Roland CG-8 Manuel utilisateur
11
1
2
2
2
1 2
1 2
1
1
2
2
Image flow within the CG-8
Switching Patches, Pictures, and Effects
Photo Patches
Switching Patches
Photo Patch
Switching Banks
Stamp Patches
Stamp Patch
AUTO SWITCH
Video output
“See the sound. Hear the visuals.”
The CG-8 is the world’s first instrument that lets you “perform images” in real time.
This leaflet will explain the basic concepts of the CG-8 in just five minutes.
These are pictures (JPEG images) with an effect
(movement) applied.
These are pictures (PNG logos) with an effect
(movement) applied.
Press the [PHOTO PATCH] pad,
then press one of the number pads
that are lit.
The Photo Patch background is combined
with the Stamp Patch foreground.
First, hold down the [PHOTO PATCH] pad and press
the desired bank (one of the number pads that are lit).
Then, press one of the number pads that are lit; the
bank and patch will change.
* If you want to switch Stamp Patches,
press [STAMP PATCH].* Press [STAMP PATCH] if you want to switch Stamp Patches.
Press [PICTURE] if you want to switch Pictures.
Press [EFFECT] if you want to switch Effects.
The patch in the video output will change,
and the display panel will indicate the patch
number you selected.
Switching Pictures
Press the [PICTURE] pad, then press
one of the number pads that are lit.
The picture in the video output will change,
and the display panel will indicate the
patch number you selected.
Switching Effects
Press the [EFFECT] pad, then press
one of the number pads that are lit.
The effect in the video output will change,
and the display panel will indicate the patch
number you selected.
Picture Effect
Picture Effect
If you want to use the pads to
switch patches, place “AUTO
SWITCH” at the “OFF” position.
SPEED
The patch will change
according to the setting of
the SPEED knob.
SOUND
The patch will change
according to the input sound.
Press either the [PHOTO PATCH] or the [STAMP
PATCH] pad to choose what you want to control.
You can switch the type of effect as described in
“Switching effects” on the preceding page.
COLOR
Choose the type of modulation.
Sine wave
Triangle wave
Square wave
Sawtooth wave
Irregular modulation
Change in response to an external audio input
Adjusts the speed of modulation.
Turn toward the right for
faster modulation.
Turn toward the left for
slower modulation.
Turning this knob all the
way to the left will turn off modulation.
MODULATION
RATE
SPEED
X, Y, Z
Adjusts the depth of a color-related
effect parameter.
12 o’clock is the center value.
Turn toward the right for positive change.
Turn toward the left for negative change.
Adjusts the depth of color-related modulation. Adjusts the depth of speed-related modulation.
Adjust the depth of X-axis, Y-axis, and Z-axis
related modulation.
COLOR
X-axis
Y-axis
Z-axis
Turn the [RATE] knob all the way toward the left to turn off
Modulation (see below).
Controlling visual effects
Adding movement (Modulation) to the effect
Turn off the [DEPTH] button.
The knobs will control the effect parameters directly.
Turn on the [DEPTH] button.
The knobs will control the amount of modulation in
the image. 12 o’clock is off.
Turn toward the right for positive change.
Turn toward the left for negative change.
12 o’clock is off.
Turn toward the right for positive change.
Turn toward the left for negative change.
12 o’clock is off.
Turn toward the right for positive change.
Turn toward the left for negative change.
RATE
SOUND 1 SOUND 2 SOUND 3
RATE
RATE
Modulation Depth
Modulation Depth
Modulation Depth
1
2
3
XY pad
D Beam
Internal mic
The CG-8 can detect peaks in the audio input from its internal mic or the rear
panel LINE IN jacks, and use these peaks to control the image.
Press the [INPUT SELECT] button to select the audio source you’ll use.
Move your finger left/right (the X-axis) or up/down (the Y-axis) on the
XY pad to apply an effect to the video output.
Move your hand above the D Beam sensor to apply an effect to the
video output.
