www.ritm.ru 7of 108
Operating Manual Contact GSM-5-2 RITM-LINK
Built-in modem and communication channels
The built-in modem allows to send the information about the occurring
events to the monitoring software, as well as to the property owner. The
panel supports up to two SIM cards. The system can be set up as to send
an SMS message about the occurring event to the end user.
Additionally a 5RT1 wired modem can be installed into the panel. Than
the Panel could transfer data to the “Contact” central monitoring station
over the land line using the DTMF mode.
Also the “Contact LAN” communication device can be mounted on the
panel in order to connect twisted pair cable to operate via a computer
network.
Wire loops
The panel can connect up to 8 dry contact wire loops or up to 16
resistive wire loops simultaneously.
WARNING! The type is specied for all loops at the same time.
The panel can not work with resistive loops and dry contact loops
at the same time.
Wired keypads
The following devices are supported as control and indication devices:
• Wired “KB1”
• Wired touch keypad “LCD KB2”.
Keypads are used to arm and disarm areas and zones using digital codes
individually, to control area and zone visually and to generate alarm
events.
Each panel can host up to 15 wired keypads. The panel can process up
to 255 code combinations.
Keypads fully duplicate visual indication and outgoing delay audio
signals, arming and disarming signals.
