Roda DP860-UX Manuel utilisateur
roda computer GmbH • Landstraße 6 • 77839 Lichtenau/Baden
Tel.:+49(0)72279579-0 • Fax:+49(0)72279579-20 • www.roda-computer.com
User’s Guide
15“ TFT display
Type: DP860-UX
Art. No.: 141023
- 2 -
All rights reserved. No part of this publication may be reproduced,
transmitted, transcribed, stored in a system, or translated into any
language, or computer language, in any form, or by any means,
electronic, mechanical, magnetic, optical, chemical, or other, without
the prior written permission of roda Computer GmbH.
roda computer GmbH reserves the right to revise this publication
and to make changes from time to time in the contents hereof
without obligation to notify any person of such revision or changes.
roda computer GmbH grants no warranties, either expressed or
implied, with respect to the contents hereof and specially disclaims
any warranties as to merchantability or fitness for any particular
application.
roda computer GmbH, Landstraße 6, 77839 Lichtenau
Author: Ramona Roth
Creation Date: 25/05/2007
Date of revision: 02/07/2007
TKZ: 146296
- 3 -
EMC and Safety Notice
Federal Comm. Commission
Radio Frequency Interference Statement
This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the
instructions, may cause interference to radio communications. This
equipment has been tested and found to comply with Class B digital
devices, pursuant to Part 15 of the FCC rules which are designed to
provide reasonable protection against such interference when
operated in a commercial or residential environment.
Countermeasures if interference occurs
You are encouraged to do the following if interference occurs while
you are operating the device:
1. Turn OFF the unit and unplug the AC adapter from the
outlet to see if the interference disappears.
2. Connect the AC adapter to the outlet in another room and
check if the interference still exists.
3. Use an outlet that is far away from the interfered appliance.
4. Re-orient your computer in respect to the interfered
appliance to see if there is improvement.
If all of these failed, please call your dealer for help.
CE
This equipment complies with the requirements set out in the
Council Direction on the Approximation of the laws of the Member
States relating to Electromagnetic Compatibility (89/336/EEC).
Power Conservation
It is recommended that you enable the power saving functions even
not running with battery.
- 4 -
Recycling
All materials used in the construction of this unit are recyclable or
environmentally friendly. No CFC or related materials were used in
the manufacturing process or inside the product.
Please recycle the packing materials, and at the end of the unit’s
life, all other materials in accordance with the local regulations.
- 5 -
Content
1PREAMBLE.............................................................................6
2VARIOUS PHOTOGRAPHS.................................................7
2.1.1 SCOPE OF DELIVERY .............................................................8
2.1.2 I/O PORTS .............................................................................8
2.1.3 OPERATOR KEYBOARD (12 KEYS)........................................8
2.1.4 OSD MENU ...........................................................................9
2.1.5 VOLUME KEYS.......................................................................9
2.1.6 MECHANICAL DIMENSIONS..................................................10
3DESCRIPTION OF OSD MENU.........................................11
3.1.1 SETUP .................................................................................11
3.1.2 OPTION:PIP (PICTURE IN PICTURE)..................................12
3.1.3 INFORMATION (INPUT IMPOSSIBLE).....................................12
3.1.4 SATURATION........................................................................13
3.1.5 OSD POSITION ...................................................................13
3.1.6 FIRMWARE (INPUT IMPOSSIBLE).........................................13
3.1.7 OPTION:SYSTEM (ONLY WITH PIP/VIDEO).........................14
3.1.8 GAMMA ................................................................................14
3.1.9 SIZE .....................................................................................14
3.1.10 ADC (ONLY FOR RGB ANALOGUE)....................................15
3.1.11 SAVE MODE.........................................................................15
3.1.12 SHARPNESS ........................................................................15
3.1.13 CONTRAST...........................................................................16
3.1.14 BRIGHTNESS .......................................................................16
4OPTION: DIRECT KEY MODE...........................................16
5TECHNICAL DATA..............................................................17
6 CLEANING AND MAINTENANCE.....................................19
7. TROUBLESHOOTING.................................................................19
8 REPAIR SERVICE.........................................................................19
- 6 -
1 Preamble
The roda DP860-UX is a multi-function-display developed for rough
environmental conditions with a screen diagonal of 31.8 cm (15’’).
