Roland VersaArt RE-640 Manuel utilisateur

Setup Guide

Read this rst.

This describes the setup tasks and important conditions about

the installation location that must be met in order to enable use

of this machine.

Thank you very much for purchasing this product.

To ensure correct and safe usage with a full understanding of this product's performance, please be sure

to read through this manual completely and store it in a safe location.

Unauthorized copying or transferal of this manual, in whole or in part, is prohibited.

The contents of this document and the specications of this product are subject to change without no-

tice.

The documentation and the product have been prepared and tested as much as possible. If you nd any

misprint or error, please inform us.

Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur

through use of this product, regardless of any failure to perform on the part of this product.

Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may occur with

respect to any article made using this product.

This document is a setup guide for RE-640 ECO-SOL MAX ink model and RE-640 water-based pigment ink (FPG)

model.

Contents

Company names and product names are trademarks or registered trademarks of their respective holders.

http://www.rolanddg.com/

Contents........................................................................................................1

To Ensure Safe Use ......................................................................................2

Pour utiliser en toute sécurité.....................................................................9

Setup Guide........................................................................................................17

1. Installation Environment..........................................................................18

Deciding On an Installation Site ...............................................................................................18

Temperature and Humidity ........................................................................................................19

Installation Space ...........................................................................................................................19

2. Included Items.........................................................................................20

3. Assembling and Installing........................................................................22

Step 1: Assembling the Stand – Mounting the Machine .................................................22

Step 2: Installing the Media Holder..........................................................................................25

Step 3: Installing the Drain Bottle.............................................................................................27

Step 4: Removing the Retainer and Packaging Materials................................................28

4. Connect the Cables.................................................................................29

Connecting the Cables.................................................................................................................29

5. Water-based pigment ink (FPG) model: Installing the Ink Cartridges .....30

Water-based pigment ink (FPG) model: Installing the Ink Cartridges.........................30

6. ECO-SOL MAX ink model: Installing the Ink Cartridges .........................35

Filling with Ink for the First Time...............................................................................................35

Sticking of ECO-SOL MAX ink model label............................................................................35

ECO-SOL MAX ink model: Installing the Ink Cartridges....................................................36

7. Network Settings .....................................................................................44

Introduction .....................................................................................................................................44

Step 1: Make the Network Settings for the Computer......................................................44

Step 2: Make the Network Settings on the Printer.............................................................46

Step 3: Make the Port Settings for the Software RIP..........................................................48

8. When Not in Use for a Prolonged Period ................................................49

Keep Performing Maintenance .................................................................................................49

Alarm Feature ..................................................................................................................................49

9. When Transferring the Unit .....................................................................50

Procedures from Preparing for Transfer Through Reinstalling the machine.............50

To Ensure Safe Use

Improper handling or operation of this machine may result in injury or damage to property. Points

which must be observed to prevent such injury or damage are described as follows.

About WARNING and CAUTION Notices

WARNING Used for instructions intended to alert the user to the risk of death or severe

injury should the unit be used improperly.

CAUTION

Used for instructions intended to alert the user to the risk of injury or

material damage should the unit be used improperly.

Note: Material damage refers to damage or other adverse effects

caused with respect to the home and all its furnishings, as well to

domestic animals or pets.

About the Symbols

The symbol alerts the user to important instructions or warnings. The specic meaning

of the symbol is determined by the design contained within the triangle. The symbol at left

means "danger of electrocution."

The symbol alerts the user to items that must never be carried out (are forbidden). The

specic thing that must not be done is indicated by the design contained within the circle.

The symbol at left means the unit must never be disassembled.

The symbol alerts the user to things that must be carried out. The specic thing that

must be done is indicated by the design contained within the circle. The symbol at left

means the power-cord plug must be unplugged from the outlet.

To Ensure Safe Use

Incorrect operation may cause injury.

WARNING

Be sure to follow the operation proce-

dures described in this documentation.

Never allow anyone unfamiliar with the

usage or handling of the machine to

touch it.

Incorrect usage or handling may lead to an

accident.

Keep children away from the machine.

The machine includes areas and compo-

nents that pose a hazard to children and

may result in injury, blindness, choking, or

other serious accident.

Never operate the machine while tired

or after ingesting alcohol or any medi-

cation.

Operation requires unimpaired judgment.

Impaired judgment may result in an ac-

cident.

Never use the machine for any purpose

for which it is not intended, or use the

machine in an undue manner that ex-

ceeds its capacity.

Doing so may result in injury or re.

For accessories (optional and consum-

able items, power cord, and the like), use

only genuine articles compatible with

this machine.

Incompatible items may lead to an ac-

cident.

Before attempting cleaning, mainte-

nance, or attachment or detachment of

optional items, disconnect the power

cord.

Attempting such operations while the ma-

chine is connected to a power source may

result in injury or electrical shock.

CAUTION

Exercise caution to avoid being pinched

or becoming caught.

Inadvertent contact with certain areas may

cause the hand or ngers to be pinched or

become caught. Use care when performing

operations.

