Roborock S6 Pure Manuel utilisateur

Roborock Vacuum

Cleaner S6 Pure

https://drive.google.com/open?id=1zuui9MLG63FB5Qb8tWaNvyjKS_GZg7h

Part1 App Connection

Part2 App Features

Instruction

Before the first cleaning task, please go to Settings page and turn on

the map saving mode. During cleaning, please ensure that the

cleaner starts from the dock charger. The cleaner will automatically

return to dock charger after all the rooms have been cleaned.

The charging dock needs to be placed against the wall. Obstacles are not

allowed within 0.5m to the left and right of the cleaner, and within 1m in front of

the charging dock.

1.Room cleaning

The cleaner will automatically

divide areas based on rooms. When

you don't want to clean all rooms

but just one or multiple rooms, go

to the map interface, as shown

below, and tap to select the

room(s) you want to clean.

At the same time, you can

customize the clean mode

2. Zone cleaning

Only a simple one-step operation on

the app is required to make the

cleaner automatically clean the target

area.

Method: Go to the map interface and

tap the Zone button. The initial areas

will automatically pop up on the map.

You can manually move or scale up or

scale down the target cleaning area.

At the same time, you can customize

the ①numbers of cleaning, ②cleaning

mode

The complexity of the home

environment may cause some

errors in the automatic area

division by the machine. The

manual area division function

allows us to correct the errors

according to the actual home

environment.

Method: Enter the map interface

for the cleaner and tap ①“Edit

map”, then go to “②Edit room".

If you want to merge two areas, tap

“Merge". If you want to divide an

area, tap “Divide", and then

proceed by following the

instructions.

3. Edit room

Method：Enter the map interface, go to“Mode settings”to choose the cleaning mode.

4. Custom cleaning mode

Method: Enter the map interface for the cleaner and tap Edit map”-“No-go zone”,Then

tap the Invisible wall”\“No-go zone”,buttons to scale up/scale down/move invisible walls

and no-go zones. Tap “①”save and the cleaner will not enter these zones.

注意:

1. You can add up to 10 invisible walls and no-go

zones respectively when the cleaner is online.

The cleaner will pause cleaning when you add an

invisible wall or no-go zone.

2. You can edit or delete a no-go zone or

invisible wall only when the cleaner is charging,

but not in any other states.

3. The min. area for a no-go zone is 0.2m² and

the max. area is 10m*10m while the min. length

for an invisible wall is 0.4m and the max. length

is 10m.

4. A no-go zone or invisible wall should be at

least 50 cm away from the dock.

5. Invisible wall and no-go zone

6.Carpet mode

When this mode is enabled, the

cleaner will automatically identify a

carpet during cleaning and apply

the maximum suction power to

clean it, and resume its normal

suction power when stepping off

the carpet.

Method: enter ①Setting-②Vacuum

settings, Enable ③"Carpet mode"

button.

7.DND mode

Note:

1.After the DND mode is enabled, if the cleaner

automatically return to charging dock due to low

battery capacity, the machine will not continue

cleaning after the battery capacity is sufficient.

2. All passive voice prompts (such as low battery)

will be unavailable and the brightness of the power

light will reduce.

3.The DND mode will be disabled once there is any

active operation (such as removing the dust bin).

This mode is enabled in the factory and effective

between 22:00-08:00 by default.

After scheduled cleaning is set up, the

machine will perform this action before it is

connected to Wi-Fi（TW、RUS

regardless of whether it is connected to

Wi-Fi ）.

Autres manuels pour S6 Pure

Table des matières

Autres manuels Roborock Aspirateur

Roborock

Roborock QX0PEA Manuel utilisateur

Roborock

Roborock Dyad Pro Manuel utilisateur

Roborock

Roborock Dyad Pro Manuel utilisateur

Roborock

Roborock H7 Guide d'installation

Roborock

Roborock S6 MaxV Manuel utilisateur

Roborock

Roborock Auto-Empty Dock AED01HRR Manuel utilisateur

Roborock

Roborock Q5 Pro Manuel utilisateur

Roborock

Roborock H7M1A Power Manuel utilisateur

Roborock

Roborock G10 Manuel utilisateur

Roborock

Roborock Q7 Max Manuel utilisateur

Roborock

Roborock Auto-Empty Dock Pure Manuel utilisateur

Roborock

Roborock S8 Pro Ultra Manuel utilisateur

Roborock

Roborock Dyad Pro Manuel utilisateur

Roborock

Roborock E5 Manuel utilisateur

Roborock

Roborock Q7 Max+ Manuel utilisateur

Roborock

Roborock S7 Manuel utilisateur

Roborock

Roborock S8 Manuel utilisateur

Roborock

Roborock S7 Manuel utilisateur

Roborock

Roborock Q8 Max Manuel utilisateur

Roborock

Roborock Roborock S4 Manuel utilisateur

Roborock

Roborock Q5 Manuel utilisateur

Roborock

Roborock E4 Manuel utilisateur

Roborock

Roborock S7 Manuel utilisateur

Roborock

Roborock Roborock S5 Series Manuel utilisateur

Manuels Aspirateur populaires d'autres marques

Bissell

Bissell LittleGreen Proheat 1425 Series Manuel utilisateur

Panasonic

Panasonic MC-YL637S147-AE Manuel utilisateur

NEFF

NEFF N17XH10 0 Series Manuel utilisateur

LG A9 Series Manuel utilisateur

Oreck

Oreck Cordless Captura BK51700 Series Manuel utilisateur

Kogan

Kogan KAVACROBVWA Manuel utilisateur

Kränzle

Kränzle VENTOS 50 ID Guide de l'utilisateur

EVVO

EVVO Ai35 Manuel utilisateur

DeWalt

DeWalt DWH200D Manuel utilisateur

Pontec

Pontec Pondomatic Vacuum Cleaner Manuel utilisateur

Cleanmaxx

Cleanmaxx PC-P007E Manuel utilisateur

Exido

Exido 240-114 Manuel utilisateur

RIDGID

RIDGID WD1685AU0 Manuel utilisateur

Ezviz

Ezviz RE4P Manuel utilisateur

STG global

STG global TANVAC HDV3000 Manuel utilisateur

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Manuel utilisateur

Factory

Factory M3340 Manuel utilisateur

Shop-Vac

Shop-Vac VN92 SERIES Manuel utilisateur