Robe Robin Actor 3 Smart White Manuel utilisateur

Version 1.0

Table of contents

1. Safety instructions ......................................................................................................... 3

2. Fixture exterior view ...................................................................................................... 5

3. Installation....................................................................................................................... 6

3.1 Connection to the mains ............................................................................................ 6

3.2 Installing the top hat ................................................................................................... 7

3.3 Rigging the xture ...................................................................................................... 8

3.4 DMX-512 connection................................................................................................ 10

4. Control menu map........................................................................................................ 11

5. Robin Actor 3 Smart White - DMX chart.....................................................................13

5.1LED zone order ......................................................................................................... 15

6. Control menu ............................................................................................................... 16

6.1 Addressing (DMXA) ................................................................................................. 16

6.2 Zoom (Zoom) ........................................................................................................... 16

6.3 Virtual colour wheel (Vir C) ...................................................................................... 16

6.4 Dimmer (Dimm)........................................................................................................ 16

STANDARD MENU (MENU).......................................................................................... 16

6.5 Fixture information (Info) .......................................................................................... 16

6.6 Personality (Pers)..................................................................................................... 17

6.7 Manual Control (Manual).......................................................................................... 17

6.8 Test program (Test Prg)........................................................................................... 17

6.9 Stand-alone (St Alone)............................................................................................. 18

6.10 Reset...................................................................................................................... 18

6.11 Special functions (Special)..................................................................................... 18

7. RDM ............................................................................................................................... 19

8. Wireless DMX operation .............................................................................................. 20

9. Error and information messages ................................................................................ 20

10. Technical Specications............................................................................................ 21

11. Maintenance and cleaning......................................................................................... 23

11.1 Replacing fuse ....................................................................................................... 23

12. Photometric diagrams................................................................................................ 24

Robin Actor 3 Smart White

FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY

BEFORE POWERING OR INSTALLING YOUR ROBIN Actor 3 !

Save it for future reference.

This device has left our premises in absolutely perfect condition. In order to maintain this condition and to

ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning

notes written in this manual.

The manufacturer will not accept liability for any resulting damages caused by the non-observance of this

manual or any unauthorized modication to the device.

Please consider that damages caused by manual modications to the device are not subject to warranty.

The Robin Actor 3 was designed for indoor use and it is intended for

professional application only. It is not for household use.

1. Safety instructions

DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS

UNIT!

Make sure that the available voltage is not higher than stated on the xture.

This xture should be operated only from the type of power source indicated on the marking label. If you are

not sure of the type of power supplied, consult your authorized distributor or local power company.

Always disconnect the xture from AC power before cleaning, removing or installing the fuses, or any part.

The power plug has to be accessible after installing the xture. Do not overload wall outlets and extension cords

as this canresult in re or electric shock.

Do not allow anything to rest on the power cord. Do not locate this xture where the cord may be damaged by

persons walking on it.

Make sure that the power cord is never crimped or damaged by sharp edges. Check the xture and the power

cord from time to time.

Refer servicing to qualied service personnel.

This xture falls under protection class I. Therefore this xture has to be connected to

a mains socket outlet with a protective earthing connection.

Do not connect this xture to a dimmer pack.

LED light emission. Risk of eye injury. Do not look into the beam at a distance of less

than 2 meters from the front surface of the product. Do not view the light output with

optical instruments or any device that may conncentrate the beam

If the xture has been exposed to drastic temperature uctuation (e.g. after transportation), do not switch it on

immediately. The arising condensation water might damage your device. Leave the device switched off until

it has reached room temperature.

Do not shake the xture. Avoid brute force when installing or operating the xture.

This xture was designed for indoor use only, do not expose this unit to rain or use near water.

When choosing the installation spot, please make sure that the xture is not exposed to extreme heat, moisture

or dust.

Air vents and slots in the xture´s head and base are provided for ventilation, to ensure reliable operation of

the device and to protect it from overheating.

Do not block the LEDs array with any object when the xture is under operation.

The openings should never be covered with cloth or other materials, and never must be blocked.

This xture should not be placed in a built-in installation unless proper ventilation is provided.

Only operate the xture after having checked that the housing is rmly closed and all screws are tightly faste-

ned.

Always use a secondary safety cable when mounting this xture.

Make sure that the area below the installation place is blocked when rigging, derigging or servicing the xtu-

re.

Do not block the front objective LEDs with any object when the xture is under operation.

