Risco ProSYS 16 Manuel utilisateur

User's Manual

For use with ProSYS 16, ProSYS 40,

and ProSYS 128

Your local installer: www.eaglesecuritysolutions.co.uk

2 ProSYS User's Manual

Important Notice

This manual is delivered subject to the following conditions and restrictions:

)This manual contains proprietary information belonging to RISCO

Group. Such information is supplied solely for the purpose of assisting

explicitly and properly authorized users of the system.

)No part of its contents may be used for any other purpose, disclosed to

any person or firm or reproduced by any means, electronic or

mechanical, without the express prior written permission of RISCO

Group.

)The text and graphics are for the purpose of illustration and reference

only. The specifications on which they are based are subject to change

without notice.

)Information in this document is subject to change without notice.

Corporate and individual names and data used in examples herein are

fictitious unless otherwise noted.

RTTE Declaration of Conformity

Hereby, RISCO Group, declares that this control panel (ProSYS128,

ProSYS40, ProSYS16), with wired accessories (including cables) and

wireless accessories, is in compliance with the essential requirements and

other relevant provisions of Directive 1999/5/EC.

For the CE Declaration of Conformity please refer to our website:

www.riscogroup.com.

ProSYS User's Manual 3

Table of Contents

SUMMARY OF USER COMMANDS...............................................................6

CHAPTER 1: INTRODUCTION........................................................................ 8

Operating the System..........................................................................9

The ProSYS Family...............................................................................10

Terms and Definitions.........................................................................11

CHAPTER 2: YOUR KEYPAD ....................................................................... 13

Keypad Types..................................................................................... 13

LED Indicators ..................................................................................... 14

Power/ LED...................................................................................14

Arm/ LED ......................................................................................15

Ready/ LED.................................................................................15

Bypass/ LED ..........................................................................16

Fire/ LED ........................................................................................16

Tamper/ LED................................................................................16

Zone LEDs..........................................................................................17

Keys.....................................................................................................17

Numerical Keys................................................................................17

Function Keys (A, B, C and D).......................................................17

Control Keys .....................................................................................18

Emergency Keys ................................................................................ 18

Quick Key Operation......................................................................19

LCD Status Display..............................................................................19

LCD Blank Display ..............................................................................19

CHAPTER 3: ARMING AND DISARMING THE SYSTEM............................... 20

Arming................................................................................................. 20

Away Arming ...................................................................................20

Stay Arming......................................................................................21

4 ProSYS User's Manual

Partition Arming...............................................................................22

Arming Multiple Partitions...............................................................23

Group Arming..................................................................................24

Quick Arming ...................................................................................24

Force Arming....................................................................................25

Wireless Button Arming ...................................................................25

Proximity Tag Arming ......................................................................25

Keyswitch Arming............................................................................25

Access Control Arming...................................................................25

Disarming............................................................................................ 26

Disarming the System......................................................................26

Silencing an Alarm..........................................................................26

Partition Disarming...........................................................................27

Duress Disarming..............................................................................28

Disabling the Fire Alarm (Switch Auxiliary)...................................29

CHAPTER 4: ZONE BYPASSING..................................................................30

CHAPTER 5: ACTIVATING HOME APPLIANCES (UOS) .............................. 32

Activating Home Appliances from the User Functions Menu.........33

Activating Home Appliances by Entering a Code.......................... 33

CHAPTER 6: SETTING FOLLOW ME DESTINATIONS....................................34

CHAPTER 7: USER CODES ..........................................................................36

Setting and Changing User Codes................................................... 36

Deleting User Codes ..........................................................................37

User Authority Levels.......................................................................... 38

Entering User Labels........................................................................... 39

Character Table..............................................................................40

Assigning Double Codes...................................................................41

CHAPTER 8: VIEWING TROUBLE CONDITIONS..........................................42

CHAPTER 9: SETTING AND CHANGING SYSTEM TIME AND DATE ............43

Setting and Changing System Time.................................................. 43

ProSYS User's Manual 5

Setting and Changing System Date .................................................44

CHAPTER 10: DEFINING WEEKLY SCHEDULES ...........................................45

Automatic Arming/Disarming........................................................... 45

Defining a UO Activation Schedule..................................................48

Defining a User Limitation Schedule................................................. 50