This screen is able to perform a maximum of physical resolution of
1,280x1,024. 16.7 million colours can be represented.
Caused by its robust metal cabinet it can be used in military vehicles.
It has a resistive USB tochsystem, a USB touchcontroller with 8
function keys (F1-F8) and an integrated 2-port USB 2.0 Hub for
direct connection of two USB periphery devices like keyboard or
mouse.
There is also an integrated stereo amplifier with two speakers which
can be connected to the soundcard.
The roda DP860-UX has signal input devices for DVI and RGB
analogue. The signal sources can be chosen by the On Screen
Display (OSD). Representation can be in 1:1 (scaled) or it can be in
the usual resolutions like 640x480, 800x600, 1024x768. In the case
of 1024x768 electronic will address the passive picture elements in
blue.
OPTION: Picture in Picture (PIP) Functionality
The internalal electronic of DP860-UX is able to work up and show
two signal sources at the same time. The electronic distinguishes
between a primary screen (PS) and a secondary screen (SS). The
secondary screen is usually connected by video signal source and
partially cross-fades the primary screen which shows the DVI or
RGB analogue signal source.
The secondary screen can not be scaled and is able to work out
input timings with max. 755 horizontal pixels. Optionally roda can
deliver it with two changeable video inputs and can be connected
with CCIR or NTSC signal sources. One video input is a CVBS
(FBAS) input, the second one can be realised as CVBS (FBAS) or
as Y/C (SVHS). The recognition of the colour happens
automatically.
INFORMATION: The second screen can show a standard VGA
picture or boot picture, if a video picture is shown on the first screen.
- 7 -
2 Various photographs
View: keyboard with joystick
View: frontside of display
- 8 -
2.1.1 Scope of delivery
1 ea. DP860-UX
1 ea. Installation CD for touchscreen
1 ea. User’s guide
2.1.2 I/O Ports
Signal inputs rear side (from the left to the right):
supply voltage input 3-pol VG96912A8-98 PN
connector
USB upstream/sound
(optional)
9-pol-Sub-D socket
DVI / USB-upstream DVI-AD socket
RGB analogue 15-Pol Sub-D-HD socket
USB1-downstream USB-A socket
USB2-downstream USB-A socket
2.1.3 Operator Keyboard (12 keys)
The keyboard can be found on the front side of the display below the
screen. The function of the keys is assured by a USB upstream
connection with the host computer (from the left to the right):
Number of
key
key remark
1 F1 PC function key (USB)
2 F2 PC function key (USB)
3 F3 PC function key (USB)
4 F4 PC function key (USB)
5 F5 PC function key (USB)
6 F6 PC function key (USB)
7 F7 PC function key (USB)
- 9 -
8 F8 PC function key (USB)
9 backlight off Display internal
10 reduce
brightness
display internal
11 enhance
brightness
display internal
12 display/computer
on/off
display internal
2.1.4 OSD Menu
The OSD operator keyboard is located on the top border of the
electronic box (from the left to the right). Controlling happens with
four quadratic keys:
key symbol of key function
1 hand symbol ENTER / Select
2 arrow left menu Navigation leftside/
reduce value
3 arrow right menu Navigation right /
enhance value
4 rectangle ESC/Exit
2.1.5 Volume Keys
The keys for the adjustment of volume are on the right border of the
electronic box. Arrangement on the right side from top to bottom.
key symbol of key function
1 speaker ↑enhance volume
2 speaker ↓reduce volume
- 10 -
2.1.6 Mechanical Dimensions
Table des matières
Autres manuels Roda Moniteur
