Ringway TD90II Manuel utilisateur
TD90II
User s Manual
Electronic Drum
Precaution
Thank you for purchasing this electronic instrument.For perfect operation and
security, please read the manual carefully and keep it for future reference.
The lightning flash with arrowhead symbol within an equilateral triangle
is intended to alert the user to the presence of uninsulated dangerous
voltage within the product s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance(servicing)
instructions in the literature accompanying the product.
Safety Precautions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation
openings,install in accordance with the
manufacturer s instructions.
8) Do not install near the heat sources such as
radiators, heat registers,stoves,or other
apparatus (including amplifiers) that produce
heat.
9) Do not defeat the safety purpose of the
polarized or grounding-type plug.A
polarizedplug hase two blades with one
wider than the other.Agrounding type plug
has two blades and a third grounding
prong.The wide blade or the third prong are
provided for your safety,if the provided plug
does not fit into your outlet.consult an
electrician for replacement of the obsolete
apparatus. When a cart is used,use caution
when moving the cart/apparatus combination
to avoid injury from tip-over(Figure 1).
13) Unplug this apparatus during lightning
storms or when unused for a long periods fo
time.
14) Refer all servicing to qualified service
personnel.
Servicing is required when the apparatus has
been damaged in any way,such as power-
supply cord or plug is damaged,liquid has
been spilled or objects have fallen into the
apparatus,the apparatus has been exposed to
rain or moisture,does not operate normally,
or has been dropped.
WARNING:To reduce the risk of fire or
electric shock,do not expose this apparatus to
rain or moisture.
CAUTION:Apparatus shall not be exposed
to dripping or splashing and no objects filled
with liquids,such as vases,shall be placed on
the apparatus.
(Figure 1)
Contents
1
Electronic Drum
Panel Controls ..............................................................................................................2
Assembly Instruction .....................................................................................................4
Connection..................................................................................................................8
..................................................................................................10
1.Switch the Power On ................................................................................................10
2.Set the Main Volume ................................................................................................10
3.Enter and Return .....................................................................................................10
4.Tempo......................................................................................................................10
5.Select Drum Kits ......................................................................................................11
6.Kit ..........................................................................................................................12
7.Effect ...................... ................................................................................................21
8.Pad .........................................................................................................................21
9.Click ........................................................................................................................22
10.Song .....................................................................................................................23
11.Drum On/Off ..........................................................................................................24
12.Start/Stop ..............................................................................................................24
13.Rec/Play ................................................................................................................25
.............................................................................................................27
Content of LED-Display................................................................................................29
Drum Kits List .............................................................................................................30
Voice List ................. ..................................
............................................
.................................................
..................................................
Start to Play the Drum
14.Factory Set
................. ............................. ..................31
Song List........................................................................ .34
MIDI Implementation Chart ........................................ 35
Specifications............................................................ 36
BD KICKBD KICK
CRASHCRASH
RIDERIDE TOM3TOM3 TOM2TOM2 TOM1TOM1 SNARESNARE HI-HATHI-HAT HH-CTRLHH-CTRL MASTERMASTER
OUTOUT
AUX INAUX IN
MIDI OUTMIDI OUT
MIDI INMIDI IN
POWERPOWER
ONON OFFOFF
Panel Controls
Front Panel
Rear Panel
26 25 24 23 22 21 20 27
DC 9V
28 29 30
31
2
In [KIT] Mode
In [PAD] Mode
In [SONG] Mode
Electronic Drum
1
2
345
6
7
8
9
10
11 12
13 14 15 16 17 18 19
32
TD90IITD90II
MIN MAXMIN MAX
VOLUMECONTROLSVOLUMECONTROLS
TEMPOTEMPO
ENTERENTER
KITKIT PADPAD
EFFECTEFFECT
CLICKCLICK
SONGSONG REC/
PLAY
REC/
PLAY
DRUM
ON/OFF
DRUM
ON/OFF
START/
STOP
START/
STOP
CLICKCLICKCHOOSE: LEVEL/TIMESIGNATURES/SOUNDCHOOSE:LEVEL/TIME SIGNATURES/SOUND
REC/PLAYREC/PLAY
CHOOSE:RECORD/PLAY/CLEARCHOOSE:RECORD/PLAY/CLEAR
CHOOSE:M01,M02,M03 START/STOPCHOOSE:M01,M02,M03 START/STOP
ADJUST:VOLUMEADJUST:VOLUME
CHOOSE:M01,M02,M03 START/STOPCHOOSE:M01,M02,M03 START/STOP
SONGSONGSONG SELECT START/STOPSONGSELECT START/STOP
ADJUST:VOLUMEADJUST:VOLUME
TORESETA FUNCTION TO FACTORY DEFAULT VALUES, PRESS
+ AND - WHILEPRESSINGTHE DESIRED FUNCTION KEY.
FUNCTIONSTHAT CAN BE RESET ARE KIT, PAD, EFFECT, CLICK
AND REC/PLAY.
TORESETA FUNCTION TO FACTORY DEFAULT VALUES, PRESS
+ AND - WHILEPRESSINGTHE DESIRED FUNCTION KEY.
FUNCTIONSTHAT CAN BE RESET ARE KIT, PAD, EFFECT, CLICK
AND REC/PLAY.
