Roland UA-101 Manuel

1

Important announcement

You must read this!

Attention Windows XP SP1 users

Before using a USB 2.0 compatible audio interface, you must perform one of the two

actions listed below. If you're using Windows XP SP2, you may simply proceed.

• Update to Windows XP SP2 (recommended)

• Install the update module into Windows XP SP1

Caution!

If you do not install this, an excessive load will be placed on the CPU while

recording and playing audio, and the system will not operate correctly.

A. Checking your Windows XP version (SP1 or SP2)

1Click the start menu, and right-click My Computer.

2Click Properties, and the System Properties dialog box will appear.

3Check the indication in the System area.

If this shows Service Pack 2, Windows XP SP2 is installed. You may simply

proceed.

If this shows Service Pack 1, Windows XP SP1 is installed. You will have to

update.

Next, proceed to B. Updating Windows XP SP1 (p. 2).

2

Important announcement

B. Updating Windows XP SP1

You may use either of the following methods to update.

B-1. Update to Windows XP SP2 (recommended)

B-2. Install the update module into Windows XP SP1

■B-1. Updating to Windows XP SP2 (recommended)

Choose the start ➔All Programs ➔Windows Update, and update to Windows XP

SP2 as directed by the on-screen instructions.

■B-2. Install the update module in Windows XP SP1

* This information is current as of April 2005. Please be aware that the address (URL) and the

displayed content may change without notice.

1Access the Microsoft search page.

http://www.microsoft.com/downloads/

2In “Search for a download” located in the upper left, type “KB822603”.

3The search engine will find Update for Windows XP (KB822603).

Click the link to go to the Update for Windows XP (KB822603) page.

Perform the installation as directed by the on-screen instructions.

■B-3. Verifying that the update has been performed

4Change the Folder Options setting.

1. Open Control Panel, and double-click Folder Options.

* If the above icon cannot be found, click Appearance and Themes, and then click

Folder Options.

2. Click the View tab.

3. In Advanced settings, uncheck “Hide extensions for known file types,”

click “Show hidden files and folders,” and click [OK].

3

Important announcement

5Check that the driver was updated.

1. Start up Windows Explorer, navigate to the folder Windows ➔ System32 ➔

drivers, and look for usbehci.sys. Right-click usbehci.sys, and choose

Properties from the menu that appears.

* Windows Explorer is located in the Windows start menu ➔ All Programs ➔

Accessories.

2. Click the Version tab, and check the File version.

The information displayed for the version should look something like this:

5.1.2600.1243. If the underlined portion is 1243 or higher, the update is

complete. Exit Explorer, and proceed to the next step.

If the underlined portion is lower than 1243, you will need to update.

Please perform the update.

4

Important announcement

* Up-to-date support information is provided at the following URL.

Please refer to it as well.

http://www.edirol.net/

Copyright © 2005 Microsoft Corporation All rights reserved.

Copyright © 2005 ROLAND CORPORATION All rights reserved.

No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION.

40671001 1PD

Table des matières

Autres manuels Roland Accessoires

Roland

Roland GK-3B Manuel utilisateur

Roland

Roland TM-6 PRO Manuel utilisateur

Roland

Roland VS4S-1 Manuel utilisateur

Roland

Roland Studio-Capture Amplifier Manuel utilisateur

Roland

Roland MC-808 Manuel utilisateur

Roland

Roland DIF-800 Manuel utilisateur

Roland

Roland UM-1EX Instructions de montage

Roland

Roland GFC-50 Manuel utilisateur

Roland

Roland KP-24 Manuel utilisateur

Roland

Roland Edirol UA-25 Manuel utilisateur

Roland

Roland MCB-3 Manuel utilisateur

Roland

Roland Octa-Capture Manuel

Roland

Roland UA-1A Manuel utilisateur

Roland

Roland VK-8M Manuel utilisateur

Roland

Roland FC-100 mkII Manuel utilisateur

Roland

Roland UA-101 Instructions de montage

Roland

Roland UA-30 Manuel utilisateur

Roland

Roland Cakewalk VS-700R Manuel utilisateur

Roland

Roland TRI-Capture Manuel utilisateur

Roland

Roland Duo-Capture UA-11 Manuel utilisateur

Roland

Roland GK-2A-Kit Manuel utilisateur

Roland

Roland AE-7000 Manuel utilisateur

Roland

Roland ZSC-1 Manuel utilisateur

Roland

Roland FC-7 Manuel utilisateur

Manuels Accessoires populaires d'autres marques

Hillco

Hillco 2810 Manuel utilisateur

Siemens

Siemens QSA2700D Manuel de l'opérateur

Contours

Contours ZY024 Manuel utilisateur

Saivod

Saivod VS621 Manuel utilisateur

Virtuox

Virtuox VirtuCLEAN 2.0 Manuel utilisateur

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuel utilisateur

Z-Wave

Z-Wave HSD-200Z Manuel utilisateur

turck

turck FMX-IM-2UPLI63FX Manuel utilisateur

Decagon Devices

Decagon Devices 10HS Manuel utilisateur

UPPAbaby

UPPAbaby Cup Holder Manuel utilisateur

Elko

Elko SmartSensor Leakage Wireless Manuel utilisateur

Grizzly

Grizzly H8371 Manuel utilisateur

Panasonic

Panasonic HG-T Series Manuel utilisateur

IFM Electronic

IFM Electronic Efector 250 Series Guide de référence

DigiDesign

DigiDesign 888/24 I/O Manuel utilisateur

PROZIS

PROZIS QUAY Manuel utilisateur

patagonia

patagonia PSI Vest Manuel utilisateur

SFC Energy

SFC Energy EFOY GO! Manuel utilisateur