CHAPTER 11: PROGRAMMING FUNCTION KEYS...................................... 52

Using the Arm Key to Program Function Keys ................................. 53

CHAPTER 12: PROXIMITY KEYPAD............................................................. 55

Adding a New Proximity Tag............................................................. 55

Deleting a Proximity Tag By the User Serial Number....................... 56

Deleting a Proximity Tag By the User Tag......................................... 57

Using a Proximity Tag......................................................................... 58

CHAPTER 13: COMPLETE MENU OF USER FUNCTIONS..............................59

APPENDIX A: SYSTEM TROUBLES ...............................................................66

APPENDIX B: SYSTEM SOUNDS..................................................................68

APPENDIX C: SCHEDULING TABLES........................................................... 70

6 ProSYS User's Manual

Summary of User Commands

Away Arm Hold the tag close to the keypad's keys

-OR-

Code> /

Stay Arm Code> /

Group Arm Code>A/B/C/D

Partition Away Arm Hold the tag close to the keypad's keys > Partition

No. > /

-OR-

Code> />Partition No. > /

Partition Stay Arm Code> / >Partition No. > /

Partition Group Arm Code>A/B/C/D > Partition No. > A/B/C/D

System Disarm Hold the tag close to the keypad's keys

-OR-

Code> /

Partition Disarm Hold the tag close to the keypad's keys > Partition

No. > /

-OR-

Code> / > Partition No. > /

Duress Disarm Duress Code > /

Silence an Alarm Hold the tag close to the keypad's keys

-OR-

Code> /

Bypass Zones >[1]>[1]>[Code]> / >[Zone No.]

Activate Utility

Output >[2]>[1]>[Code] > / [UO No.]

Define Follow-Me >[2]>[7]>[Code]>/

Enable Installer

Menu >[7]>[1]>[Installer Code]> /

View Trouble >[3]>[1]>[Code]>/

View Alarm Memory >[3]>[2]>[Code]> /

ProSYS User's Manual 7

View Zone Status >[3]>[4]>[Code]> /

View Event Log >[3]>[5]>[Manager Code]> /

Bell/Strobe/Keypad

Test >[4]>[Code]> / >[1]

Zone Testing (Walk

Test) >[4]>[Grand Master Code]> / >

[0]>[1]

Local Chime On/Off >[4]>[Code]> / >[4]/[3]

Edit User Code >[5]>[Code]> / >[1]

Edit Time >[6]>[Grand Master Code]> / >[1]

Edit Date >[6]>[Grand Master Code]> / >[2]

Automatic

Arming/Disarming >[6]>[Grand Master Code]> / >[5]

>[Schedule No]>[1]

8 ProSYS User's Manual

Chapter 1: Introduction

Congratulations on your purchase of RISCO Group's ProSYS Security

System. The ProSYS has been specifically designed to meet a wide range

of security needs for many residential and commercial applications.

The ProSYS includes the most advanced communication capabilities for

dual or triple-path communication to Monitoring Stations (MSs) using

telephone lines, GSM/GPRS network or TCP/IP network. It consists of a

variety of sensors, detectors, and contacts placed throughout the premises.

It is designed to recognize abnormal conditions and inform the system of

the status of any protected door, window, hallway, room, or area.

The Main Panel, which contains the system's electronics and backup

battery, functions in the background. For security purposes, it is

recommended that it be installed out of sight.

You can place a household appliance or premises lighting under the control

of the ProSYS, where it can be conveniently turned on and off

automatically or by user command from any system keypad, as described

on page 32.

In addition, the ProSYS supports the following optional RISCO Group

devices:

)Advanced Communication Module that enables the system to operate

over the IP network.

)GSM/GPRS module which enables the system to communicate over

the GSM/GPRS network, and also send or receive SMS commands.

)Access Control, which enables integrating access control capabilities

into your security system.

)Digital Voice Module which enables you to receive voice messages,

operate the system from a remote phone, and listen- in or speak to the

premises.

ProSYS User's Manual 9

Operating the System

The ProSYS can easily be operated locally or remotely depending on the

devices connected to the system.

You can issue commands to the system and in turn, the system will

communicate information to you via its display, indicators, voice messages,

SMS messages, Email messages and by the sounds it makes.

The ProSYS can be operated in the following ways:

)Locally through its keypad(s). There are two types of keypads: one with

an LED, and the other with an LCD. Using its keys, you can issue

commands to your system. In turn, the system can communicate

information to you via its display, indicators and by the sounds it

makes. See page 13 for a description of the different types of keypads.