Pauses the movement of the image
Applies the effect specified by the patch
Lights when the D Beam is in use
Lights when the XY pad is in use
Holds the effect even when you take your finger away from
the XY pad
Use the internal mic
Use the rear panel LINE IN jacks
Lights when a peak is detected
Lights in response to the input audio
Lights when the input level is excessive
Adjust the input level so that [PEAK] lights briefly
at the loudest sounds.
Turn the [INPUT LEVEL] knob to adjust the input level.
Turn the [PEAK FREQ] knob to specify the range at which the CG-8
will detect peaks.
Adjusts the depth of a speed-related
effect parameter.
12 o’clock is the center value.
Turn toward the right for positive change.
Turn toward the left for negative change.
Adjusts the fade.
Turn toward the right for
fade-to-white.
Turn toward the left for
fade-to-black.
The original images
processed by the effects are
output in real time.
Adjust the depth of X-axis, Y-axis,
and Z-axis related effect parameters.
12 o’clock is the center value.
Turn toward the right for positive change.
Turn toward the left for negative change.
SPEED FADE Image output
X, Y, Z
X-axis
Y-axis
Z-axis
Using external audio input Using the XY pad or D Beam
Toward LOW: Detect low-frequency peaks such as bass drum
Toward HIGH:Detect high-frequency peaks such as cymbals
As an exception, turning the knob all the way to
LOW will detect the power of the sound rather
than a specific frequency.
1
1
2
2
3
1 3 42
2
1
2
1
If you want to save a patch in a different bank
For details, refer to
“About projects” in
the owner’s manual.
The changes you make are temporary; they will revert to
their original state when you switch to another patch.
If you want to keep any changes you’ve made, you must
perform the Save operation.
Press the [SAVE] button and then press a number pad to
select a save destination.
How the CG-8’s data is organized
* If you want to save a Stamp Patch,
press [STAMP PATCH].
Press the [SAVE] button, then
press a number pad to specify a
save destination.
Press the [CHANGE PROJECT]
button.
03909167 ’05-5-1N
Press a number pad. Press the [CHANGE PROJECT]
button once again.
Switching projects
Saving a patch
Hold down the [PHOTO PATCH] pad,
and choose the bank (1–8).
The display panel will indicate “Load”
while the project is being loaded.
When loading is complete, the display
panel will indicate “-- --”.
Project
CompactFlash card
Internal hard disk
Photo Patches
(128 patches)
Stamp Patches
(128 patches)
Photo Pictures (48 pictures) Photo Effects (more than 200 effects)
Loading
image files
into your project Stamp Pictures (16 pictures)
• Parameter settings
• Modulation settings
• Controller settings
• Parameter settings
• Modulation settings
• Controller settings
Stamp Effects (more than 60 effects)
Selecting
pictures
Selecting
pictures
Selecting
effects
Selecting
effects
Selecting
effects
Selecting
effects
Autres manuels pour CG-8
3
Table des matières
Autres manuels Roland Synthétiseur
Roland
Roland VP-770 Manuel d'installation et d'exploitation
Roland
Roland Dr.Sample SP-202 Manuel utilisateur
Roland
Roland Fa 06 Manuel utilisateur
Roland
Roland SH-1000 Manuel utilisateur
Roland
Roland FANTOM 6 Manuel utilisateur
Roland
Roland JUNO-X Manuel utilisateur
Roland
Roland CG-8 Manuel utilisateur
Roland
Roland VIMA RK-300 Manuel utilisateur
Roland
Roland GR-55 Guide de configuration
Roland
Roland Atelier Combo AT-350C Manuel utilisateur
Roland
Roland XV-2020 Manuel utilisateur
Roland
Roland GR-300 Manuel utilisateur
Roland
Roland JX-8P Manuel utilisateur
Roland
Roland SH-101 Manuel utilisateur
Roland
Roland RS-50 Manuel technique
Roland
Roland Sond Canvas SC-88ST Pro Manuel utilisateur
Roland
Roland D-50 Manuel d'utilisation et d'entretien
Roland
Roland TB-303 Manuel d'utilisation et d'entretien
Roland
Roland juno-ds61 Manuel utilisateur
Roland
Roland Boutique JU-06 Guide d'installation