The xture becomes very hot during operation. Allow the xture to cool approximately 20 minutes prior to

manipulate with it.

Operate the xture only after having familiarized with its functions. Do not permit operation by persons not

qualied for operating the xture. Most damages are the result of unprofessional operation!

Please use the original packaging if the xture is to be transported.

Please consider that unauthorized modications on the xture are forbidden due to safety reasons!

If this device will be operated in any way different to the one described in this manual, the product may suffer

damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-

circuit, burns, electric shock, crash etc.

2. Fixture exterior view

5 - Apertures for safety chain

6 - DMX out

7- DMX in

8 - PowerCon socket

9 - Fuse holder

10 - Apertures for quick-turn

fasteners

1 - Moving head

2 - Tilt lock

3 - Control buttons

4 - Display

3. Installation

Fixtures must be installed by a Qualied electrician in accordance with all

national and local electrical and construction codes and regulation.

3.1 Connection to the mains

For protection from electric shock, the xture must be earthed!

The Robin Actor 3 is equipped with auto-switching power supply that automatically adjusts to any 50-60Hz AC

power source from 100-240 Volts.

If you need to install a suitable plug on the power cord, note that the cores in the power cord are coloured ac-

cording to the following table. The earth has to be connected!

If you have any doubts about proper installation, consult a qualied electrician.

Core (EU) Core (US) Connection Plug Terminal Marking

Brown Black Live L

Light blue White Neutral N

Yellow/Green Green Earth

This device falls under class one and must be earthed (grounded)!

3.2 Installing the top hat

Switch off the xture before top hat installation

1.Unscrew the four fastening screws (3) which securing flange (4) to the head (5) and install new flange. Keep

its right position- the cutouts (A) in the flange must look towards the arms.

Original flange New flange

2.Place the top hat (1) on the head (5), press locks (2) and turn the top hat counter-clockwise until it snap into

slots (B) in the flange.

3.3 Rigging the xture

The overhead installation must always be secured with a secondary safety attachment, e.g. an appropriate

safety rope. This secondary safety attachment must be constructed in a way that no part of the installation can

fall down if the main attachment fails.

When rigging, derigging or servicing the xture staying in the area below the installation place, on bridges,

under high working places and other endangered areas is forbidden.

The operator has to make sure that safety-relating and machine-technical installations are approved by an expert

before taking into operation for the rst time and after changes before taking into operation another time.

The operator has to make sure that safety-relating and machine-technical installations are approved by an

expert after every four year in the course of an acceptance test.

The operator has to make sure that safety-relating and machine-technical installations are approved by a skilled

person once a year.

The xture should be installed outside areas where persons may walk by or be seated.

IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including (but not limited to)

calculating working load limits, installation material being used, and periodic safety inspection of all installation

material and the projector. If you lack these qualications, do not attempt the installation yourself, but instead

use a professional structural rigger. Improper installation can result in bodily injury or damage to property.

The xture has to be installed out of the reach of people.

If the xture shall be lowered from the ceiling or high joists, professional trussing systems have to be used. The

xture must never be xed swinging freely in the room.

Caution: Fixture may cause severe injuries when crashing down! If you have doubts concerning the safety of

a possible installation, do not install the moving head!

Before rigging make sure that the installation area can hold a minimum point load of 10 times the xture’s

weight.

When installing the device, make sure there is no highly inammable

material (decoration articles, etc.) in a distance of min. 0.4 m.

CAUTION!

Use an appropriate clamp to rig the xture on the truss.

Follow the instructions mentioned at the bottom of the base.

Make sure that the device is xed properly! Ensure that the

structure (truss) to which you are attaching the xtures is secure.

The xture can be placed directly on the stage oor by means of the removable stand (4) or rigged on a truss

by means of the omega holder (1) and clamp (2) without altering its operation characteristics. Both removable

stand and omega holder can be fastened with two 1/4-turn locks to the bottom of the xture. Adjust xture´s

head to desired position and tighten tilt lock (5) to secure the head position.

For securing the xture to the truss install a safety wire that can hold at least 10 times the weight of the xture.

Use only a safety wire with screw-on snap-hook. Thread the snap-hook through two apertures in the xture

base and the wire around the truss as shown on the picture below.

1-Safety wire

2-Apertures for safety wire

3-Trust

When installing xtures side-by-side, avoid illuminating one xture with

another!

