Roland SH-101 Manuel utilisateur

0101

Parameter Guide

SH-101

Model Expansion

2 3 4 5 6

7 8

This document explains about the parameters and setting screens for the ZENOLOGY Pro

Model Expansion.

The parameter names, the order in which they appear and other information may dier,

depending on the product.

1 SystemSystem

CONDITION

Simulates the changes that occur as a unit ages.

PITCH DRIFT

Adjusts the slight pitch drift that occurs when notes are

played on an analog synthesizer.

KEY MODE

[SOLO] button

Sound is produced monophonically.

[POLY] button

Sound is produced polyphonically.

[UNISON] button

Sound is produced in unison.

[SL-UNISON] button

Sound is produced in monophonic unison.

PORTAMENTO [OFF] [ON]

[AUTO] buttons (PORTA MODE)

Turns portamento on/o. If this is on,

the pitch will change smoothly from

one note to the next-played note.

OFF: Regardless of the portamento

time setting, portamento is not

applied.

ON: Portamento is always applied.

AUTO: Portamento is applied only

when you play legato (pressing the

next key before completely releasing

the previously-played key). This lets

you use your playing technique to

control portamento on/o.

[ORIG] button

Change according to the original curve

of the model.

[LIN] button

Change in a linear curve.

[EXP-1] button

Change in a non-linear curve (gentle

slope).

[EXP-2] button

Change in a non-linear curve (steep

slope).

[PRM EXP] button

(PARAM EXPANSION)

If this is ON, the range of the LFO

RATE, CUTOFF, RESONANCE, and

FILTER ENV DEPTH parameters are

extended beyond the range of the

original model.

2 MODULATORMODULATOR

[WAVEFORM] knob (LFO WAVEFORM)

Selects the waveform of the LFO.

TRI, SQR, S&H

RATE (LFO RATE)

Species the rate of the LFO cycle.

4 SOURCE MIXERSOURCE MIXER

(PWM wave) (PW LEVEL)

Adjusts the volume of the PWM wave.

(Sawtooth wave) (SAW LEVEL)

Adjusts the volume of the sawtooth wave.

SUB OSC (SUB OSC LEVEL)

Adjusts the volume of the sub oscillator.

[1OCT DOWN] [2OCT DOWN] [2OCT DOWN (small pulse width)] buttons (SUB OSC)

Species the SUB OSC type.

NOISE (NOISE LEVEL)

Adjusts the volume of the noise.

3 VCOVCO

MOD (OSC LFO MOD)

Adjusts the depth at which the LFO

modulates the OSC.

PULSE WIDTH (PULSE WIDTH MOD)

PW MODE = MAN: Adjusts the pulse width.

PW MODE = LFO/ENV: Adjusts the

modulation depth.

V(PW MODE)

Species the pulse width mode.

LFO: The pulse width is changed by

the LFO.

MAN: The pulse width is changed by PULSE

WIDTH MOD.

ENV: The pulse width is changed by

the ENV1.

[RANGE] knob (OSC RANGE)

Species the octave of the oscillator.

16’, 8’, 4’, 2’

4 SOURCE MIXERSOURCE MIXER

(PWM wave) (PW LEVEL)

Adjusts the volume of the PWM wave.

(Sawtooth wave) (SAW LEVEL)

Adjusts the volume of the sawtooth wave.

SUB OSC (SUB OSC LEVEL)

Adjusts the volume of the sub oscillator.

[1OCT DOWN] [2OCT DOWN] [2OCT DOWN (small pulse width)] buttons (SUB OSC)

Species the SUB OSC type.

NOISE (NOISE LEVEL)

Adjusts the volume of the noise.

5 VCFVCF

[R] [M] [S] buttons

(VINTAGE FLT TYPE)

If a vintage type model is selected,

these buttons change the type

of lter.

[R] models a Roland lter, and [M] and

[S] model vintage synthesizers made

by other companies.

ENV (FLT ENV DEPTH)

Adjusts the amount by which the cuto frequency is

controlled by the envelope.

MOD (FILTER MOD)

Adjusts the amount by which the LFO modulates the

cuto frequency.

KYBD (FLT KEY FOLLOW)

Varies the lter’s cuto frequency according to the note

played on the keyboard.

[CUTOFF] knob

Species the cuto frequency of the low-pass lter. The

frequency region above the cuto frequency is cut,

producing a more mellow tonal character.

[RES] knob (RESONANCE)

Boosts the region of the lter’s cuto frequency. Higher

values produce a stronger result, giving the sound a

distinctively synthesizer-like character.

6 VCAVCA

[LEVEL] knob (AMP LEVEL)

Adjusts the volume of the tone.

