3
Setting the alarm
• In ALARM mode. Press and HOLD the LAP/RESET button for 3 seconds and the hours will begin
to flash.
• Press START/STOP to set the hour.
• Press MODE the minutes will be flashing, press START/STOP to set the minutes.
• Press LAP/RESET to finish setting.
CANDY 2 DIGITAL WATCH
Chronograph mode (ST - stopwatch)
• In (ST) CHRONOGRAPH mode.
• Press START/STOP to start the chronograph.
• Press START/STOP to stop the chronograph.
• Press LAP/RESET to reset the chronograph to zero.
• NOTE: In normal time screen you can Hold LAP/RESET and then Push START/STOP to turn on or off
the hourly chime “ ” and daily alarm “ ”.
Chronograph Mode. (Stopwatch)
• Press the MODE button to enter the Chronograph mode.
• Push START/STOP to start the Chronograph.
• Push START/STOP to stop the chronograph.
• Push LAP/RESET to reset the chronograph to zero
Using the Chronograph Lap Function.
• Press the MODE button to enter the Chronograph mode.
• Push START/STOP to start the Chronograph.
• Push LAP/RESET to stop the chronograph’s 1
st
Lap
• Push LAP/RESET to restart the chronograph and it will have continued the count and now will display the
full time elapsed.
• Push START/STOP to completely stop the Chronograph.
• Push LAP/RESET to reset the chronograph to zero.
DAY/DATE/TIME WATCHES
To Change time:
1.Pull crown out fully to point C. 2.Turn crown to move hands to the
correct time. 3.Push crown back in fully to point A.
To Change Date: (If applicable)
1.Pull crown out to point B; 2.Turn crown clockwise to current date
(For some models, please turn counter-clockwise.) 3.Push crown back in
fully to point A.
The Date will automatically change just before midnight.
To Change Day: (If applicable)
1.Pull crown out to point B; 2.Turn crown counterclockwise to current day
(For some models, please turn clockwise.) 3.Push crown back in fully to
point A.
The Day will automatically change just before midnight.
WARNING!
For your watch to be properly sealed, the crown must be fully pushed in.
Never pull out the crown when your watch is in water or is wet.
30
• NOTE: In normal time screen you can Hold LAP/RESET and then Push START/STOP to turn on or off
the hourly chime “ ” and daily alarm “ ”.
Chronograph Mode. (Stopwatch)
• Press the MODE button to enter the Chronograph mode.
• Push START/STOP to start the Chronograph.
• Push START/STOP to stop the chronograph.
• Push LAP/RESET to reset the chronograph to zero
Using the Chronograph Lap Function.
• Press the MODE button to enter the Chronograph mode.
• Push START/STOP to start the Chronograph.
• Push LAP/RESET to stop the chronograph’s 1
st
Lap
• Push LAP/RESET to restart the chronograph and it will have continued the count and now will display the
full time elapsed.
• Push START/STOP to completely stop the Chronograph.
• Push LAP/RESET to reset the chronograph to zero.
DAY/DATE/TIME WATCHES
To Change time:
1.Pull crown out fully to point C. 2.Turn crown to move hands to the
correct time. 3.Push crown back in fully to point A.
To Change Date: (If applicable)
1.Pull crown out to point B; 2.Turn crown clockwise to current date
(For some models, please turn counter-clockwise.) 3.Push crown back in
fully to point A.
The Date will automatically change just before midnight.
To Change Day: (If applicable)
1.Pull crown out to point B; 2.Turn crown counterclockwise to current day
(For some models, please turn clockwise.) 3.Push crown back in fully to
point A.
The Day will automatically change just before midnight.
WARNING!
For your watch to be properly sealed, the crown must be fully pushed in.
Never pull out the crown when your watch is in water or is wet.
30
• The Alarm indicator will automatically appear.
• Press START/STOP to toggle on / off the Alarm and hourly chime
• NOTE: In normal time screen you can Hold LAP/RESET and then Push START/STOP to turn on or off
the hourly chime “ ” and daily alarm “ ”.
Chronograph Mode. (Stopwatch)
• Press the MODE button to enter the Chronograph mode.
• Push START/STOP to start the Chronograph.
• Push START/STOP to stop the chronograph.
• Push LAP/RESET to reset the chronograph to zero
Using the Chronograph Lap Function.
• Press the MODE button to enter the Chronograph mode.
• Push START/STOP to start the Chronograph.
• Push LAP/RESET to stop the chronograph’s 1
st
Lap
• Push LAP/RESET to restart the chronograph and it will have continued the count and now will display the
full time elapsed.
• Push START/STOP to completely stop the Chronograph.
• Push LAP/RESET to reset the chronograph to zero.
DAY/DATE/TIME WATCHES
To Change time:
1.Pull crown out fully to point C. 2.Turn crown to move hands to the
correct time. 3.Push crown back in fully to point A.
To Change Date: (If applicable)
1.Pull crown out to point B; 2.Turn crown clockwise to current date
(For some models, please turn counter-clockwise.) 3.Push crown back in
fully to point A.
The Date will automatically change just before midnight.
To Change Day: (If applicable)
1.Pull crown out to point B; 2.Turn crown counterclockwise to current day
(For some models, please turn clockwise.) 3.Push crown back in fully to
point A.
The Day will automatically change just before midnight.
WARNING!
For your watch to be properly sealed, the crown must be fully pushed in.
Never pull out the crown when your watch is in water or is wet.
30
Using the Chronograph lap function
• Press START/STOP to start the chronograph.
• Press LAP/RESET to hold a lap time on the screen.
• Press LAP/RESET to restart the chronograph and display entire elapsed time since starting the
chronograph.
• Press START/STOP to stop the chronograph.
• Press LAP/RESET to reset the chronograph to zero.
Chrono (ST Stopwatch)Alarm
![Rip curl FUNCTION. ANALOGUE DIGITAL TIDE [AVERAGING] Manuel utilisateur](/data/manuals/ua/m/uamj/sources/rip-curl-function-analogue-digital-tide-averaging--manual.jpg "Rip curl FUNCTION. ANALOGUE DIGITAL TIDE [AVERAGING] Manuel utilisateur")