Never attempt operation while wearing a

necktie, necklace, or loose clothing. Bind

long hair securely.

Such items may become caught in the ma-

chine, resulting in injury.

Conduct operations in a clean, brightly

lit location.

Working in a location that is dark or cluttered

may lead to an accident, such as becoming

caught in the machine as the result of an

inadvertent stumble.

Never climb or lean on the machine.

The machine is not made to support a per-

son. Climbing or leaning on the machine

may dislodge components and cause a slip

or fall, resulting in injury.

Caution: cutting tool.

This machine has an internal tool. To avoid

injury, handle the tool with care.

WARNING

Never attempt to disassemble, repair, or

modify the machine.

Doing so may result in re, electrical shock,

or injury. Entrust repairs to a trained service

technician.

To Ensure Safe Use

Danger of electrical short, shock, electrocution, or re

WARNING

Connect to an electrical outlet that com-

plies with this machine's ratings (for

voltage, frequency, and current).

Incorrect voltage or insufcient current may

cause re or electrical shock.

Never use out of doors or in any loca-

tion where exposure to water or high

humidity may occur. Never touch with

wet hands.

Doing so may result in fire or electrical

shock.

Never allow any foreign object to get

inside. Never expose to liquid spills.

Inserting objects such as coins or matches

or allowing beverages to be spilled into the

ventilation ports may result in re or electrical

shock. If anything gets inside, immediately

disconnect the power cord and contact your

authorized Roland DG Corp. dealer.

Never place any ammable object nearby.

Never use a combustible aerosol spray

nearby. Never use in any location where

gases can accumulate.

Combustion or explosion may be a dan-

ger.

WARNING

Handle the power cord, plug, and electri-

cal outlet correctly and with care. Never

use any article that is damaged.

Using a damaged article may result in re

or electrical shock.

When using an extension cord or power

strip, use one that adequately satises

the machine's ratings (for voltage, fre-

quency, and current).

Use of multiple electrical loads on a single

electrical outlet or of a lengthy extension

cord may cause re.

Connect to ground.

This can prevent re or electrical shock due

to current leakage in the event of malfunc-

tion.

Position so that the power plug is within

immediate reach at all times.

This is to enable quick disconnection of the

power plug in the event of an emergency. In-

stall the machine next to an electrical outlet.

Also, provide enough empty space to allow

immediate access to the electrical outlet.

If sparking, smoke, burning odor, unusual

sound, or abnormal operation occurs, im-

mediately unplug the power cord. Never

use if any component is damaged.

Continuing to use the machine may result in

re, electrical shock, or injury. Contact your

authorized Roland DG Corp. dealer.

Do not use the supplied power supply

cord for other products.

Ratings

Side view of

the machine

To Ensure Safe Use

Important notes about the power cord, plug, and electrical outlet

Never place any object on top or subject to

damage.

Never bend or twist with undue force.

Never pull with undue force.

Never bundle, bind, or roll up.

Never allow to get wet.

Never make hot.

Dust may cause re.

To Ensure Safe Use

Ink, cleaning uid, and discharged uid are ammable and toxic.

In the event of ingestion or physical distress

In the event of contact with the eyes, immediately ush with water for at least 15 minutes. If eye irritation

continues, seek treatment by a physician.

In the event of contact with skin, immediately wash with soap. If irritation or inammation occurs, seek

treatment by a physician.

In the event of ingestion, do not induce vomiting, and immediately seek treatment by a physician. Forcibly

inducing vomiting may lead to danger of choking.

If odor leads to physical distress, move to a well-ventilated location and rest quietly. If dizziness or nausea

persists, seek treatment by a physician.

CAUTION

Ensure adequate ventilation for the work

area.

Failing to perform ventilation may result in a

health hazard or danger of combustion due

to ink fumes.

Never allow an ink cartridge to be sub-

jected to impact, and never attempt to

disassemble.

Ink may leak.

WARNING

Keep open ame away from the work

area.

Ink and discharged uid are ammable.

Never store ink, cleaning uid, or dis-

charged fluid in any of the following

locations.

 Any location exposed to open ame.

Any location where high temperature

may occur.

Near bleach or any other such oxidizing

agent or explosive material.

Any location within the reach of children

Fire may be a danger. Accidental ingestion

by children may pose a health hazard.

Never place an ink cartridge in re.

Ink may ow out, catch re, and spread re

to other nearby objects.

Never drink or sniff ink, cleaning uid, or

discharged uid, or allow them to come

in contact with the eyes or skin.

Doing so may be hazardous to the health.

To Ensure Safe Use

This machine weighs 200 kg (441 lb.). Media weighs 40 kg (88 lb.).

Danger of re, burns, or toxic gas emissions

WARNING

Install the machine in a location that is

level, stable, and able to bear the weight

of the machine.

The total weight may reach over 200 kg

(441lb.). Installation in an unsuitable loca-

tion may cause a major accident, including

tip over, fall, or collapse.

Unloading and emplacement are opera-

tions that must be performed by 6 per-

sons or more.