[ENV] [GATE] button

(AMP ENV SEL)

Species whether the volume is

controlled by the ENV (ENV) or

stays at a xed volume as long as

the key is held down (GATE).

7 ENVENV

[GATE+TRIG] [GATE] [LFO] buttons (ENV MODE)

Species what causes the envelope to attack.

Button Explanation

GATE+TRIG Attack each time a key is pressed.

GATE Attack when a key is pressed anew.

No attack when playing legato.

Button Explanation

LFO Attack repeatedly at each cycle of

the LFO as long as the key is held.

Envelope

You can edit the ADSR settings of the envelope.

[A] knob (ENV ATTACK)

Adjusts the Attack time.

[D] knob (ENV DECAY)

Adjusts the Decay time.

[S] knob (ENV SUSTAIN)

Adjusts the Sustain level.

[R] knob (ENV RELEASE)

Adjusts the Release time.

8 MFXMFX

MFX parameters

The edit screen is dierent for each MFX type.

[MFX] button

Turns MFX on/o.

[MFX TYPE] indication

Shows the currently selected

MFX name.

[MFX LEVEL] knob

Adjusts the MFX output level.

7 ENVENV

[GATE+TRIG] [GATE] [LFO] buttons (ENV MODE)

Species what causes the envelope to attack.

Button Explanation

GATE+TRIG Attack each time a key is pressed.

GATE Attack when a key is pressed anew.

No attack when playing legato.

Button Explanation

LFO Attack repeatedly at each cycle of

the LFO as long as the key is held.

Envelope

You can edit the ADSR settings of the envelope.

[A] knob (ENV ATTACK)

Adjusts the Attack time.

[D] knob (ENV DECAY)

Adjusts the Decay time.

[S] knob (ENV SUSTAIN)

Adjusts the Sustain level.

[R] knob (ENV RELEASE)

Adjusts the Release time.

Autres manuels pour SH-101

Table des matières

Autres manuels Roland Synthétiseur

Roland

Roland JX-305 Manuel de la liste des pièces

Roland

Roland JUNO-DS Manuel utilisateur

Roland

Roland Jupiter-50 Mode d’emploi

Roland

Roland Kiwi-8P Manuel utilisateur

Roland

Roland JX-305 Manuel utilisateur

Roland

Roland BK-5 Instructions d'installation et d'utilisation

Roland

Roland SH-201 Manuel d'utilisation et d'entretien

Roland

Roland JP-8000 Manuel d'utilisation et d'entretien

Roland

Roland GW-7 Manuel utilisateur

Roland

Roland System-8 Manuel utilisateur

Roland

Roland GR-30 Manuel utilisateur

Roland

Roland Lucina AX-09 Instructions de montage

Roland

Roland JUPITER 4 Manuel utilisateur

Roland

Roland JP-4 Manuel d'utilisation et d'entretien

Roland

Roland JUNO-106 Manuel utilisateur

Roland

Roland RODGERS Manuel utilisateur

Roland

Roland Sound Canvas SC-8850 Manuel utilisateur

Roland

Roland D-50 Manuel utilisateur

Roland

Roland EM-305 Manuel utilisateur

Roland

Roland JV-1080 Manuel utilisateur

Roland

Roland XP-10 Manuel utilisateur

Roland

Roland Groovesampler SP-808 Manuel d'utilisation et d'entretien

Roland

Roland Fa 06 Manuel utilisateur

Roland

Roland SH-201 Manuel utilisateur

Manuels Synthétiseur populaires d'autres marques

Kawai

Kawai MP7 Manuel technique

Joranalogue

Joranalogue Contour 1 Manuel utilisateur

Full Bucket Music

Full Bucket Music Mono/Fury Manuel utilisateur

Kawai

Kawai PH50 Manuel utilisateur

IK Multimedia

IK Multimedia UNO Synth PRO X Manuel utilisateur

Behringer

Behringer DEEPMIND 12 Manuel utilisateur

Gotharman

Gotharman Gotharman's anAmoNo-box Manuel utilisateur

Yamaha

Yamaha DX21 Manuel utilisateur

QuStream

QuStream HDFS-550 Manuel utilisateur

Modal Electronics

Modal Electronics ARGON8 Manuel utilisateur

Octave

Octave Cat SRM Manuel utilisateur

Dreadbox

Dreadbox Murmux Initiate Manuel utilisateur

neutral labs

neutral labs ELMYRA 2 Manuel utilisateur

Waldorf

Waldorf KYRA Manuel utilisateur

Tubbutec

Tubbutec Juno-66 Manuel utilisateur

EFM

EFM VCADSR - 3510 Manuel utilisateur

Yamaha

Yamaha MOTIF XF Manuel utilisateur

Korg

Korg Poly-800 Manuel utilisateur