CHOOSE:M01,M02,M03CHOOSE:M01,M02,M03
KITKIT CHOOSE:PAD/EFFECT / COPYKIT/TRIGGERCHOOSE:PAD/EFFECT / COPYKIT/TRIGGER
PADSELECT:HHC,HH,BD/KICK,SN,T1,T2,T3,CR,RIPADSELECT:HHC,HH,BD/KICK,SN,T1,T2,T3,CR,RI
ADJUST:INSTRUMENT/LEVEL/SENSITIVITY/
THRESHOLD/VELOCITYCURVE
ADJUST:INSTRUMENT/LEVEL/SENSITIVITY/
THRESHOLD/VELOCITYCURVE
CHOOSE:REVERB/CHORUSCHOOSE:REVERB/CHORUS
ADJUST:TYPE/LEVELADJUST:TYPE/LEVEL
R1,R2,R3,H1,H2,PLA,DLY,PDL,OFFR1,R2,R3,H1,H2,PLA,DLY,PDL,OFF
ADJUST:TYPE/LEVELADJUST:TYPE/LEVEL
CH1,CH2,CH3,CH4,FB,
FLG,SDL,FDL,OFF
CH1,CH2,CH3,CH4,FB,
FLG,SDL,FDL,OFF
COPYTO POSITION:26-30COPYTO POSITION:26-30
MAINMENUMAINMENU
MASTERMASTER PHONESPHONES AUX INAUX IN
HH-CTRLHH-CTRL HI-HATHI-HAT SNARESNARE TOM1TOM1 TOM2TOM2 TOM3TOM3 RIDERIDE
CRASHCRASH
BDKICKBDKICK
PHONESPHONES
MIN MAXMIN MAX MIN MAXMIN MAX
SAME/INDIVIDUALSAME/INDIVIDUAL
Front Panel
1. LED Display
2. DATA DIAL
3. [MASTER VOLUME] knob
4. [PHONES VOLUME] knob
5. [AUX IN VOLUME] knob
6. [TEMPO+] button
7. [TEMPO-] button
8. [ENTER] button
9. [RETURN] button
10. [+/-] button
11. [KIT] button
[EFFECT] button
[PAD] button
[CLICK] button
12. [SONG] button
[DRUM ON/OFF] button
[REC/PLAY] button
[START/STOP] button
Indicator Lamp
13. [HH-CTRL]
14. [HI-HAT]
15. [BD KICK]
16. [SNARE]
17. [TOM1]
[TOM2]
[TOM3]
18. [CRASH]
19. [RIDE]
Rear Panel
20. [HH-CTRL] jack
21. [HI-HAT] jack
22. [BD KICK] jack
23. [SNARE] jack
24. [TOM1] jack
[TOM2] jack
[TOM3] jack
25. [CRASH] jack
26. [RIDE] jack
27. [AUX IN] jack
28. [MASTER OUT] jack
29. [MIDI IN] jack
[MIDI OUT] jack
30. DC 9V
31. POWER ON/OFF
32. PHONES jack
3
Electronic Drum
4
1
2
3
1.Take out the left drum stand
from packing case, open the
stand as shown in the figure,
and tightenthe screw.
2.Take out the right drum stand
from packing case, open the
stand as shown in the figure,
and tighten the screw.
3.Insert the mid-tube into left
and right support rack clamps,
tighten the set-screw with
your tuning key.
Set up the knighthead, tighten
the set-screw with your tuning
key.
Drum Stand Assembly
Assembly Instruction
Electronic Drum
(1)(1)
(2) (2)
5
4
4.Take out three Tom pads from
the packing case, insert the rod
into pad hole as shown in the
figure, set to a fine-position
and tighten the screw.
5
5.Take out snare from the packing
case, insert the rod into pad hole
as shown in the figure, set to a
fine-position and tighten the
screw.
6.Assemble crash cymbals as
shown in the figure, and
tighten the T-screw.
6
Electronic Drum
7
7.Assemble Hi-Hat as shown in
the figure, and tighten the
T-screw.
8
8.Insert the module into the rack
clamp as shown in the figure,
and tighten the T-screw.
9
6
Electronic Drum
9.Attach drum pedal to the
batter side hoop with hoop
holder clamp and tighten the
T-screw.
Insert the beater shaft into
the beater link and tighten
the key bolt.
7
CRASHCRASH
RIDERIDE TOM3TOM3 TOM2TOM2 TOM1TOM1 SNARESNARE BD KICKBD KICK HI-HATHI-HAT HH-CTRLHH-CTRL MASTERMASTER
OUTOUT
AUX INAUX IN
MIDIOUTMIDI OUT
MIDIINMIDIIN
DC 9V
Caution!
To prevent electric shock and damage to the devices, make sure the
power is switched OFF on the drum and all related device before making
any connection.
Connecting the Pads and Pedals
Using the provided cables, connect each Trigger input jack on the rear
panel of the module and make sure each pad is connected to its
corresponding Trigger input jack.
TO CRASH TO RIDE
TO HI-HAT
TO TOM1 TO TOM2
TO TOM3
TO SNARE
TO HH-CTRL
TO BD KICK
Electronic Drum
Table des matières
Autres manuels Ringway Tambour