)Locally or remotely using RISCO Group’s Upload/ Download software.

The Upload/Download software enables the installer to program the

system, and enables the user to operate the system and to view

system status.

)If your system is appropriately equipped, it can be armed using a

keyswitch, proximity tag or a wireless button key. These features must

be programmed by your installer.

)If your system is equipped with RISCO Group's GSM/GPRS module it

can provide information about the system by SMS and enable

operation of the system using SMS commands for arming the system,

disarming the system and more. For details information refer to the

manual provided with the GSM/GPRS module.

)If your system includes the Voice module, it can provide audible

information about system status, and enable any remote, touch-tone

(DTMF) telephone to act as a keypad for the system. Upon event

occurrence, such as alarm activation, the Voice module informs you of

a security situation by calling you and playing a prerecorded Event

announcement, as described in the Voice Module Programming and

10 ProSYS User's Manual

Operations Manual.

The first task to be performed before operating the system is Setting and

Changing User Codes, as described on page 36.

NOTE:

A certified serviceman should do all repairs and maintenance including

replacement of the device battery.

The ProSYS Family

This manual is intended for all three types of panels in the ProSYS family.

The following table lists the number of features in each type of panel.

Feature ProSYS

16 ProSYS

40 ProSYS

128

Total Zones 8 - 16 8 - 40 8 - 128

User Codes 30 60 99

Utility Outputs 6 - 22 6 - 38 6 - 70

Follow-Me

Destinations 8 8 16

Maximum Keypads 8 12 16

Partitions 4 4 8

Weekly Schedules 8 16 32

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Risco Système de sécurité

Risco

Risco LightSYS Manuel utilisateur

Risco

Risco WiComm Pro Manuel utilisateur

Risco

Risco lightsys 2 Manuel utilisateur

Risco

Risco Agility 3 Guide de l'utilisateur

Risco

Risco Agility 4 Manuel d'instructions

Risco

Risco Agility Manuel utilisateur

Risco

Risco LightSYS Instructions de montage

Risco

Risco Agility Manuel utilisateur

Risco

Risco LightSYS 2 Series Instructions de montage

Risco

Risco Agility Manuel utilisateur

Risco

Risco ProSYS Plus Manuel d'instructions

Risco

Risco LIGHT SYS 2 Manuel d'instructions

Risco

Risco WiComm Manuel utilisateur

Risco

Risco Agility 3 Manuel utilisateur

Risco

Risco Agility Manuel utilisateur

Risco

Risco Agility Manuel utilisateur

Risco

Risco LightSYS Manuel utilisateur

Risco

Risco LSC AGILITY 4 Manuel utilisateur

Risco

Risco LightSYS Manuel utilisateur

Risco

Risco WiComm Pro Manuel utilisateur

Risco

Risco LightSYS Instructions de montage

Risco

Risco ProSYS Plus Manuel d'instructions

Risco

Risco ProSYS Manuel du propriétaire

Risco

Risco Agility 4 Manuel utilisateur

Manuels Système de sécurité populaires d'autres marques

Inner Range

Inner Range Concept 2000 Manuel utilisateur

Climax

Climax Mobile Lite R32 Instructions de montage

CADDX

CADDX NX-6 Manuel utilisateur

FBII

FBII XL-31 Series Manuel utilisateur

Johnson Controls

Johnson Controls PENN Connected PC10 Manuel utilisateur

Aeotec

Aeotec Siren Gen5 Manuel utilisateur

Blaupunkt

Blaupunkt SA 2700 Manuel utilisateur

IDEAL

IDEAL Accenta Manuel du propriétaire

AJAX

AJAX DoubleButton Manuel utilisateur

Swann

Swann SW-P-MC2 Manuel utilisateur

Ecolink

Ecolink Siren+Chime Manuel utilisateur

Digital Monitoring Products

Digital Monitoring Products XR150 Manuel utilisateur

EDM

EDM Solution 6+6 Wireless-AE Manuel utilisateur

Highway Safety Group

Highway Safety Group EA401 Manuel utilisateur

Siren

Siren LED GSM Manuel utilisateur

Detection Systems

Detection Systems 7090i Instructions de montage

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuel utilisateur

Siemens

Siemens FDM273 Manuel utilisateur