3.4 DMX-512 connection

The xture is equipped with 5-pin XLR sockets for DMX input and output. Only use a shielded twisted-pair

cable designed for RS-485 and 5-pin XLR-plugs and connectors in order to connect the controller with the

xture or one xture with another.

DMX - output DMX-input

XLR mounting-sockets (rear view): XLR mounting-plugs (rear view):

If you are using the standard DMX controllers, you can connect the DMX output of the controller directly with

the DMX input of the rst xture in the DMX-chain. If you wish to connect DMX controllers with other XLR-out-

puts, you need to use adapter cables.

Building a serial DMX chain:

Connect the DMX-output of the rst xture in the DMX-chain with the DMX-input of the next xture. Always

connect one output with the input of the next xture until all xtures are connected. Up to 32 xtures can be

interconnected.

Caution: At the last xture, the DMX-cable has to be terminated with a terminator. Solder a 120 Ω resistor

between Signal (–) and Signal (+) into a 5-pin XLR-plug and plug it in the DMX-output of the last xture.

1 - Shield

2 - Signal (-)

3 - Signal (+)

4 - Not connected

5 - Not connected

1 - Shield

2 - Signal (-)

3 - Signal (+)

4 - Not connected

5 - Not connected

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Robe Équipement d'éclairage

Robe

Robe Anolis Eminere 1 MC Manuel utilisateur

Robe

Robe Color mix 575 AT Manuel utilisateur

Robe

Robe Haze 400 FT Manuel utilisateur

Robe

Robe CitySource 96 Manuel utilisateur

Robe

Robe Robin 600 Purewhite WIreless DMX Manuel utilisateur

Robe

Robe Robin 300 plasma spot Manuel utilisateur

Robe

Robe PATT 2017 Manuel utilisateur

Robe

Robe Divine 160 RGBW Manuel utilisateur

Robe

Robe Flare CB Series Manuel utilisateur

Robe

Robe Robin 600E Beam Manuel utilisateur

Robe

Robe Calumma Classic M MC Manuel utilisateur

Robe

Robe PATT 2013 Manuel utilisateur

Robe

Robe DigitalSpot 7000 DT Manuel utilisateur

Robe

Robe Anolis Ambiane XP56 Manuel utilisateur

Robe

Robe Wash 575XT Manuel utilisateur

Robe

Robe Robin CycBar UV Manuel utilisateur

Robe

Robe ROBIN LEDBeam 350 RGBA Manuel utilisateur

Robe

Robe Robin 100 LEDBeam Wireless DMX CRMX Manuel utilisateur

Robe

Robe Color Wash 575E AT Manuel utilisateur

Robe

Robe Colormix 240 AT Manuel utilisateur

Robe

Robe Image Spot 250 AT Manuel utilisateur

Robe

Robe Led Blinder 196 LT Manuel utilisateur

Robe

Robe Anolis Divine 160 RGBW/RGBA/PW/TW Manuel utilisateur

Robe

Robe ANOLIS Eminere Side 1 Manuel utilisateur

Manuels Équipement d'éclairage populaires d'autres marques

Brizo

Brizo 8SP-MU-4 Manuel utilisateur

LUCE&LIGHT

LUCE&LIGHT BROM 1.0 Manuel utilisateur

IKEA

IKEA BJÖRKSPIREA Manuel utilisateur

Laserworld

Laserworld Evolution Series ES-400RGB Manuel utilisateur

Alien

Alien RG STAR Manuel utilisateur

EuroLite

EuroLite LED B-40 Manuel utilisateur

Qazqa

Qazqa Suplux SL 3 Black 103062 Manuel utilisateur

Commercial Electric

Commercial Electric 54568141 Manuel utilisateur

CREE LIGHTING

CREE LIGHTING 304 Series Manuel utilisateur

Goobay

Goobay 49867 Manuel utilisateur

ECOMAN ITALIA

ECOMAN ITALIA LED T8 Manuel utilisateur

Alkalite

Alkalite Krypton KT-81 Manuel utilisateur

Clas Ohlson

Clas Ohlson GU10 Manuel utilisateur

DTS

DTS DELTA 10 F Manuel utilisateur

ring

ring Solar Steplight Manuel utilisateur

One Stop Gardens

One Stop Gardens 57696 Instructions de montage

Chauvet DJ

Chauvet DJ COREpar UV120 ILS Manuel utilisateur

SIREM

SIREM Swimeo A2 Manuel utilisateur