2
9) Avoid heat source: heat source should be avoided and products will be not
installed on local exposure to direct sunlight, high temperature areas; to be
away from heat sources, such as heating, heaters, heat or have other things
(including magnifier).
10) Avoid Water or Moist: device should avoid water or moist, do not let this
machine being exposed to rain or moisture in the environment (as when rain
and car washing) to avoid the internal machinery of the short circuit caused the
fire, electric shock or other danger.
11) Cleaning: before cleaning machines have to shut down power, and then
wipe panel Do not use volatile chemicals (such as gasoline or thinner) to clean
panel.
12) Avoid the matter or water into the device. to prevent foreign matter or liquid
into the inside of the machine, do not insert the foreign body from the cooling
hole or other opening into the machine. If you insert foreign bodies may cause
electric shock, machine parts within a short circuit caused the fire, such as the
risk of electric shock.
13) Installation device. do not install the unit to the truck, frame, tripod, bracket
or table without the manufacturer's recommendations, should be installed on
the install fittings which come with machines. When used in the car, pay more
attention to firm the installation of this machine, avoid the machine falling down
because of the sudden brake and resulting in personal injury.
14) Don't operate the machine in the event of rain or lightning for a long time,
have to cut off the machine power.
15) Appear in the following situations, please turn off the local power supply in
time, and contact with professional technician.
A. When the power wire or connector damaged.
B. When the machines were splashed with liquid or when the entry of foreign
matter;
C. when the machine has been rained or moisture attack;
Funition Operation
3
D. when the machine crashed from a height or as a result of abnormal
operation or unreasonable damage caused.
16) LCD Display: do not let the machine decline to avoid LCD screen
fragmentation, if so, when the outflow of liquid crystal, do not touch the liquid
crystal, so as not to be harmed. Do not heat the liquid crystal display or
scratching LCD with sharp objects, touch panel is also susceptible to
scratching. The effective pixel of LCD screen is more than 99.99 percent, but
0.01 percent of the pixels could not be lighten normally.
Notice before Installation
Products of the manufacturers recommend that you do not install or repair
their navigation systems by yourself. Installation and maintenance of the
product may cause you in danger of electric shock or others, for all installation
and maintenance operations of this navigation system please entrust to the
service center authorized by manufacturer.
Forbid to use the following dangerous installing ways and location:
1. When the car in a sudden stop may cause injury on the driver and passengers.
2. To avoid the possibility that impeded the operation of the vehicle drivers, such as
the driver front seat or the floor near the steering wheel, stick shift.
Before opening the hole from faceplate in the dashboard panel, make sure
that the rear space is enough. Be careful, not to damage the fuel cable, brake
cable, electrical components, power lines or cable communications.
When use the screws, please ensure that they are not contact with any
electrification down-lead. Vibration may have damaged wire or insulation skin
and lead to a short circuit or other damage to the vehicle.
In order to ensure proper installation, use the standard method of installation of
the required components. If you use any non-standard components, this product can
be internal damaged or loose components, leading to damage of the Product.
If the GPS antenna may lead to the winding column or stick shift that would
Funition Operation
