Roland CD-2e Manuel utilisateur

Once you’ve finished recording, proceed to the

other side of this sheet to learn how to write a CD.

SD memory card

Set the two switches on the left side.

Connect the included power cord to the dedicated AC adaptor.

Power cord (included)

Set the [MIC SELECT] switch to the “INT”

position.

LouderQuieter

Peak indicator

Blink

Lit

Turn off

without the written permission of ROLAND CORPORATION.

The CD-2e makes it easy to capture your performances and write them to an audio CD. In Section 1,

we’ll show you how to use the CD-2e’s built-in microphone to record a performance to an SD memory

card. Then, in Section 2, we’ll show you how to write your recorded performance onto a CD.

Let’s Record to

an SD Memory Card

Firmly insert the

card all the way.

When the CD-2e recognizes

the card, the following screen

is displayed:

Set the [MIC LEVEL] switch to the “MANUAL”

position.

While producing the sound that you’ll

actually be recording, turn the [MIC] knob

to adjust the input level.

●For additional details on recording using the built-in

microphone, see page 36 of the CD-2e Owner’s Manual.

Adjust the level so that the peak indicator located above

the [MIC] knob lights briefly at the loudest moments of

the performance or vocal you’ll be recording.

The CD-2e starts recording.

Begin your performance.

The CD-2e stops recording.

The button’s light blinks red,

indicating that the CD-2e is

standing by for recording.

Press the [ (Record)] button.

Press the [ (Play)] button.

Press the [ (Stop)] button.

Press the [ ] [ ] buttons to select

the desired song.

Press the [ (Play)] [ (Stop)] buttons

to start and stop playback.

* To record additional performances, repeat Steps 4–7.

On the CD-2e’s rear panel, move

the [POWER] switch to the “ON” position.

To power outlet

Dedicated AC Adaptor (included)

Media to

Prepare

Insert the SD memory card into the card

slot on the left side panel.

(An SD memory card is included in the CD-2e box.)

* The shape of the power cord’s plug varies

depending on the country.

Media to

Prepare

04892545 07-09-1N

When you see this screen,

press the [ENTER] button.

When the FINALIZE screen appears,

press the [ENTER] button.

Press the [MENU] button to access the menu screen, and choose “Write (SD→CD)?”

*04892545-01*

* If you’re using the included SD memory card, the sample songs it

contains will also be written onto the CD.

* You can also select the songs to be written. For details on how to do

this, see page 79 in the CD-2e Owner’s Manual.

Press the [MENU] button to

access the menu screen.

f you’re sure you want to proceed,

press the [ENTER] button.

If you’re sure you want to proceed,

press the [ENTER] button.

Press the [ (Play)] [ (Stop)] buttons

to start and stop playback.

When the CD-2e recognizes the CD-R disc as an

audio CD, the following screen is displayed:

“CD” appears on the left side of the screen.

Insert the CD into the CD slot.

Insert the CD with its label surface facing upward.

As the screen instructs, insert the CD into

the CD slot located on the right side panel.

The CD-2e begins

writing a CD.

Please wait.

The disc will be ejected automatically when

CD writing is completed.

When you see this

screen, press the

[EXIT] button to end

the procedure.

Now you have a CD of your performance!!

●For detailed instructions on writing CDs, see page 79–81 of the CD-2e Owner’s Manual.

Let’s Create a CD Blank CD-R disc

Use the [ ] [ ] buttons to

choose “Write (SD →CD)?”

Press the [ENTER] button

to confirm your choice.

Autres manuels pour CD-2e

Autres manuels Roland Équipement d'enregistrement

Roland

Roland A-37 Manuel utilisateur

Roland

Roland UA-4FX2 Manuel utilisateur

Roland

Roland Boss GT-10 Manuel d'utilisation et d'entretien

Roland

Roland Super MPUII Manuel utilisateur

Roland

Roland CM-64 Manuel utilisateur

Roland

Roland V-160HD RCS Mode d’emploi

Roland

Roland Mobile UA Manuel utilisateur

Roland

Roland A-80 Manuel utilisateur

Roland

Roland BOSS SDE-3000EVH Manuel de l'opérateur

Roland

Roland MC-50 mkII Manuel utilisateur

Roland

Roland TR-808 Manuel d'utilisation et d'entretien

Roland

Roland V-studio VS-2480 Manuel d'utilisation et d'entretien

Roland

Roland Edirol R-05 Manuel utilisateur

Roland

Roland R-8 MK II Manuel utilisateur

Roland

Roland Edirol PCR-30 Manuel utilisateur

Roland

Roland RE-501 Manuel utilisateur

Roland

Roland SC-7 Manuel utilisateur

Roland

Roland AR-3000SD Manuel utilisateur

Roland

Roland MKS-30 Manuel utilisateur

Roland

Roland US-20 Manuel utilisateur

Roland

Roland super quartet mks-7 Manuel utilisateur

Roland

Roland TR-727 Manuel utilisateur

Roland

Roland System 100 104 Manuel utilisateur

Roland

Roland RSS-303 Manuel utilisateur

Manuels Équipement d'enregistrement populaires d'autres marques

KV2 Audio

KV2 Audio 500 Series Manuel utilisateur

Robotics Technologies

Robotics Technologies microBus-Cam II Manuel utilisateur

Seca

Seca 460 Manuel utilisateur

Cognex

Cognex MVS-8000 Series Manuel utilisateur

Mect

Mect MPNC006 Series Manuel utilisateur

Bad Caf

Bad Caf THE LEASH Manuel utilisateur

Strymon

Strymon NIGHTSKY Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric 16CH DIGITAL RECORDER DX-TL5000U Manuel utilisateur

Tews Technologies

Tews Technologies TPMC465 Manuel utilisateur

Honeywell

Honeywell Excel 50 Manuel utilisateur

SeaLevel

SeaLevel COMM+8.LPCI Manuel utilisateur

Arturia

Arturia AUDIOFUSE STUDIO Manuel utilisateur

Rukra

Rukra RK-1240 Manuel utilisateur

Samson

Samson SCOM Manuel utilisateur

Dynacord

Dynacord DPS260 Manuel utilisateur

Nice

Nice Core Manuel utilisateur

Pyle Pro

Pyle Pro PSS8 Manuel utilisateur

RF-System

RF-System TinyGate Manuel d'utilisation et d'entretien