Windows will display the Found New Hardware Wizard, “Ethernet controller”. Select “Install from a list or

specific location (Advanced)”, and click “Next”, and make sure the Driver CD is in your CD-ROM/DVD.

3. Select “Search for the best driver in these locations”, and check “Include this location in the search:”

uncheck the other boxes.

4. Type in E:\ (If your CD-ROM/DVD is E:\) and click “Browse”.

5. Points specify a location, example E:\1000_GigaNet\ Marvell_Yukon\ Windows \WIN2003, and click “OPEN” then

“OK”.

6. When the wizard indicates that it found a driver for the device click “Next”. Then click “Finish”.

2.3. Windows XP Server 32bit installation

1.Insert Host Card into an available PCIe slot (or ExpressCard slot).

2.Windows will display the Found New Hardware Wizard, “Ethernet controller”. Select “Install from a list or specific

location (Advanced)”, and click “Next”, and make sure the Driver CD is in your CD-ROM/DVD.

3. Select “Search for the best driver in these locations”, and check “Include this location in the search:” uncheck

10/100/1000 PCIe LAN Card RC401-EX User Manual

the other boxes.

4. Type in E:\ (If your CD-ROM/DVD is E:\) and click “Browse”.

5. Points specify a location, example E:\1000_GigaNet\ Marvell_Yukon\ Windows \WINXP, and click “OPEN” then

“OK”.

6. When the wizard indicates that it found a driver for the device click “Next”. Then click “Finish”.

2.4. Windows XP Server 64bit installation

1.Insert Host Card into an available PCIe slot (or ExpressCard slot).

2.Windows will display the Found New Hardware Wizard, “Ethernet controller”. Select “Install from a list or specific

location (Advanced)”, and click “Next”, and make sure the Driver CD is in your CD-ROM/DVD.

3. Select “Search for the best driver in these locations”, and check “Include this location in the search:” uncheck

the other boxes.

4. Type in E:\ (If your CD-ROM/DVD is E:\) and click “Browse”.

5. Points specify a location, example E:\1000_GigaNet\Marvell_Yukon\64bit_Windows, and click “OPEN” then “OK”.

6. When the wizard indicates that it found a driver for the device click “Next”. Then click “Finish”.

2.5. Windows VISTA 32/64bit installation

1.Insert Host Card into an available PCIe slot (or ExpressCard slot).

2. Windows will display the Found New Hardware Wizard.

3. Windows VISTA will find the most suitable driver for RC401-EX. There is NO NEED of driver disk.

2.6.Verifying The installation under Windows 2000, 2003, XP and VISTA

Follow the instructions in this section to verify that the controller was installed correctly.

1.Right click on 'My Computer' icon, select 'Properties', left click on 'Hardware' tab, and then on 'Device

Manager' button.

2.Double click on “Network adapters”, If there is no yellow “!” or “?” in front of “ Marvell Yukon 88E8053 PCI-e ASF

Gigabit Ethernet Controller “ the driver has started correctly.

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future support for your product.

Table des matières

Autres manuels Rosewill Carte réseau

Rosewill

Rosewill RC216 Manuel utilisateur

Rosewill

Rosewill N600PCE Manuel utilisateur

Rosewill

Rosewill PCIe LAN Card RC-401-Dual-EX Manuel utilisateur

Rosewill

Rosewill Network Card Manuel utilisateur

Rosewill

Rosewill RC-20001 Manuel utilisateur

Rosewill

Rosewill RC-402 Manuel utilisateur

Rosewill

Rosewill RNG-407-Dual Manuel utilisateur

Rosewill

Rosewill RC403 Manuel utilisateur

Rosewill

Rosewill RC604 Manuel utilisateur

Rosewill

Rosewill PCI 1394A Manuel utilisateur

Rosewill

Rosewill RC-NIC416Dual Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur