Roland TD-6SX Instructions de montage

Mesh Pads:

Although the TD-6SX features mesh V-pads for the snare (PD-105) and toms (PD-85 x 3), only the Snare input

of the TD-6V Percussion Module has dual trigger capabilities for mesh V-Pads.

In other words, rim triggering is not supported on MESH V-pads when connected to any of the tom inputs on

the TD-6V Percussion Module.

Note: When performing a factory reset on the TD-6V, the snare input pad type defaults to PD-80R which will

work for the PD-105. The tom inputs default to pad type PD-8. Changing the tom pad type to PD-80R may in-

crease sensitivity of the mesh head pad, but will not support independent rim triggering from mesh head tom

pads.

CY-12R/C-C V-Cymbal:

The TD-6V does not support 3-way triggering with the CY-12R/C-C. However there are two ways to use

the CY-12R/C with the TD-6V module:

1. This method uses Factory settings on the TD-6V:

•Connect one end of the cable labeled “RD” to the Bow/Edge jack of the CY-12R/C. This is the jack

closest to the player (opposite the top Roland logo) on the CY-12R/C-C.

Bow/Edge

Ride Input

•Connect the other end of the cable

labeled “RD” to the Ride Trigger input

on the rear of the TD-6V Percussion

Module.

Roland TD-6SX Tips

Mesh V-Pads and using the CY-12R/C-C V-Cymbal

Edge area

Bow area

•A ride sound will be produced when playing

the bow area at a normal level.

•By striking the bow area harder, a bell sound

will be produced.

•A different sound is produced by striking

the edge area.

2. This method uses ‘modified’ kits for the TD-6V.

•These kits are contained in the MIDI file TD6SX_CY12RC.mid which is included in this download pack-

age. You will need to transfer this file via MIDI into the TD-6V.

•If you prefer to program your own kits, refer to step #3 (on page 3).

•Connect one end of the cable labeled “RD” to the Bow/Bell jack of the CY-12R/C. This is the jack furthest

from the player (closer to the top Roland logo) on the CY-12R/C-C.

Bow/Bell Jack

•Connect the other end of the cable labeled

“RD” to the Ride Trigger input on the rear of

the TD-6V Percussion Module.

Ride Input

Bow area

Bell area

3. You can also program your own cymbal sound assignments for both Bow/Edge & Bow/Bell:

•Press KIT and use the [+] or [-] buttons to select the kit you want to edit.

•Press [EDIT] (KIT & EDIT buttons light).

•Press ENTER (The instrument (INST) selection screen appears).

•Strike the Bow area of the CY-12R/C, (display indicates trigger input H11, and the currently assigned

sound).

•Use the [+] or [-] buttons to select the desired ride cymbal sound.*

•Strike the Bell or Edge area of the CY-12R/C,(display indicates trigger input R11,and the currently

assigned sound).

•Use the [+] or [-] buttons to select the desired ride cymbal sound. *

*Key: Rd = Bow Ride Cymbal Sound Rde = Edge Ride Cymbal Sound

Rdb = Bell Ride Cymbal Sound Rdx = Bow/Bell ‘Cross-faded’ Cymbal Sound

Please refer to the TD-6V Owner’s Manual for more detailed editing instructions.

Roland Drum & Percussion Division

V-Drums.com

RolandUS.com

•Strike the bow area for a ‘bow’ ride sound.

•Strike the bell area for a ‘bell’ ride sound.

Autres manuels Roland Tambour

Roland

Roland PDX-8 Manuel utilisateur

Roland

Roland TR-8 Manuel technique

Roland

Roland PD-125/PD-105 Manuel utilisateur

Roland

Roland TR-606 Manuel d'installation

Roland

Roland TR-808 Manuel d'utilisation et d'entretien

Roland

Roland V-Drums TD-17KV Manuel utilisateur

Roland

Roland DR-880 Manuel utilisateur

Roland

Roland V-Drums MDS-9 Manuel utilisateur

Roland

Roland TD-20KX Manuel utilisateur

Roland

Roland TD-11 Manuel utilisateur

Roland

Roland VAD506 Mode d’emploi

Roland

Roland V-Drums TD-3 Manuel

Roland

Roland V-Drums TD-17KV2 Manuel utilisateur

Roland

Roland V-Tour Series Guide de configuration

Roland

Roland TR-8 Manuel utilisateur

Roland

Roland V-Drums KD-9 Manuel utilisateur

Roland

Roland TD-20K Manuel utilisateur

Roland

Roland Rhythm Coach RMP-5 Manuel utilisateur

Roland

Roland V-Drums TD-27 Manuel utilisateur

Roland

Roland V-Drums TD-20 Manuel utilisateur

Roland

Roland TD-12KV Manuel utilisateur

Roland

Roland V-Drums TD-4KX2 Manuel utilisateur

Roland

Roland V-HI-HAT VH-11 Manuel utilisateur

Roland

Roland V-Drums TD-4KX Manuel utilisateur

Manuels Tambour populaires d'autres marques

Yamaha

Yamaha RX-21 Manuel utilisateur

Sudoku

Sudoku LEXUS Manuel utilisateur

V-Drums

V-Drums V-Tour TD-9KX2 Manuel utilisateur

Yamaha

Yamaha DTXPLORER Manuel utilisateur

Cherub

Cherub WRW-206 Manuel utilisateur

Opti-Med

Opti-Med JM-D1 Series Manuel utilisateur

Yamaha

Yamaha DTS70 Manuel utilisateur

Yamaha

Yamaha DTXPRESS Manuel utilisateur

ATV

ATV aD5 Manuel utilisateur

Alesis

Alesis DM Pro Kit Manuel utilisateur

Koma Elektronik

Koma Elektronik RH 301 Manuel utilisateur

Casio

Casio RZ-1 Manuel utilisateur

Ashton

Ashton RHYTHMUVX Manuel utilisateur

Yamaha

Yamaha DD-7 Manuel utilisateur

Earthworks

Earthworks DrumKit DK7 Manuel utilisateur

Pintech

Pintech E-Gig Guide d'installation

Krüger & Matz

Krüger & Matz Warrior KM0764 Manuel utilisateur

Alesis

Alesis DM10 MKII Pro Manuel utilisateur