Tasks that require undue effort when per-

formed by a small number of persons may

result in physical injury. Also, if dropped,

such items may cause injury.

WARNING

Be sure to lock the stand's casters.

If the machine should begin to topple, a ma-

jor accident may result, including crushing

of the appendages or the body.

When storing roll media, implement

adequate safety measures to ensure

that the stored media will not roll, fall, or

topple over.

Danger exists of becoming pinned under the

media and suffering serious injury.

Handling roll media is an operation that

must be performed by two persons or

more, and care must be taken to prevent

falls.

Attempting to lift heavy media in a manner

that taxes your strength may cause physi-

cal injury.

WARNING

Caution: high temperatures

Areas such as the dryer become hot. Exer-

cise caution to avoid re or burns.

When printing is not being performed,

remove any loaded media or switch off

the power.

The continued application of heat at a

single location may cause the release of

toxic gases from the media or pose a re

hazard.

WARNING

Never use media that cannot withstand

heat.

Doing so may degrade the media, or may

result in re or the release of toxic gases.

To Ensure Safe Use

Ink Is Toxic

Ink and discharged uid are

toxic. Avoid contact with the

body. Use only in a well-venti-

lated area.

Caution: Moving Print Heads

The print heads inside the

cover move at high speed and

pose a hazard. Never insert the

hand or ngers into the gap.

Caution: Pinching Hazard

Be careful not to allow the n-

gers to become pinched when

closing covers.

Flammable

Ink and discharged uid are

ammable. Keep away from

open ame.

Caution: High Temperature

The platen and dryer become

hot. Exercise caution to avoid

re or burns.

Caution: High Voltage

Cover removal may pose hazard of

shock or electrocution due to high

voltage.

Warning labels are afxed to make areas of danger immediately clear. The meanings of these

labels are as follows. Be sure to heed their warnings. Also, never remove the labels or allow

them to become obscured.

Warning Labels

Flammable

Ink and discharged uid are

ammable. Keep away from

open ame.

Ink Is Toxic

Ink and discharged uid are

toxic. Avoid contact with the

body. Use only in a well-venti-

lated area.

Autres manuels pour VersaArt RE-640

Table des matières

Autres manuels Roland Traceur

Roland

Roland TrueVIS Series Caractéristiques techniques

Roland

Roland VersaEXPRESS RF-640 Manuel utilisateur

Roland

Roland TrueVIS VG-640 Manuel du propriétaire

Roland

Roland VS-640i Manuel d'utilisation et d'entretien

Roland

Roland LEF-300 Manuel utilisateur

Roland

Roland VersaEXPRESS RF-640 Manuel utilisateur

Roland

Roland DXY-1300 Manuel d'installation

Roland

Roland CAMM-1 PRO CM-500 Manuel d'utilisation et d'entretien

Roland

Roland VersaStudio BN-20 Manuel utilisateur

Roland

Roland DXY-800 Manuel utilisateur

Roland

Roland Camm-1 CX-24/12 Manuel utilisateur

Roland

Roland VS-640 Manuel d'utilisation et d'entretien

Roland

Roland Camm-1Pro Series Manuel utilisateur

Roland

Roland SOLJET PRO4 XF-640 Manuel utilisateur

Roland

Roland LEC-300 Manuel utilisateur

Roland

Roland VersaCamm VP-540 Manuel d'utilisation et d'entretien

Roland

Roland VersaUV LEF-200 Instructions de fonctionnement

Roland

Roland soljet pro4 xf 640 Manuel utilisateur

Roland

Roland PNS-401 Manuel utilisateur

Roland

Roland Color Camm Pro PC-60 Manuel d'utilisation et d'entretien

Roland

Roland Camm-1 CX-24/12 Manuel utilisateur

Roland

Roland LEC-300 Manuel utilisateur

Roland

Roland DPX-3300 Manuel utilisateur

Roland

Roland DXY_1350 Manuel utilisateur

Manuels Traceur populaires d'autres marques

MUTOH

MUTOH Kona 760 Manuel utilisateur

HP 7475a Manuel utilisateur

Vulcan-Hart

Vulcan-Hart FC-500VC Manuel utilisateur

Furuno

Furuno RP-180 Manuel utilisateur

MIMAKI

MIMAKI CF2 Series Manuel utilisateur

Ioline

Ioline Summit Manuel utilisateur

Summa

Summa S CLASS Manuel utilisateur

Gerber Technology

Gerber Technology GERBERplotter MP Series Manuel utilisateur

Furuno

Furuno RP-17 Manuel utilisateur

HP 7470A Manuel utilisateur

SII

SII LP-1010 Manuel utilisateur

Great Computer

Great Computer JII-61 Manuel utilisateur

Lectra

Lectra Alys 120 Manuel utilisateur

MUTOH

MUTOH Ultima SC-850D Manuel utilisateur

Skycut

Skycut D Series Manuel utilisateur

Commodore

Commodore 1520 Manuel utilisateur

Esko

Esko Kongsberg XE Manuel utilisateur

MUTOH

MUTOH Blizzard Manuel utilisateur